| 1 | //! realme Buds T310. Spec: docs/protocol/realme_t310.md |
| 2 | //! |
| 3 | //! `frame.rs` and `link.rs` hold the protocol family's framing and request/reply logic; |
| 4 | //! `codec.rs` holds everything specific to the T310. |
| 5 | |
| 6 | use std::time::{Duration, Instant, SystemTime, UNIX_EPOCH}; |
| 7 | |
| 8 | use crate::bluez::PairedDevice; |
| 9 | use crate::bt::Uuid; |
| 10 | use crate::devices::{Device, Session}; |
| 11 | use crate::error::{Error, Kind, Result}; |
| 12 | use crate::status::{ |
| 13 | BudFit, GestureChange, NoiseControl, NoiseMode, RawWrite, Status, Switch, TouchChange, TouchControls, |
| 14 | }; |
| 15 | use crate::transport::Transport; |
| 16 | |
| 17 | mod codec; |
| 18 | mod frame; |
| 19 | mod link; |
| 20 | |
| 21 | use codec::Commands; |
| 22 | use link::Link; |
| 23 | |
| 24 | /// When to read a setting back after the buds ack a write. Spec: realme_t310.md#write-read-back |
| 25 | #[derive(Clone, Copy)] |
| 26 | struct ReadBack { |
| 27 | /// How long after the ack the first read goes out. |
| 28 | first: Duration, |
| 29 | /// How long after the ack budctl gives up. |
| 30 | window: Duration, |
| 31 | } |
| 32 | |
| 33 | /// Spec: realme_t310.md#write-read-back |
| 34 | const READ_BACK: ReadBack = ReadBack { |
| 35 | first: Duration::ZERO, |
| 36 | window: Duration::from_secs(2), |
| 37 | }; |
| 38 | /// Game mode lands about 1 s after the ack. Spec: realme_t310.md#switch-write |
| 39 | const GAME_READ_BACK: ReadBack = ReadBack { |
| 40 | first: Duration::from_secs(1), |
| 41 | window: Duration::from_secs(3), |
| 42 | }; |
| 43 | /// The gesture table is read back about 600 ms after the ack. Spec: realme_t310.md#gesture-write |
| 44 | const TOUCH_READ_BACK: ReadBack = ReadBack { |
| 45 | first: Duration::from_millis(600), |
| 46 | window: Duration::from_secs(2), |
| 47 | }; |
| 48 | /// How long budctl waits for the fit-test result after the ack: Buds 4 take about 8.6 s. |
| 49 | /// Spec: realme_t310.md#fit-test |
| 50 | const FIT_TEST_WAIT: Duration = Duration::from_secs(15); |
| 51 | /// Spec: realme_t310.md#write-read-back |
| 52 | const READ_BACK_PAUSE: Duration = Duration::from_millis(300); |
| 53 | |
| 54 | /// The switches budctl may write, each added after the previous one passed its hardware |
| 55 | /// checkpoint (CLAUDE.md rule 4). Spec: realme_t310.md#switch-write |
| 56 | const WRITABLE_SWITCHES: [(&str, ReadBack); 5] = [ |
| 57 | ("game", GAME_READ_BACK), |
| 58 | ("bass-boost", READ_BACK), |
| 59 | ("spatial", READ_BACK), |
| 60 | ("wind", READ_BACK), |
| 61 | ("dual", READ_BACK), |
| 62 | ]; |
| 63 | |
| 64 | fn on_off(on: bool) -> &'static str { |
| 65 | if on { "on" } else { "off" } |
| 66 | } |
| 67 | |
| 68 | /// Spec: realme_t310.md#identity |
| 69 | const BLUETOOTH_NAME: &str = "realme Buds T310"; |
| 70 | |
| 71 | /// Control services, in the order to try. Spec: realme_t310.md#transport |
| 72 | const SERVICES: [Uuid; 2] = [ |
| 73 | Uuid::from_u128(0x0000_079A_D102_11E1_9B23_0002_5B00_A5A5), |
| 74 | Uuid::from_u128(0x0000_1107_D102_11E1_9B23_0002_5B00_A5A5), |
| 75 | ]; |
| 76 | |
| 77 | /// Quiet time after connecting, before the first request. Spec: realme_t310.md#init |
| 78 | const SETTLE: Duration = Duration::from_millis(300); |
| 79 | |
| 80 | pub struct RealmeT310; |
| 81 | |
| 82 | impl Device for RealmeT310 { |
| 83 | fn name(&self) -> &'static str { |
| 84 | BLUETOOTH_NAME |
| 85 | } |
| 86 | |
| 87 | fn matches(&self, device: &PairedDevice) -> bool { |
| 88 | device.name == BLUETOOTH_NAME |
| 89 | } |
| 90 | |
| 91 | fn rfcomm_uuids(&self) -> &'static [Uuid] { |
| 92 | &SERVICES |
| 93 | } |
| 94 | |
| 95 | fn open(&self, transport: Box<dyn Transport>) -> Result<Box<dyn Session>> { |
| 96 | Ok(Box::new(T310Session::open(Link::new(transport, unix_time))?)) |
| 97 | } |
| 98 | } |
| 99 | |
| 100 | fn unix_time() -> u32 { |
| 101 | let seconds = SystemTime::now().duration_since(UNIX_EPOCH).map_or(0, |d| d.as_secs()); |
| 102 | u32::try_from(seconds).unwrap_or(u32::MAX) |
| 103 | } |
| 104 | |
| 105 | struct T310Session { |
| 106 | link: Link, |
| 107 | commands: Commands, |
| 108 | /// Whether the session subscribed to fit-test results. Spec: realme_t310.md#subscribe |
| 109 | fit_results: bool, |
| 110 | } |
| 111 | |
| 112 | /// Collects what a series of best-effort reads produced. |
| 113 | #[derive(Default)] |
| 114 | struct Reads { |
| 115 | warnings: Vec<String>, |
| 116 | answered: usize, |
| 117 | } |
| 118 | |
| 119 | impl T310Session { |
| 120 | /// The session start. Spec: realme_t310.md#init |
| 121 | fn open(mut link: Link) -> Result<Self> { |
| 122 | link.pump_until(Instant::now() + SETTLE)?; |
| 123 | |
| 124 | let bitmap = link.request(codec::HANDSHAKE, &[]).map_err(|error| match error { |
| 125 | // Provisional until checkpoint HW1: a link that connects but stays silent is most |
| 126 | // likely held by another app. Spec: realme_t310.md#open |
| 127 | Error::Timeout(_) => Error::ChannelBusy("connected, but the buds did not answer the handshake".to_owned()), |
| 128 | other => other, |
| 129 | })?; |
| 130 | let commands = Commands::parse(&bitmap)?; |
| 131 | |
| 132 | let product = codec::decode_product_id(&link.request(codec::PRODUCT_ID, &[])?)?; |
| 133 | if product != codec::T310_PRODUCT_ID { |
| 134 | return Err(Error::WrongModel { |
| 135 | expected: BLUETOOTH_NAME, |
| 136 | found: format!("{product:06X}"), |
| 137 | }); |
| 138 | } |
| 139 | |
| 140 | let offered = codec::decode_events_offered(&link.request(codec::EVENTS_OFFERED, &[])?)?; |
| 141 | let subscription = codec::subscribe_payload(&offered, &commands); |
| 142 | let mut fit_results = false; |
| 143 | if commands.allows(codec::SUBSCRIBE) && subscription.len() > 1 { |
| 144 | // Some buds never acknowledge this, so budctl does not wait. Spec: realme_t310.md#subscribe |
| 145 | link.send(codec::SUBSCRIBE, &subscription)?; |
| 146 | fit_results = subscription.iter().skip(1).any(|&code| code == codec::FIT_EVENT); |
| 147 | } |
| 148 | Ok(Self { |
| 149 | link, |
| 150 | commands, |
| 151 | fit_results, |
| 152 | }) |
| 153 | } |
| 154 | |
| 155 | /// Read and decode one value, if the buds offer the command. A read the buds answer badly |
| 156 | /// (timeout, refusal, garbage) becomes a warning so the rest still shows; a lost link stops |
| 157 | /// everything. |
| 158 | fn read<T>( |
| 159 | &mut self, |
| 160 | reads: &mut Reads, |
| 161 | what: &str, |
| 162 | cmd: u16, |
| 163 | payload: &[u8], |
| 164 | decode: fn(&[u8]) -> Result<T>, |
| 165 | ) -> Result<Option<T>> { |
| 166 | if !self.commands.allows(cmd) { |
| 167 | return Ok(None); |
| 168 | } |
| 169 | match self.link.request(cmd, payload).and_then(|reply| decode(&reply)) { |
| 170 | Ok(value) => { |
| 171 | reads.answered += 1; |
| 172 | Ok(Some(value)) |
| 173 | } |
| 174 | Err(error) if error.kind() == Kind::Failed => { |
| 175 | reads.warnings.push(format!("{what}: {error}")); |
| 176 | Ok(None) |
| 177 | } |
| 178 | Err(error) => Err(error), |
| 179 | } |
| 180 | } |
| 181 | } |
| 182 | |
| 183 | impl T310Session { |
| 184 | /// After an acked write, read the setting back with `cmd query` until `check` reports the |
| 185 | /// new value, following `timing`. `check` returns whether the value is the one written, |
| 186 | /// and the value; `not_applied` describes a value that never changed. |
| 187 | /// Spec: realme_t310.md#write-read-back |
| 188 | fn read_back<T>( |
| 189 | &mut self, |
| 190 | timing: ReadBack, |
| 191 | cmd: u16, |
| 192 | query: &[u8], |
| 193 | check: impl Fn(&[u8]) -> Result<(bool, T)>, |
| 194 | not_applied: impl Fn(T) -> String, |
| 195 | ) -> Result<T> { |
| 196 | let acked = Instant::now(); |
| 197 | self.link.pump_until(acked + timing.first)?; |
| 198 | loop { |
| 199 | let (applied, value) = check(&self.link.request(cmd, query)?)?; |
| 200 | if applied { |
| 201 | return Ok(value); |
| 202 | } |
| 203 | if Instant::now() >= acked + timing.window { |
| 204 | return Err(Error::NotApplied(not_applied(value))); |
| 205 | } |
| 206 | self.link.pump_until(Instant::now() + READ_BACK_PAUSE)?; |
| 207 | } |
| 208 | } |
| 209 | } |
| 210 | |
| 211 | impl Session for T310Session { |
| 212 | fn status(&mut self) -> Result<Status> { |
| 213 | let mut reads = Reads::default(); |
| 214 | let switches = self.read( |
| 215 | &mut reads, |
| 216 | "switches", |
| 217 | codec::SWITCHES, |
| 218 | &codec::SWITCH_QUERY, |
| 219 | codec::decode_switches, |
| 220 | )?; |
| 221 | let noise_control = self.read( |
| 222 | &mut reads, |
| 223 | "noise control", |
| 224 | codec::NOISE_CONTROL, |
| 225 | &codec::NOISE_MODE_QUERY, |
| 226 | codec::decode_noise_mode, |
| 227 | )?; |
| 228 | let battery = self.read(&mut reads, "battery", codec::BATTERY, &[], codec::decode_battery)?; |
| 229 | let eq = self.read(&mut reads, "EQ", codec::EQ_PRESET, &[], codec::decode_eq)?; |
| 230 | // No bass-level read: the T310 does not answer an empty 0x0124 (HW1). It returns with W6. |
| 231 | // Spec: realme_t310.md#bass-read |
| 232 | let codec = self.read(&mut reads, "codec", codec::CODEC, &[], codec::decode_codec)?; |
| 233 | let firmware = self.read(&mut reads, "firmware", codec::FIRMWARE, &[], codec::decode_firmware)?; |
| 234 | |
| 235 | if reads.answered == 0 && !reads.warnings.is_empty() { |
| 236 | return Err(Error::Timeout(reads.warnings.join("; "))); |
| 237 | } |
| 238 | Ok(Status { |
| 239 | battery: battery.unwrap_or_default(), |
| 240 | noise_control, |
| 241 | eq, |
| 242 | bass_level: None, |
| 243 | switches: switches.unwrap_or_default(), |
| 244 | codec, |
| 245 | firmware, |
| 246 | warnings: reads.warnings, |
| 247 | }) |
| 248 | } |
| 249 | |
| 250 | /// Spec: realme_t310.md#anc-write, #write-read-back |
| 251 | fn set_noise_control(&mut self, mode: NoiseMode) -> Result<NoiseControl> { |
| 252 | if !self.commands.allows(codec::NOISE_CONTROL_WRITE) || !self.commands.allows(codec::NOISE_CONTROL) { |
| 253 | return Err(Error::Unsupported( |
| 254 | "these buds do not offer noise-control settings".to_owned(), |
| 255 | )); |
| 256 | } |
| 257 | let reply = self |
| 258 | .link |
| 259 | .request(codec::NOISE_CONTROL_WRITE, &codec::noise_write_payload(mode))?; |
| 260 | codec::check_write_reply(&reply, "the noise-control change")?; |
| 261 | |
| 262 | let wanted = codec::noise_write_mask(mode); |
| 263 | self.read_back( |
| 264 | READ_BACK, |
| 265 | codec::NOISE_CONTROL, |
| 266 | &codec::NOISE_MODE_QUERY, |
| 267 | |reply| { |
| 268 | Ok(( |
| 269 | codec::decode_noise_mask(reply)? == wanted, |
| 270 | codec::decode_noise_mode(reply)?, |
| 271 | )) |
| 272 | }, |
| 273 | |now| { |
| 274 | let wanted = match mode { |
| 275 | NoiseMode::Anc(level) => format!("anc ({})", level.name()), |
| 276 | _ => mode.name().to_owned(), |
| 277 | }; |
| 278 | let reported = match &now.level { |
| 279 | Some(level) => format!("{} ({level})", now.mode), |
| 280 | None => now.mode, |
| 281 | }; |
| 282 | format!("the buds accepted noise control {wanted}, but still report {reported}") |
| 283 | }, |
| 284 | ) |
| 285 | } |
| 286 | |
| 287 | /// Built-in presets only; custom EQs come with W11. Spec: realme_t310.md#eq-write |
| 288 | fn set_eq(&mut self, preset: &str) -> Result<String> { |
| 289 | let Some(id) = codec::eq_id(preset) else { |
| 290 | return Err(Error::Usage(format!( |
| 291 | "no EQ preset called {preset}; these buds have: {}", |
| 292 | codec::eq_names().join(", ") |
| 293 | ))); |
| 294 | }; |
| 295 | if !self.commands.allows(codec::EQ_SELECT) || !self.commands.allows(codec::EQ_PRESET) { |
| 296 | return Err(Error::Unsupported("these buds do not offer EQ presets".to_owned())); |
| 297 | } |
| 298 | let reply = self.link.request(codec::EQ_SELECT, &[id])?; |
| 299 | codec::check_write_reply(&reply, "the EQ change")?; |
| 300 | |
| 301 | self.read_back( |
| 302 | READ_BACK, |
| 303 | codec::EQ_PRESET, |
| 304 | &[], |
| 305 | |reply| { |
| 306 | let now = codec::decode_eq(reply)?; |
| 307 | Ok((now == preset, now)) |
| 308 | }, |
| 309 | |now| format!("the buds accepted EQ {preset}, but still report {now}"), |
| 310 | ) |
| 311 | } |
| 312 | |
| 313 | /// Spec: realme_t310.md#find |
| 314 | fn find(&mut self, ring: bool) -> Result<()> { |
| 315 | if !self.commands.allows(codec::FIND) { |
| 316 | return Err(Error::Unsupported("these buds cannot ring through budctl".to_owned())); |
| 317 | } |
| 318 | let reply = self.link.request(codec::FIND, &codec::find_payload(ring))?; |
| 319 | codec::check_write_reply(&reply, if ring { "ringing" } else { "stopping the ringing" }) |
| 320 | } |
| 321 | |
| 322 | /// Spec: realme_t310.md#switch-write, #write-read-back |
| 323 | fn set_switch(&mut self, key: &str, on: bool) -> Result<Switch> { |
| 324 | let Some(id) = codec::switch_id(key) else { |
| 325 | return Err(Error::Unsupported(format!("these buds have no switch called {key}"))); |
| 326 | }; |
| 327 | let Some(&(_, timing)) = WRITABLE_SWITCHES.iter().find(|(k, _)| *k == key) else { |
| 328 | return Err(Error::Unsupported(format!("changing {key} is not supported yet"))); |
| 329 | }; |
| 330 | if !self.commands.allows(codec::SWITCH_WRITE) || !self.commands.allows(codec::SWITCHES) { |
| 331 | return Err(Error::Unsupported("these buds do not offer switch settings".to_owned())); |
| 332 | } |
| 333 | let reply = self |
| 334 | .link |
| 335 | .request(codec::SWITCH_WRITE, &codec::switch_write_payload(id, on))?; |
| 336 | codec::check_write_reply(&reply, "the switch change")?; |
| 337 | |
| 338 | self.read_back( |
| 339 | timing, |
| 340 | codec::SWITCHES, |
| 341 | &codec::SWITCH_QUERY, |
| 342 | |reply| { |
| 343 | let switch = codec::decode_switches(reply)? |
| 344 | .into_iter() |
| 345 | .find(|s| s.key == key) |
| 346 | .ok_or_else(|| Error::Protocol(format!("the switch reply has no {key}")))?; |
| 347 | Ok((switch.on == on, switch)) |
| 348 | }, |
| 349 | |now| { |
| 350 | format!( |
| 351 | "the buds accepted {} {}, but still report {}", |
| 352 | now.label, |
| 353 | on_off(on), |
| 354 | on_off(now.on) |
| 355 | ) |
| 356 | }, |
| 357 | ) |
| 358 | } |
| 359 | |
| 360 | fn touch_controls(&mut self) -> Result<TouchControls> { |
| 361 | if !self.commands.allows(codec::GESTURES) { |
| 362 | return Err(Error::Unsupported( |
| 363 | "these buds do not offer touch-control settings".to_owned(), |
| 364 | )); |
| 365 | } |
| 366 | let gestures = codec::decode_gestures(&self.link.request(codec::GESTURES, &[])?)?; |
| 367 | let mut reads = Reads::default(); |
| 368 | let hold_cycle = self.read( |
| 369 | &mut reads, |
| 370 | "hold cycle", |
| 371 | codec::NOISE_CONTROL, |
| 372 | &codec::HOLD_CYCLE_QUERY, |
| 373 | codec::decode_hold_cycle, |
| 374 | )?; |
| 375 | Ok(TouchControls { |
| 376 | gestures, |
| 377 | hold_cycle, |
| 378 | warnings: reads.warnings, |
| 379 | }) |
| 380 | } |
| 381 | |
| 382 | /// Spec: realme_t310.md#fit-test |
| 383 | fn fit_test(&mut self) -> Result<Vec<BudFit>> { |
| 384 | if !self.commands.allows(codec::FIT_TEST) || !self.fit_results { |
| 385 | return Err(Error::Unsupported("these buds do not offer a fit test".to_owned())); |
| 386 | } |
| 387 | let reply = self.link.request(codec::FIT_TEST, &codec::fit_test_payload(true))?; |
| 388 | codec::check_write_reply(&reply, "starting the fit test")?; |
| 389 | |
| 390 | let deadline = Instant::now() + FIT_TEST_WAIT; |
| 391 | let result = self.link.wait_for(deadline, |frame| { |
| 392 | codec::is_fit_push(frame.cmd, &frame.payload).then(|| codec::decode_fit_push(&frame.payload)) |
| 393 | })?; |
| 394 | match result { |
| 395 | Some(buds) => buds, |
| 396 | None => { |
| 397 | // Do not leave the test running. Spec: realme_t310.md#fit-test |
| 398 | let stopped = match self.stop_fit_test() { |
| 399 | Ok(()) => "budctl stopped the test".to_owned(), |
| 400 | Err(error) => format!("stopping it failed too: {error}"), |
| 401 | }; |
| 402 | Err(Error::Timeout(format!( |
| 403 | "no fit-test result within {} s; {stopped}", |
| 404 | FIT_TEST_WAIT.as_secs() |
| 405 | ))) |
| 406 | } |
| 407 | } |
| 408 | } |
| 409 | |
| 410 | /// Spec: realme_t310.md#fit-test |
| 411 | fn stop_fit_test(&mut self) -> Result<()> { |
| 412 | if !self.commands.allows(codec::FIT_TEST) { |
| 413 | return Err(Error::Unsupported("these buds do not offer a fit test".to_owned())); |
| 414 | } |
| 415 | let reply = self.link.request(codec::FIT_TEST, &codec::fit_test_payload(false))?; |
| 416 | codec::check_write_reply(&reply, "stopping the fit test") |
| 417 | } |
| 418 | |
| 419 | /// Spec: realme_t310.md#hold-cycle-write, #write-read-back |
| 420 | fn set_hold_cycle(&mut self, modes: &[&str]) -> Result<Vec<String>> { |
| 421 | let mask = codec::hold_cycle_mask(modes)?; |
| 422 | if !self.commands.allows(codec::NOISE_CONTROL_WRITE) || !self.commands.allows(codec::NOISE_CONTROL) { |
| 423 | return Err(Error::Unsupported( |
| 424 | "these buds do not offer noise-control settings".to_owned(), |
| 425 | )); |
| 426 | } |
| 427 | let reply = self |
| 428 | .link |
| 429 | .request(codec::NOISE_CONTROL_WRITE, &codec::hold_cycle_write_payload(mask))?; |
| 430 | codec::check_write_reply(&reply, "the hold-cycle change")?; |
| 431 | |
| 432 | self.read_back( |
| 433 | READ_BACK, |
| 434 | codec::NOISE_CONTROL, |
| 435 | &codec::HOLD_CYCLE_QUERY, |
| 436 | |reply| { |
| 437 | Ok(( |
| 438 | codec::decode_hold_cycle_mask(reply)? == mask, |
| 439 | codec::decode_hold_cycle(reply)?, |
| 440 | )) |
| 441 | }, |
| 442 | |now| { |
| 443 | format!( |
| 444 | "the buds accepted the hold cycle {}, but still report {}", |
| 445 | modes.join(" → "), |
| 446 | now.join(" → ") |
| 447 | ) |
| 448 | }, |
| 449 | ) |
| 450 | } |
| 451 | |
| 452 | /// Spec: realme_t310.md#gesture-write, #gesture-choices |
| 453 | fn set_touch(&mut self, side: &str, gesture: &str, action: &str, dry_run: bool) -> Result<TouchChange> { |
| 454 | let target = codec::touch_target(side, gesture, action)?; |
| 455 | if !self.commands.allows(codec::GESTURE_WRITE) || !self.commands.allows(codec::GESTURES) { |
| 456 | return Err(Error::Unsupported( |
| 457 | "these buds do not offer touch-control settings".to_owned(), |
| 458 | )); |
| 459 | } |
| 460 | // The write carries the whole table, so it starts from the table read just now. |
| 461 | let before = codec::decode_gesture_entries(&self.link.request(codec::GESTURES, &[])?)?; |
| 462 | let after = codec::retarget_gestures(&before, &target)?; |
| 463 | let changes: Vec<GestureChange> = before |
| 464 | .iter() |
| 465 | .zip(&after) |
| 466 | .filter(|(old, new)| old != new) |
| 467 | .map(|(old, new)| { |
| 468 | let (old, new) = (codec::name_gesture(old), codec::name_gesture(new)); |
| 469 | GestureChange { |
| 470 | side: new.side, |
| 471 | gesture: new.gesture, |
| 472 | from: old.action, |
| 473 | to: new.action, |
| 474 | } |
| 475 | }) |
| 476 | .collect(); |
| 477 | let planned: Vec<_> = after.iter().map(codec::name_gesture).collect(); |
| 478 | if changes.is_empty() { |
| 479 | return Ok(TouchChange { |
| 480 | changes, |
| 481 | write: None, |
| 482 | sent: false, |
| 483 | gestures: planned, |
| 484 | }); |
| 485 | } |
| 486 | let write = RawWrite { |
| 487 | command: codec::GESTURE_WRITE, |
| 488 | payload: codec::gesture_write_payload(&after)?, |
| 489 | }; |
| 490 | if dry_run { |
| 491 | return Ok(TouchChange { |
| 492 | changes, |
| 493 | write: Some(write), |
| 494 | sent: false, |
| 495 | gestures: planned, |
| 496 | }); |
| 497 | } |
| 498 | |
| 499 | let reply = self.link.request(write.command, &write.payload)?; |
| 500 | codec::check_write_reply(&reply, "the touch-control change")?; |
| 501 | let gestures = self.read_back( |
| 502 | TOUCH_READ_BACK, |
| 503 | codec::GESTURES, |
| 504 | &[], |
| 505 | |reply| { |
| 506 | let now = codec::decode_gesture_entries(reply)?; |
| 507 | // Applied when retargeting the table read back would change nothing. |
| 508 | let applied = codec::retarget_gestures(&now, &target).is_ok_and(|again| again == now); |
| 509 | Ok((applied, now)) |
| 510 | }, |
| 511 | |now| { |
| 512 | let still: Vec<String> = changes |
| 513 | .iter() |
| 514 | .filter_map(|change| { |
| 515 | now.iter() |
| 516 | .map(codec::name_gesture) |
| 517 | .find(|g| g.group.is_none() && g.side == change.side && g.gesture == change.gesture) |
| 518 | }) |
| 519 | .filter(|g| g.action != action) |
| 520 | .map(|g| format!("{} {} {}", g.side, g.gesture, g.action)) |
| 521 | .collect(); |
| 522 | if still.is_empty() { |
| 523 | format!("the buds accepted {side} {gesture} {action}, but the table read back does not show it") |
| 524 | } else { |
| 525 | format!( |
| 526 | "the buds accepted {side} {gesture} {action}, but still report {}", |
| 527 | still.join(", ") |
| 528 | ) |
| 529 | } |
| 530 | }, |
| 531 | )?; |
| 532 | Ok(TouchChange { |
| 533 | changes, |
| 534 | write: Some(write), |
| 535 | sent: true, |
| 536 | gestures: gestures.iter().map(codec::name_gesture).collect(), |
| 537 | }) |
| 538 | } |
| 539 | } |
| 540 | |
| 541 | #[cfg(test)] |
| 542 | mod tests { |
| 543 | use super::*; |
| 544 | use crate::status::{AncLevel, Charge}; |
| 545 | use crate::transport::mock::{Script, Step, hex}; |
| 546 | |
| 547 | fn tx(cmd: u16, seq: u8, payload: &str) -> Step { |
| 548 | Step::Tx(frame::encode(cmd, seq, &hex(payload)).unwrap()) |
| 549 | } |
| 550 | |
| 551 | fn rx(cmd: u16, seq: u8, payload: &str) -> Step { |
| 552 | Step::Rx(frame::encode(cmd, seq, &hex(payload)).unwrap()) |
| 553 | } |
| 554 | |
| 555 | fn fixed_clock() -> u32 { |
| 556 | 1_750_000_000 |
| 557 | } |
| 558 | |
| 559 | fn open(script: &Script) -> Result<T310Session> { |
| 560 | T310Session::open(Link::new(script.transport(), fixed_clock)) |
| 561 | } |
| 562 | |
| 563 | /// The handshake of the owner's T310 (HW1); seq 01-04 are used up. |
| 564 | fn handshake() -> Vec<Step> { |
| 565 | vec![ |
| 566 | tx(0x0100, 0x01, ""), |
| 567 | rx(0x8100, 0x01, codec::T310_BITMAP_REPLY), |
| 568 | tx(0x0103, 0x02, ""), |
| 569 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 570 | tx(0x0200, 0x03, ""), |
| 571 | rx(0x8200, 0x03, "00 09 01 02 03 04 05 06 0D F1 F4"), |
| 572 | tx(0x0205, 0x04, "04 01 02 03 04"), |
| 573 | rx(0x8205, 0x04, "00 04 01 00 02 00 03 00 04 00"), |
| 574 | ] |
| 575 | } |
| 576 | |
| 577 | #[test] |
| 578 | fn full_status() { |
| 579 | let mut steps = handshake(); |
| 580 | let mut firmware = String::from("00 03"); |
| 581 | for byte in b"1,2,120,2,2,120,3,2,105" { |
| 582 | firmware.push_str(&format!(" {byte:02X}")); |
| 583 | } |
| 584 | steps.extend([ |
| 585 | tx(0x010D, 0x05, "06 05 06 11 1A 1B 1D"), |
| 586 | rx(0x810D, 0x05, "00 06 05 00 06 00 11 01 1A 00 1B 01 1D 01"), |
| 587 | tx(0x010C, 0x06, "01 01"), |
| 588 | rx(0x810C, 0x06, "00 01 01 08"), |
| 589 | tx(0x0106, 0x07, ""), |
| 590 | rx(0x8106, 0x07, "00 03 01 50 02 E4 03 3C"), |
| 591 | tx(0x010F, 0x08, ""), |
| 592 | rx(0x810F, 0x08, "00 01"), |
| 593 | tx(0x0114, 0x09, ""), |
| 594 | rx(0x8114, 0x09, "00 02"), |
| 595 | tx(0x0105, 0x0A, ""), |
| 596 | rx(0x8105, 0x0A, &firmware), |
| 597 | ]); |
| 598 | let script = Script::new(steps); |
| 599 | let status = open(&script).unwrap().status().unwrap(); |
| 600 | script.assert_done(); |
| 601 | |
| 602 | assert_eq!( |
| 603 | status.battery.left, |
| 604 | Some(Charge { |
| 605 | level: 80, |
| 606 | charging: false |
| 607 | }) |
| 608 | ); |
| 609 | assert_eq!( |
| 610 | status.battery.right, |
| 611 | Some(Charge { |
| 612 | level: 100, |
| 613 | charging: true |
| 614 | }) |
| 615 | ); |
| 616 | assert_eq!( |
| 617 | status.battery.case, |
| 618 | Some(Charge { |
| 619 | level: 60, |
| 620 | charging: false |
| 621 | }) |
| 622 | ); |
| 623 | let noise = status.noise_control.unwrap(); |
| 624 | assert_eq!((noise.mode.as_str(), noise.level.as_deref()), ("anc", Some("deep"))); |
| 625 | assert_eq!(status.eq.as_deref(), Some("deep-bass")); |
| 626 | assert_eq!(status.bass_level, None); |
| 627 | assert_eq!(status.codec.as_deref(), Some("AAC")); |
| 628 | assert_eq!(status.firmware.as_deref(), Some("120.120.105")); |
| 629 | let game = status.switches.iter().find(|s| s.key == "game").unwrap(); |
| 630 | assert!(!game.on); |
| 631 | assert_eq!(status.switches.len(), 5); |
| 632 | assert!(status.warnings.is_empty()); |
| 633 | } |
| 634 | |
| 635 | #[test] |
| 636 | fn answers_the_time_request_during_the_settle() { |
| 637 | let mut steps = vec![ |
| 638 | rx(0x0500, 0x01, ""), |
| 639 | Step::Tx(hex("AA 0C 00 00 00 85 01 05 00 00 80 E1 4E 68")), |
| 640 | ]; |
| 641 | steps.extend(handshake()); |
| 642 | // No 0x8205 ack this time: it may never arrive, and `open` does not wait for it. |
| 643 | // Spec: realme_t310.md#subscribe |
| 644 | steps.pop(); |
| 645 | let script = Script::new(steps); |
| 646 | open(&script).unwrap(); |
| 647 | script.assert_done(); |
| 648 | } |
| 649 | |
| 650 | #[test] |
| 651 | fn a_silent_handshake_reports_a_busy_channel() { |
| 652 | let script = Script::new(vec![tx(0x0100, 0x01, "")]); |
| 653 | assert!(matches!(open(&script), Err(Error::ChannelBusy(_)))); |
| 654 | } |
| 655 | |
| 656 | #[test] |
| 657 | fn other_models_are_refused() { |
| 658 | let script = Script::new(vec![ |
| 659 | tx(0x0100, 0x01, ""), |
| 660 | rx(0x8100, 0x01, codec::T310_BITMAP_REPLY), |
| 661 | tx(0x0103, 0x02, ""), |
| 662 | rx(0x8103, 0x02, "00 14 54 06"), |
| 663 | ]); |
| 664 | match open(&script) { |
| 665 | Err(Error::WrongModel { found, .. }) => assert_eq!(found, "065414"), |
| 666 | other => panic!("expected WrongModel, got {:?}", other.err()), |
| 667 | } |
| 668 | } |
| 669 | |
| 670 | #[test] |
| 671 | fn commands_missing_from_the_bitmap_are_never_sent() { |
| 672 | // A bitmap with no bits: only always-allowed commands go out, and no subscription. |
| 673 | let script = Script::new(vec![ |
| 674 | tx(0x0100, 0x01, ""), |
| 675 | rx(0x8100, 0x01, "00"), |
| 676 | tx(0x0103, 0x02, ""), |
| 677 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 678 | tx(0x0200, 0x03, ""), |
| 679 | rx(0x8200, 0x03, "00 02 01 02"), |
| 680 | tx(0x010D, 0x04, "06 05 06 11 1A 1B 1D"), |
| 681 | rx(0x810D, 0x04, "00 01 06 01"), |
| 682 | tx(0x0106, 0x05, ""), |
| 683 | // no battery reply: becomes a warning |
| 684 | ]); |
| 685 | let status = open(&script).unwrap().status().unwrap(); |
| 686 | script.assert_done(); |
| 687 | assert_eq!(status.switches.len(), 1); |
| 688 | assert!(status.noise_control.is_none() && status.firmware.is_none()); |
| 689 | assert_eq!(status.warnings.len(), 1); |
| 690 | assert!(status.warnings.first().unwrap().starts_with("battery")); |
| 691 | } |
| 692 | |
| 693 | #[test] |
| 694 | fn a_lost_link_stops_the_status() { |
| 695 | let mut steps = handshake(); |
| 696 | steps.extend([tx(0x010D, 0x05, "06 05 06 11 1A 1B 1D"), Step::Close]); |
| 697 | let script = Script::new(steps); |
| 698 | assert!(matches!(open(&script).unwrap().status(), Err(Error::NotConnected(_)))); |
| 699 | } |
| 700 | |
| 701 | #[test] |
| 702 | fn touch_controls_and_hold_cycle() { |
| 703 | let mut steps = handshake(); |
| 704 | steps.extend([ |
| 705 | tx(0x0108, 0x05, ""), |
| 706 | rx(0x8108, 0x05, "00 02 01 01 02 01 02 01 04 08"), |
| 707 | tx(0x010C, 0x06, "02 01"), |
| 708 | rx(0x810C, 0x06, "00 02 01 0A"), |
| 709 | ]); |
| 710 | let script = Script::new(steps); |
| 711 | let touch = open(&script).unwrap().touch_controls().unwrap(); |
| 712 | script.assert_done(); |
| 713 | assert_eq!(touch.gestures.len(), 2); |
| 714 | assert_eq!(touch.hold_cycle.unwrap(), ["transparency", "anc"]); |
| 715 | } |
| 716 | |
| 717 | /// The owner's `budctl --debug touch` (HW1), byte for byte. The buds' own frames (slice |
| 718 | /// byte 08) arrive glued to replies and need no answer. |
| 719 | #[test] |
| 720 | fn replays_the_hw1_touch_session() { |
| 721 | let script = Script::new(vec![ |
| 722 | Step::Tx(hex("AA 07 00 00 00 01 01 00 00")), |
| 723 | Step::Rx(hex( |
| 724 | "AA 10 00 00 00 81 01 09 00 00 BF 1F 5A 20 45 04 40 00 AA 07 08 00 01 05 0F 00 00", |
| 725 | )), |
| 726 | Step::Tx(hex("AA 07 00 00 03 01 02 00 00")), |
| 727 | Step::Rx(hex("AA 0B 00 00 03 81 02 04 00 00 12 3C 06")), |
| 728 | Step::Tx(hex("AA 07 00 00 00 02 03 00 00")), |
| 729 | Step::Rx(hex("AA 12 00 00 00 82 03 0B 00 00 09 01 02 03 04 05 06 0D F1 F4")), |
| 730 | Step::Tx(hex("AA 0C 00 00 05 02 04 05 00 04 01 02 03 04")), |
| 731 | Step::Rx(hex( |
| 732 | "AA 11 00 00 05 82 04 0A 00 00 04 01 00 02 00 03 00 04 00 AA 0F 08 00 04 02 10 08 00 01 03 02 64 01 64 03 00", |
| 733 | )), |
| 734 | Step::Tx(hex("AA 07 00 00 08 01 05 00 00")), |
| 735 | Step::Rx(hex( |
| 736 | "AA 21 00 00 08 81 05 1A 00 00 06 01 01 02 01 01 01 03 06 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08", |
| 737 | )), |
| 738 | Step::Tx(hex("AA 09 00 00 0C 01 06 02 00 02 01")), |
| 739 | Step::Rx(hex("AA 0B 00 00 0C 81 06 04 00 00 02 01 0A")), |
| 740 | ]); |
| 741 | let touch = open(&script).unwrap().touch_controls().unwrap(); |
| 742 | script.assert_done(); |
| 743 | let table: Vec<(&str, &str, &str)> = touch |
| 744 | .gestures |
| 745 | .iter() |
| 746 | .map(|g| (g.side.as_str(), g.gesture.as_str(), g.action.as_str())) |
| 747 | .collect(); |
| 748 | assert_eq!( |
| 749 | table, |
| 750 | [ |
| 751 | ("left", "double-tap", "play-pause"), |
| 752 | ("left", "triple-tap", "next"), |
| 753 | ("left", "hold", "noise-cycle"), |
| 754 | ("right", "double-tap", "play-pause"), |
| 755 | ("right", "triple-tap", "next"), |
| 756 | ("right", "hold", "noise-cycle"), |
| 757 | ] |
| 758 | ); |
| 759 | assert_eq!(touch.hold_cycle.unwrap(), ["transparency", "anc"]); |
| 760 | assert!(touch.warnings.is_empty()); |
| 761 | } |
| 762 | |
| 763 | #[test] |
| 764 | fn sets_noise_control_and_reads_it_back() { |
| 765 | let mut steps = handshake(); |
| 766 | steps.extend([ |
| 767 | tx(0x0404, 0x05, "01 01 02"), |
| 768 | rx(0x8404, 0x05, "00"), |
| 769 | // The buds announce the change; it needs no answer. |
| 770 | rx(0x0204, 0x10, "03 01 01 02"), |
| 771 | tx(0x010C, 0x06, "01 01"), |
| 772 | rx(0x810C, 0x06, "00 01 01 02"), |
| 773 | ]); |
| 774 | let script = Script::new(steps); |
| 775 | let now = open(&script) |
| 776 | .unwrap() |
| 777 | .set_noise_control(NoiseMode::Transparency) |
| 778 | .unwrap(); |
| 779 | script.assert_done(); |
| 780 | assert_eq!((now.mode.as_str(), now.level), ("transparency", None)); |
| 781 | } |
| 782 | |
| 783 | #[test] |
| 784 | fn reads_back_again_until_the_change_shows() { |
| 785 | let mut steps = handshake(); |
| 786 | steps.extend([ |
| 787 | tx(0x0404, 0x05, "01 01 01"), |
| 788 | rx(0x8404, 0x05, "00"), |
| 789 | tx(0x010C, 0x06, "01 01"), |
| 790 | rx(0x810C, 0x06, "00 01 01 08"), |
| 791 | tx(0x010C, 0x07, "01 01"), |
| 792 | rx(0x810C, 0x07, "00 01 01 01"), |
| 793 | ]); |
| 794 | let script = Script::new(steps); |
| 795 | let now = open(&script).unwrap().set_noise_control(NoiseMode::Off).unwrap(); |
| 796 | script.assert_done(); |
| 797 | assert_eq!(now.mode, "off"); |
| 798 | } |
| 799 | |
| 800 | #[test] |
| 801 | fn sets_a_noise_cancelling_level() { |
| 802 | let mut steps = handshake(); |
| 803 | steps.extend([ |
| 804 | tx(0x0404, 0x05, "01 01 04"), |
| 805 | rx(0x8404, 0x05, "00"), |
| 806 | tx(0x010C, 0x06, "01 01"), |
| 807 | rx(0x810C, 0x06, "00 01 01 04"), |
| 808 | ]); |
| 809 | let script = Script::new(steps); |
| 810 | let now = open(&script) |
| 811 | .unwrap() |
| 812 | .set_noise_control(NoiseMode::Anc(AncLevel::Light)) |
| 813 | .unwrap(); |
| 814 | script.assert_done(); |
| 815 | assert_eq!((now.mode.as_str(), now.level.as_deref()), ("anc", Some("light"))); |
| 816 | } |
| 817 | |
| 818 | #[test] |
| 819 | fn a_rejected_noise_control_change_is_not_read_back() { |
| 820 | let mut steps = handshake(); |
| 821 | steps.extend([tx(0x0404, 0x05, "01 01 08"), rx(0x8404, 0x05, "0E")]); |
| 822 | let script = Script::new(steps); |
| 823 | let result = open(&script).unwrap().set_noise_control(NoiseMode::Anc(AncLevel::Deep)); |
| 824 | script.assert_done(); |
| 825 | assert!(matches!(result, Err(Error::Rejected { status: 0x0E, .. }))); |
| 826 | } |
| 827 | |
| 828 | #[test] |
| 829 | fn noise_control_is_not_written_without_its_bitmap_bit() { |
| 830 | let script = Script::new(vec![ |
| 831 | tx(0x0100, 0x01, ""), |
| 832 | rx(0x8100, 0x01, "00"), |
| 833 | tx(0x0103, 0x02, ""), |
| 834 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 835 | tx(0x0200, 0x03, ""), |
| 836 | rx(0x8200, 0x03, "00 00"), |
| 837 | ]); |
| 838 | let result = open(&script).unwrap().set_noise_control(NoiseMode::Off); |
| 839 | script.assert_done(); |
| 840 | assert!(matches!(result, Err(Error::Unsupported(_)))); |
| 841 | } |
| 842 | |
| 843 | #[test] |
| 844 | fn sets_game_mode_and_reads_it_back() { |
| 845 | let mut steps = handshake(); |
| 846 | steps.extend([ |
| 847 | tx(0x0403, 0x05, "06 01"), |
| 848 | rx(0x8403, 0x05, "00"), |
| 849 | // Still the old value: budctl reads again. |
| 850 | tx(0x010D, 0x06, "06 05 06 11 1A 1B 1D"), |
| 851 | rx(0x810D, 0x06, "00 06 05 00 06 00 11 00 1A 01 1B 00 1D 00"), |
| 852 | tx(0x010D, 0x07, "06 05 06 11 1A 1B 1D"), |
| 853 | rx(0x810D, 0x07, "00 06 05 00 06 01 11 00 1A 01 1B 00 1D 00"), |
| 854 | ]); |
| 855 | let script = Script::new(steps); |
| 856 | let game = open(&script).unwrap().set_switch("game", true).unwrap(); |
| 857 | script.assert_done(); |
| 858 | assert_eq!((game.key, game.on), ("game", true)); |
| 859 | } |
| 860 | |
| 861 | #[test] |
| 862 | fn unknown_switches_are_never_written() { |
| 863 | // Nothing is sent after the handshake, so the subscribe ack is left out. |
| 864 | let mut steps = handshake(); |
| 865 | steps.pop(); |
| 866 | let script = Script::new(steps); |
| 867 | let mut session = open(&script).unwrap(); |
| 868 | assert!(matches!(session.set_switch("turbo", true), Err(Error::Unsupported(_)))); |
| 869 | script.assert_done(); |
| 870 | } |
| 871 | |
| 872 | #[test] |
| 873 | fn sets_bass_boost_and_reads_it_back_at_once() { |
| 874 | let mut steps = handshake(); |
| 875 | steps.extend([ |
| 876 | tx(0x0403, 0x05, "1D 01"), |
| 877 | rx(0x8403, 0x05, "00"), |
| 878 | tx(0x010D, 0x06, "06 05 06 11 1A 1B 1D"), |
| 879 | rx(0x810D, 0x06, "00 06 05 00 06 00 11 00 1A 01 1B 00 1D 01"), |
| 880 | ]); |
| 881 | let script = Script::new(steps); |
| 882 | let now = open(&script).unwrap().set_switch("bass-boost", true).unwrap(); |
| 883 | script.assert_done(); |
| 884 | assert_eq!((now.key, now.on), ("bass-boost", true)); |
| 885 | } |
| 886 | |
| 887 | #[test] |
| 888 | fn a_switch_the_buds_lack_is_rejected() { |
| 889 | let mut steps = handshake(); |
| 890 | steps.extend([tx(0x0403, 0x05, "06 00"), rx(0x8403, 0x05, "01")]); |
| 891 | let script = Script::new(steps); |
| 892 | let result = open(&script).unwrap().set_switch("game", false); |
| 893 | script.assert_done(); |
| 894 | assert!(matches!(result, Err(Error::Rejected { status: 0x01, .. }))); |
| 895 | } |
| 896 | |
| 897 | #[test] |
| 898 | fn selects_an_eq_preset_and_reads_it_back() { |
| 899 | let mut steps = handshake(); |
| 900 | steps.extend([ |
| 901 | tx(0x0406, 0x05, "01"), |
| 902 | rx(0x8406, 0x05, "00"), |
| 903 | tx(0x010F, 0x06, ""), |
| 904 | rx(0x810F, 0x06, "00 01"), |
| 905 | ]); |
| 906 | let script = Script::new(steps); |
| 907 | let now = open(&script).unwrap().set_eq("deep-bass").unwrap(); |
| 908 | script.assert_done(); |
| 909 | assert_eq!(now, "deep-bass"); |
| 910 | } |
| 911 | |
| 912 | #[test] |
| 913 | fn an_unknown_eq_preset_is_a_usage_error() { |
| 914 | let mut steps = handshake(); |
| 915 | steps.pop(); |
| 916 | let script = Script::new(steps); |
| 917 | let result = open(&script).unwrap().set_eq("loudness"); |
| 918 | script.assert_done(); |
| 919 | match result { |
| 920 | Err(Error::Usage(message)) => assert!(message.contains("pure-raw, deep-bass, pure-vocals, pure-bass")), |
| 921 | other => panic!("expected a usage error, got {other:?}"), |
| 922 | } |
| 923 | } |
| 924 | |
| 925 | #[test] |
| 926 | fn rings_and_stops() { |
| 927 | let mut steps = handshake(); |
| 928 | steps.extend([ |
| 929 | tx(0x0400, 0x05, "01"), |
| 930 | rx(0x8400, 0x05, "00"), |
| 931 | tx(0x0400, 0x06, "00"), |
| 932 | rx(0x8400, 0x06, "00"), |
| 933 | ]); |
| 934 | let script = Script::new(steps); |
| 935 | let mut session = open(&script).unwrap(); |
| 936 | session.find(true).unwrap(); |
| 937 | session.find(false).unwrap(); |
| 938 | script.assert_done(); |
| 939 | } |
| 940 | |
| 941 | #[test] |
| 942 | fn find_is_not_sent_without_its_bitmap_bit() { |
| 943 | // Bits 0-4 only: no bit 5. |
| 944 | let script = Script::new(vec![ |
| 945 | tx(0x0100, 0x01, ""), |
| 946 | rx(0x8100, 0x01, "00 1F"), |
| 947 | tx(0x0103, 0x02, ""), |
| 948 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 949 | tx(0x0200, 0x03, ""), |
| 950 | rx(0x8200, 0x03, "00 00"), |
| 951 | ]); |
| 952 | let result = open(&script).unwrap().find(true); |
| 953 | script.assert_done(); |
| 954 | assert!(matches!(result, Err(Error::Unsupported(_)))); |
| 955 | } |
| 956 | |
| 957 | /// The owner's gesture table (HW1) and the same table with the left triple tap on volume up. |
| 958 | const HW1_TABLE: &str = "00 06 01 01 02 01 01 01 03 06 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08"; |
| 959 | const LEFT_VOLUME_UP: &str = "06 01 01 02 01 01 01 03 0B 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08"; |
| 960 | |
| 961 | #[test] |
| 962 | fn a_touch_dry_run_reads_the_table_and_sends_nothing() { |
| 963 | let mut steps = handshake(); |
| 964 | steps.extend([tx(0x0108, 0x05, ""), rx(0x8108, 0x05, HW1_TABLE)]); |
| 965 | let script = Script::new(steps); |
| 966 | let change = open(&script) |
| 967 | .unwrap() |
| 968 | .set_touch("left", "triple-tap", "volume-up", true) |
| 969 | .unwrap(); |
| 970 | script.assert_done(); |
| 971 | assert!(!change.sent); |
| 972 | let write = change.write.unwrap(); |
| 973 | assert_eq!((write.command, write.payload), (0x0401, hex(LEFT_VOLUME_UP))); |
| 974 | assert_eq!( |
| 975 | change.changes, |
| 976 | [GestureChange { |
| 977 | side: "left".to_owned(), |
| 978 | gesture: "triple-tap".to_owned(), |
| 979 | from: "next".to_owned(), |
| 980 | to: "volume-up".to_owned(), |
| 981 | }] |
| 982 | ); |
| 983 | let left_triple = change.gestures.get(1).unwrap(); |
| 984 | assert_eq!(left_triple.action, "volume-up"); |
| 985 | } |
| 986 | |
| 987 | #[test] |
| 988 | fn sets_a_gesture_and_reads_the_table_back() { |
| 989 | let mut steps = handshake(); |
| 990 | steps.extend([ |
| 991 | tx(0x0108, 0x05, ""), |
| 992 | rx(0x8108, 0x05, HW1_TABLE), |
| 993 | tx(0x0401, 0x06, LEFT_VOLUME_UP), |
| 994 | // The owner's ack (W8): 00, then the old table cut to the write's length. |
| 995 | rx( |
| 996 | 0x8401, |
| 997 | 0x06, |
| 998 | "00 06 01 01 02 01 01 01 03 06 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04", |
| 999 | ), |
| 1000 | tx(0x0108, 0x07, ""), |
| 1001 | rx(0x8108, 0x07, &format!("00 {LEFT_VOLUME_UP}")), |
| 1002 | ]); |
| 1003 | let script = Script::new(steps); |
| 1004 | let change = open(&script) |
| 1005 | .unwrap() |
| 1006 | .set_touch("left", "triple-tap", "volume-up", false) |
| 1007 | .unwrap(); |
| 1008 | script.assert_done(); |
| 1009 | assert!(change.sent); |
| 1010 | assert_eq!(change.changes.len(), 1); |
| 1011 | assert_eq!(change.gestures.get(1).unwrap().action, "volume-up"); |
| 1012 | } |
| 1013 | |
| 1014 | #[test] |
| 1015 | fn a_gesture_that_already_has_the_action_is_not_written() { |
| 1016 | let mut steps = handshake(); |
| 1017 | steps.extend([tx(0x0108, 0x05, ""), rx(0x8108, 0x05, HW1_TABLE)]); |
| 1018 | let script = Script::new(steps); |
| 1019 | let change = open(&script) |
| 1020 | .unwrap() |
| 1021 | .set_touch("both", "hold", "noise-cycle", false) |
| 1022 | .unwrap(); |
| 1023 | script.assert_done(); |
| 1024 | assert!(change.changes.is_empty() && change.write.is_none() && !change.sent); |
| 1025 | } |
| 1026 | |
| 1027 | #[test] |
| 1028 | fn a_bad_touch_action_is_refused_before_anything_is_sent() { |
| 1029 | let mut steps = handshake(); |
| 1030 | steps.pop(); |
| 1031 | let script = Script::new(steps); |
| 1032 | let result = open(&script) |
| 1033 | .unwrap() |
| 1034 | .set_touch("left", "double-tap", "volume-up", false); |
| 1035 | script.assert_done(); |
| 1036 | assert!(matches!(result, Err(Error::Usage(_)))); |
| 1037 | } |
| 1038 | |
| 1039 | #[test] |
| 1040 | fn sets_the_hold_cycle_and_reads_it_back() { |
| 1041 | let mut steps = handshake(); |
| 1042 | steps.extend([ |
| 1043 | tx(0x0404, 0x05, "02 01 0B"), |
| 1044 | rx(0x8404, 0x05, "00"), |
| 1045 | tx(0x010C, 0x06, "02 01"), |
| 1046 | rx(0x810C, 0x06, "00 02 01 0B"), |
| 1047 | ]); |
| 1048 | let script = Script::new(steps); |
| 1049 | let now = open(&script) |
| 1050 | .unwrap() |
| 1051 | .set_hold_cycle(&["off", "transparency", "anc"]) |
| 1052 | .unwrap(); |
| 1053 | script.assert_done(); |
| 1054 | assert_eq!(now, ["off", "transparency", "anc"]); |
| 1055 | } |
| 1056 | |
| 1057 | #[test] |
| 1058 | fn a_one_mode_hold_cycle_is_refused_before_anything_is_sent() { |
| 1059 | let mut steps = handshake(); |
| 1060 | steps.pop(); |
| 1061 | let script = Script::new(steps); |
| 1062 | let result = open(&script).unwrap().set_hold_cycle(&["anc"]); |
| 1063 | script.assert_done(); |
| 1064 | assert!(matches!(result, Err(Error::Usage(_)))); |
| 1065 | } |
| 1066 | |
| 1067 | #[test] |
| 1068 | fn runs_a_fit_test_and_waits_for_the_result() { |
| 1069 | let mut steps = handshake(); |
| 1070 | steps.extend([ |
| 1071 | tx(0x0405, 0x05, "01"), |
| 1072 | rx(0x8405, 0x05, "00"), |
| 1073 | // Other pushes may come first; they are skipped. |
| 1074 | rx(0x0204, 0x20, "01 03 01 5A 02 5A 03 00"), |
| 1075 | rx(0x0204, 0x21, "04 01 01 02 00"), |
| 1076 | ]); |
| 1077 | let script = Script::new(steps); |
| 1078 | let buds = open(&script).unwrap().fit_test().unwrap(); |
| 1079 | script.assert_done(); |
| 1080 | let rows: Vec<(&str, &str)> = buds.iter().map(|b| (b.side.as_str(), b.fit.as_str())).collect(); |
| 1081 | assert_eq!(rows, [("left", "good"), ("right", "average")]); |
| 1082 | } |
| 1083 | |
| 1084 | #[test] |
| 1085 | fn a_fit_test_with_no_result_is_stopped() { |
| 1086 | let mut steps = handshake(); |
| 1087 | steps.extend([ |
| 1088 | tx(0x0405, 0x05, "01"), |
| 1089 | rx(0x8405, 0x05, "00"), |
| 1090 | // No result: the wait runs out, and budctl stops the test. |
| 1091 | tx(0x0405, 0x06, "00"), |
| 1092 | rx(0x8405, 0x06, "00"), |
| 1093 | ]); |
| 1094 | let script = Script::new(steps); |
| 1095 | let result = open(&script).unwrap().fit_test(); |
| 1096 | script.assert_done(); |
| 1097 | match result { |
| 1098 | Err(Error::Timeout(message)) => assert!(message.ends_with("budctl stopped the test")), |
| 1099 | other => panic!("expected a timeout, got {other:?}"), |
| 1100 | } |
| 1101 | } |
| 1102 | |
| 1103 | #[test] |
| 1104 | fn no_fit_test_without_the_result_subscription() { |
| 1105 | // The buds offer no event 04, so no result could ever arrive: nothing is sent. |
| 1106 | let script = Script::new(vec![ |
| 1107 | tx(0x0100, 0x01, ""), |
| 1108 | rx(0x8100, 0x01, codec::T310_BITMAP_REPLY), |
| 1109 | tx(0x0103, 0x02, ""), |
| 1110 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 1111 | tx(0x0200, 0x03, ""), |
| 1112 | rx(0x8200, 0x03, "00 03 01 02 03"), |
| 1113 | tx(0x0205, 0x04, "03 01 02 03"), |
| 1114 | ]); |
| 1115 | let result = open(&script).unwrap().fit_test(); |
| 1116 | script.assert_done(); |
| 1117 | assert!(matches!(result, Err(Error::Unsupported(_)))); |
| 1118 | } |
| 1119 | } |