| 1 | //! realme Buds T310. Spec: docs/protocol/realme_t310.md |
| 2 | //! |
| 3 | //! `frame.rs` and `link.rs` hold the protocol family's framing and request/reply logic; |
| 4 | //! `codec.rs` holds everything specific to the T310. |
| 5 | |
| 6 | use std::time::{Duration, Instant, SystemTime, UNIX_EPOCH}; |
| 7 | |
| 8 | use crate::bluez::PairedDevice; |
| 9 | use crate::bt::Uuid; |
| 10 | use crate::devices::{Device, Session}; |
| 11 | use crate::error::{Error, Kind, Result}; |
| 12 | use crate::status::{ |
| 13 | EqBand, EqPreset, EqPresets, GestureChange, NoiseControl, NoiseMode, RawWrite, Status, Switch, TouchChange, |
| 14 | TouchControls, |
| 15 | }; |
| 16 | use crate::transport::Transport; |
| 17 | |
| 18 | mod codec; |
| 19 | mod frame; |
| 20 | mod link; |
| 21 | |
| 22 | use codec::Commands; |
| 23 | use link::Link; |
| 24 | |
| 25 | /// When to read a setting back after the buds ack a write. Spec: realme_t310.md#write-read-back |
| 26 | #[derive(Clone, Copy)] |
| 27 | struct ReadBack { |
| 28 | /// How long after the ack the first read goes out. |
| 29 | first: Duration, |
| 30 | /// How long after the ack budctl gives up. |
| 31 | window: Duration, |
| 32 | } |
| 33 | |
| 34 | /// Spec: realme_t310.md#write-read-back |
| 35 | const READ_BACK: ReadBack = ReadBack { |
| 36 | first: Duration::ZERO, |
| 37 | window: Duration::from_secs(2), |
| 38 | }; |
| 39 | /// Game mode lands about 1 s after the ack. Spec: realme_t310.md#switch-write |
| 40 | const GAME_READ_BACK: ReadBack = ReadBack { |
| 41 | first: Duration::from_secs(1), |
| 42 | window: Duration::from_secs(3), |
| 43 | }; |
| 44 | /// The gesture table is read back about 600 ms after the ack. Spec: realme_t310.md#gesture-write |
| 45 | const TOUCH_READ_BACK: ReadBack = ReadBack { |
| 46 | first: Duration::from_millis(600), |
| 47 | window: Duration::from_secs(2), |
| 48 | }; |
| 49 | /// Spec: realme_t310.md#write-read-back |
| 50 | const READ_BACK_PAUSE: Duration = Duration::from_millis(300); |
| 51 | |
| 52 | /// The switches budctl may write, each added after the previous one passed its hardware |
| 53 | /// checkpoint (CLAUDE.md rule 4). Spec: realme_t310.md#switch-write |
| 54 | const WRITABLE_SWITCHES: [(&str, ReadBack); 5] = [ |
| 55 | ("game", GAME_READ_BACK), |
| 56 | ("bass-boost", READ_BACK), |
| 57 | ("spatial", READ_BACK), |
| 58 | ("wind", READ_BACK), |
| 59 | ("dual", READ_BACK), |
| 60 | ]; |
| 61 | |
| 62 | fn on_off(on: bool) -> &'static str { |
| 63 | if on { "on" } else { "off" } |
| 64 | } |
| 65 | |
| 66 | /// Spec: realme_t310.md#identity |
| 67 | const BLUETOOTH_NAME: &str = "realme Buds T310"; |
| 68 | |
| 69 | /// Control services, in the order to try. Spec: realme_t310.md#transport |
| 70 | const SERVICES: [Uuid; 2] = [ |
| 71 | Uuid::from_u128(0x0000_079A_D102_11E1_9B23_0002_5B00_A5A5), |
| 72 | Uuid::from_u128(0x0000_1107_D102_11E1_9B23_0002_5B00_A5A5), |
| 73 | ]; |
| 74 | |
| 75 | /// Quiet time after connecting, before the first request. Spec: realme_t310.md#init |
| 76 | const SETTLE: Duration = Duration::from_millis(300); |
| 77 | |
| 78 | pub struct RealmeT310; |
| 79 | |
| 80 | impl Device for RealmeT310 { |
| 81 | fn name(&self) -> &'static str { |
| 82 | BLUETOOTH_NAME |
| 83 | } |
| 84 | |
| 85 | fn matches(&self, device: &PairedDevice) -> bool { |
| 86 | device.name == BLUETOOTH_NAME |
| 87 | } |
| 88 | |
| 89 | fn rfcomm_uuids(&self) -> &'static [Uuid] { |
| 90 | &SERVICES |
| 91 | } |
| 92 | |
| 93 | fn open(&self, transport: Box<dyn Transport>) -> Result<Box<dyn Session>> { |
| 94 | Ok(Box::new(T310Session::open(Link::new(transport, unix_time))?)) |
| 95 | } |
| 96 | } |
| 97 | |
| 98 | fn unix_time() -> u32 { |
| 99 | let seconds = SystemTime::now().duration_since(UNIX_EPOCH).map_or(0, |d| d.as_secs()); |
| 100 | u32::try_from(seconds).unwrap_or(u32::MAX) |
| 101 | } |
| 102 | |
| 103 | struct T310Session { |
| 104 | link: Link, |
| 105 | commands: Commands, |
| 106 | } |
| 107 | |
| 108 | /// Collects what a series of best-effort reads produced. |
| 109 | #[derive(Default)] |
| 110 | struct Reads { |
| 111 | warnings: Vec<String>, |
| 112 | answered: usize, |
| 113 | } |
| 114 | |
| 115 | impl T310Session { |
| 116 | /// The session start. Spec: realme_t310.md#init |
| 117 | fn open(mut link: Link) -> Result<Self> { |
| 118 | link.pump_until(Instant::now() + SETTLE)?; |
| 119 | |
| 120 | let bitmap = link.request(codec::HANDSHAKE, &[]).map_err(|error| match error { |
| 121 | // Provisional until checkpoint HW1: a link that connects but stays silent is most |
| 122 | // likely held by another app. Spec: realme_t310.md#open |
| 123 | Error::Timeout(_) => Error::ChannelBusy("connected, but the buds did not answer the handshake".to_owned()), |
| 124 | other => other, |
| 125 | })?; |
| 126 | let commands = Commands::parse(&bitmap)?; |
| 127 | |
| 128 | let product = codec::decode_product_id(&link.request(codec::PRODUCT_ID, &[])?)?; |
| 129 | if product != codec::T310_PRODUCT_ID { |
| 130 | return Err(Error::WrongModel { |
| 131 | expected: BLUETOOTH_NAME, |
| 132 | found: format!("{product:06X}"), |
| 133 | }); |
| 134 | } |
| 135 | |
| 136 | let offered = codec::decode_events_offered(&link.request(codec::EVENTS_OFFERED, &[])?)?; |
| 137 | let subscription = codec::subscribe_payload(&offered, &commands); |
| 138 | if commands.allows(codec::SUBSCRIBE) && subscription.len() > 1 { |
| 139 | // Some buds never acknowledge this, so budctl does not wait. Spec: realme_t310.md#subscribe |
| 140 | link.send(codec::SUBSCRIBE, &subscription)?; |
| 141 | } |
| 142 | Ok(Self { link, commands }) |
| 143 | } |
| 144 | |
| 145 | /// Read and decode one value, if the buds offer the command. A read the buds answer badly |
| 146 | /// (timeout, refusal, garbage) becomes a warning so the rest still shows; a lost link stops |
| 147 | /// everything. |
| 148 | fn read<T>( |
| 149 | &mut self, |
| 150 | reads: &mut Reads, |
| 151 | what: &str, |
| 152 | cmd: u16, |
| 153 | payload: &[u8], |
| 154 | decode: fn(&[u8]) -> Result<T>, |
| 155 | ) -> Result<Option<T>> { |
| 156 | if !self.commands.allows(cmd) { |
| 157 | return Ok(None); |
| 158 | } |
| 159 | match self.link.request(cmd, payload).and_then(|reply| decode(&reply)) { |
| 160 | Ok(value) => { |
| 161 | reads.answered += 1; |
| 162 | Ok(Some(value)) |
| 163 | } |
| 164 | Err(error) if error.kind() == Kind::Failed => { |
| 165 | reads.warnings.push(format!("{what}: {error}")); |
| 166 | Ok(None) |
| 167 | } |
| 168 | Err(error) => Err(error), |
| 169 | } |
| 170 | } |
| 171 | } |
| 172 | |
| 173 | impl T310Session { |
| 174 | /// After an acked write, read the setting back with `cmd query` until `check` reports the |
| 175 | /// new value, following `timing`. `check` returns whether the value is the one written, |
| 176 | /// and the value; `not_applied` describes a value that never changed. |
| 177 | /// Spec: realme_t310.md#write-read-back |
| 178 | fn read_back<T>( |
| 179 | &mut self, |
| 180 | timing: ReadBack, |
| 181 | cmd: u16, |
| 182 | query: &[u8], |
| 183 | check: impl Fn(&[u8]) -> Result<(bool, T)>, |
| 184 | not_applied: impl Fn(T) -> String, |
| 185 | ) -> Result<T> { |
| 186 | let acked = Instant::now(); |
| 187 | self.link.pump_until(acked + timing.first)?; |
| 188 | loop { |
| 189 | let (applied, value) = check(&self.link.request(cmd, query)?)?; |
| 190 | if applied { |
| 191 | return Ok(value); |
| 192 | } |
| 193 | if Instant::now() >= acked + timing.window { |
| 194 | return Err(Error::NotApplied(not_applied(value))); |
| 195 | } |
| 196 | self.link.pump_until(Instant::now() + READ_BACK_PAUSE)?; |
| 197 | } |
| 198 | } |
| 199 | } |
| 200 | |
| 201 | impl Session for T310Session { |
| 202 | /// Spec: realme_t310.md#buds-requests |
| 203 | fn serve(&mut self) -> Result<()> { |
| 204 | self.link.pump_until(Instant::now()) |
| 205 | } |
| 206 | |
| 207 | fn status(&mut self) -> Result<Status> { |
| 208 | let mut reads = Reads::default(); |
| 209 | let switches = self.read( |
| 210 | &mut reads, |
| 211 | "switches", |
| 212 | codec::SWITCHES, |
| 213 | &codec::SWITCH_QUERY, |
| 214 | codec::decode_switches, |
| 215 | )?; |
| 216 | let noise_control = self.read( |
| 217 | &mut reads, |
| 218 | "noise control", |
| 219 | codec::NOISE_CONTROL, |
| 220 | &codec::NOISE_MODE_QUERY, |
| 221 | codec::decode_noise_mode, |
| 222 | )?; |
| 223 | let battery = self.read(&mut reads, "battery", codec::BATTERY, &[], codec::decode_battery)?; |
| 224 | let eq = self.read(&mut reads, "EQ", codec::EQ_PRESET, &[], codec::decode_eq)?; |
| 225 | // No bass-level read: the T310 answers 0x0124 neither with bass boost off (HW1) nor on |
| 226 | // (W6a). Spec: realme_t310.md#bass-read |
| 227 | let codec = self.read(&mut reads, "codec", codec::CODEC, &[], codec::decode_codec)?; |
| 228 | let firmware = self.read(&mut reads, "firmware", codec::FIRMWARE, &[], codec::decode_firmware)?; |
| 229 | |
| 230 | if reads.answered == 0 && !reads.warnings.is_empty() { |
| 231 | return Err(Error::Timeout(reads.warnings.join("; "))); |
| 232 | } |
| 233 | Ok(Status { |
| 234 | battery: battery.unwrap_or_default(), |
| 235 | noise_control, |
| 236 | eq, |
| 237 | bass_level: None, |
| 238 | switches: switches.unwrap_or_default(), |
| 239 | codec, |
| 240 | firmware, |
| 241 | warnings: reads.warnings, |
| 242 | }) |
| 243 | } |
| 244 | |
| 245 | /// Spec: realme_t310.md#anc-write, #write-read-back |
| 246 | fn set_noise_control(&mut self, mode: NoiseMode) -> Result<NoiseControl> { |
| 247 | if !self.commands.allows(codec::NOISE_CONTROL_WRITE) || !self.commands.allows(codec::NOISE_CONTROL) { |
| 248 | return Err(Error::Unsupported( |
| 249 | "these buds do not offer noise-control settings".to_owned(), |
| 250 | )); |
| 251 | } |
| 252 | let reply = self |
| 253 | .link |
| 254 | .request(codec::NOISE_CONTROL_WRITE, &codec::noise_write_payload(mode))?; |
| 255 | codec::check_write_reply(&reply, "the noise-control change")?; |
| 256 | |
| 257 | let wanted = codec::noise_write_mask(mode); |
| 258 | self.read_back( |
| 259 | READ_BACK, |
| 260 | codec::NOISE_CONTROL, |
| 261 | &codec::NOISE_MODE_QUERY, |
| 262 | |reply| { |
| 263 | Ok(( |
| 264 | codec::decode_noise_mask(reply)? == wanted, |
| 265 | codec::decode_noise_mode(reply)?, |
| 266 | )) |
| 267 | }, |
| 268 | |now| { |
| 269 | let wanted = match mode { |
| 270 | NoiseMode::Anc(level) => format!("anc ({})", level.name()), |
| 271 | _ => mode.name().to_owned(), |
| 272 | }; |
| 273 | let reported = match &now.level { |
| 274 | Some(level) => format!("{} ({level})", now.mode), |
| 275 | None => now.mode, |
| 276 | }; |
| 277 | format!("the buds accepted noise control {wanted}, but still report {reported}") |
| 278 | }, |
| 279 | ) |
| 280 | } |
| 281 | |
| 282 | /// Spec: realme_t310.md#eq-read, #custom-eq |
| 283 | fn eq_presets(&mut self) -> Result<EqPresets> { |
| 284 | let mut reads = Reads::default(); |
| 285 | let current = self.read(&mut reads, "EQ", codec::EQ_PRESET, &[], codec::decode_eq)?; |
| 286 | let custom = self.read( |
| 287 | &mut reads, |
| 288 | "custom EQ list", |
| 289 | codec::CUSTOM_EQ_LIST, |
| 290 | &[], |
| 291 | codec::decode_custom_eqs, |
| 292 | )?; |
| 293 | let mut presets = codec::builtin_eqs(); |
| 294 | presets.extend(custom.into_iter().flatten()); |
| 295 | Ok(EqPresets { |
| 296 | current, |
| 297 | presets, |
| 298 | warnings: reads.warnings, |
| 299 | }) |
| 300 | } |
| 301 | |
| 302 | /// Built-in presets only; custom EQs come with W11. Spec: realme_t310.md#eq-write |
| 303 | fn set_eq(&mut self, preset: &str) -> Result<String> { |
| 304 | if codec::custom_eq_id(preset).is_some() { |
| 305 | return self.set_custom_eq(preset, &[]).map(|now| format!("custom-{}", now.id)); |
| 306 | } |
| 307 | let Some(id) = codec::eq_id(preset) else { |
| 308 | return Err(Error::Usage(format!( |
| 309 | "no EQ preset called {preset}; these buds have: {}, and the custom-<id> ones `budctl eq` lists", |
| 310 | codec::eq_names().join(", ") |
| 311 | ))); |
| 312 | }; |
| 313 | if !self.commands.allows(codec::EQ_SELECT) || !self.commands.allows(codec::EQ_PRESET) { |
| 314 | return Err(Error::Unsupported("these buds do not offer EQ presets".to_owned())); |
| 315 | } |
| 316 | let reply = self.link.request(codec::EQ_SELECT, &[id])?; |
| 317 | codec::check_write_reply(&reply, "the EQ change")?; |
| 318 | |
| 319 | self.read_back( |
| 320 | READ_BACK, |
| 321 | codec::EQ_PRESET, |
| 322 | &[], |
| 323 | |reply| { |
| 324 | let now = codec::decode_eq(reply)?; |
| 325 | Ok((now == preset, now)) |
| 326 | }, |
| 327 | |now| format!("the buds accepted EQ {preset}, but still report {now}"), |
| 328 | ) |
| 329 | } |
| 330 | |
| 331 | /// Spec: realme_t310.md#custom-eq, #write-read-back |
| 332 | fn set_custom_eq(&mut self, preset: &str, bands: &[EqBand]) -> Result<EqPreset> { |
| 333 | let Some(id) = codec::custom_eq_id(preset) else { |
| 334 | return Err(Error::Usage(format!( |
| 335 | "{preset} is not a custom preset; those are named custom-<id>, as `budctl eq` lists them" |
| 336 | ))); |
| 337 | }; |
| 338 | if !self.commands.allows(codec::CUSTOM_EQ_WRITE) || !self.commands.allows(codec::CUSTOM_EQ_LIST) { |
| 339 | return Err(Error::Unsupported( |
| 340 | "these buds do not offer custom EQ presets".to_owned(), |
| 341 | )); |
| 342 | } |
| 343 | // A save carries the whole preset, so it starts from the list read just now. |
| 344 | let list = codec::decode_custom_eq_list(&self.link.request(codec::CUSTOM_EQ_LIST, &[])?)?; |
| 345 | let Some(current) = list.iter().find(|p| p.id == id) else { |
| 346 | let have: Vec<String> = list.iter().map(|p| format!("custom-{}", p.id)).collect(); |
| 347 | return Err(Error::Usage(format!( |
| 348 | "these buds have no {preset}; their custom presets: {}", |
| 349 | if have.is_empty() { |
| 350 | "none".to_owned() |
| 351 | } else { |
| 352 | have.join(", ") |
| 353 | } |
| 354 | ))); |
| 355 | }; |
| 356 | let wanted = codec::retune(current, bands)?; |
| 357 | let reply = self |
| 358 | .link |
| 359 | .request(codec::CUSTOM_EQ_WRITE, &codec::custom_eq_save_payload(&wanted)?)?; |
| 360 | codec::check_write_reply(&reply, "saving the custom EQ")?; |
| 361 | |
| 362 | let now = self.read_back( |
| 363 | READ_BACK, |
| 364 | codec::CUSTOM_EQ_LIST, |
| 365 | &[], |
| 366 | |reply| { |
| 367 | let now = codec::decode_custom_eq_list(reply)?.into_iter().find(|p| p.id == id); |
| 368 | let applied = now.as_ref().is_some_and(|p| p.bands == wanted.bands && p.selected); |
| 369 | Ok((applied, now)) |
| 370 | }, |
| 371 | |now| match now { |
| 372 | None => format!("the buds accepted {preset}, but their list no longer has it"), |
| 373 | Some(p) if p.bands == wanted.bands => format!("the buds saved {preset}, but did not select it"), |
| 374 | Some(_) => format!("the buds accepted {preset}, but still report the old bands"), |
| 375 | }, |
| 376 | )?; |
| 377 | now.map(|p| p.preset()) |
| 378 | .ok_or_else(|| Error::Protocol(format!("{preset} vanished from the list"))) |
| 379 | } |
| 380 | |
| 381 | /// Ack-only: the T310 never answers the bass-level read. Spec: realme_t310.md#bass-write |
| 382 | /// Spec: realme_t310.md#custom-eq-create, #write-read-back |
| 383 | fn create_custom_eq(&mut self, name: &str) -> Result<EqPreset> { |
| 384 | if !self.commands.allows(codec::CUSTOM_EQ_WRITE) || !self.commands.allows(codec::CUSTOM_EQ_LIST) { |
| 385 | return Err(Error::Unsupported( |
| 386 | "these buds do not offer custom EQ presets".to_owned(), |
| 387 | )); |
| 388 | } |
| 389 | let list = codec::decode_custom_eq_list(&self.link.request(codec::CUSTOM_EQ_LIST, &[])?)?; |
| 390 | if list.len() >= codec::CUSTOM_EQ_MAX { |
| 391 | return Err(Error::Usage(format!( |
| 392 | "these buds keep at most {} custom presets, and have {}; change one of them instead", |
| 393 | codec::CUSTOM_EQ_MAX, |
| 394 | list.len() |
| 395 | ))); |
| 396 | } |
| 397 | if list.iter().any(|p| p.name == name.as_bytes()) { |
| 398 | return Err(Error::Usage(format!("a custom preset is called {name} already"))); |
| 399 | } |
| 400 | // The new preset copies the bands the buds use: the vendor's defaults do not hold here. |
| 401 | let Some(model) = list.first() else { |
| 402 | return Err(Error::Usage( |
| 403 | "budctl copies a new preset's bands from one the buds have, and these buds have none".to_owned(), |
| 404 | )); |
| 405 | }; |
| 406 | let new = codec::new_custom_eq(name, model)?; |
| 407 | let reply = self |
| 408 | .link |
| 409 | .request(codec::CUSTOM_EQ_WRITE, &codec::custom_eq_create_payload(&new)?)?; |
| 410 | let id = codec::decode_custom_eq_write_reply(&reply)?; |
| 411 | let created = self.read_back( |
| 412 | READ_BACK, |
| 413 | codec::CUSTOM_EQ_LIST, |
| 414 | &[], |
| 415 | |reply| { |
| 416 | let now = codec::decode_custom_eq_list(reply)?; |
| 417 | let created = codec::find_created(&now, &new.name, id).cloned(); |
| 418 | Ok((created.is_some(), created)) |
| 419 | }, |
| 420 | |_| format!("the buds accepted the new preset {name}, but their list does not have it"), |
| 421 | )?; |
| 422 | created |
| 423 | .map(|p| p.preset()) |
| 424 | .ok_or_else(|| Error::Protocol(format!("the new preset {name} vanished from the list"))) |
| 425 | } |
| 426 | |
| 427 | /// Spec: realme_t310.md#custom-eq-rename, #write-read-back |
| 428 | fn rename_custom_eq(&mut self, preset: &str, name: &str) -> Result<EqPreset> { |
| 429 | let Some(id) = codec::custom_eq_id(preset) else { |
| 430 | return Err(Error::Usage(format!( |
| 431 | "{preset} is not a custom preset; those are named custom-<id>, as `budctl eq` lists them" |
| 432 | ))); |
| 433 | }; |
| 434 | if !self.commands.allows(codec::CUSTOM_EQ_WRITE) || !self.commands.allows(codec::CUSTOM_EQ_LIST) { |
| 435 | return Err(Error::Unsupported( |
| 436 | "these buds do not offer custom EQ presets".to_owned(), |
| 437 | )); |
| 438 | } |
| 439 | // A save carries the whole preset, so it starts from the list read just now. |
| 440 | let list = codec::decode_custom_eq_list(&self.link.request(codec::CUSTOM_EQ_LIST, &[])?)?; |
| 441 | let Some(current) = list.iter().find(|p| p.id == id) else { |
| 442 | return Err(Error::Usage(format!("these buds have no {preset}"))); |
| 443 | }; |
| 444 | if list.iter().any(|p| p.id != id && p.name == name.as_bytes()) { |
| 445 | return Err(Error::Usage(format!("a custom preset is called {name} already"))); |
| 446 | } |
| 447 | let wanted = codec::renamed(current, name)?; |
| 448 | let reply = self |
| 449 | .link |
| 450 | .request(codec::CUSTOM_EQ_WRITE, &codec::custom_eq_save_payload(&wanted)?)?; |
| 451 | codec::check_write_reply(&reply, "renaming the custom EQ")?; |
| 452 | let now = self.read_back( |
| 453 | READ_BACK, |
| 454 | codec::CUSTOM_EQ_LIST, |
| 455 | &[], |
| 456 | |reply| { |
| 457 | let now = codec::decode_custom_eq_list(reply)?.into_iter().find(|p| p.id == id); |
| 458 | let applied = now.as_ref().is_some_and(|p| p.name == wanted.name); |
| 459 | Ok((applied, now)) |
| 460 | }, |
| 461 | |now| match now { |
| 462 | None => format!("the buds accepted the new name, but their list no longer has {preset}"), |
| 463 | Some(_) => format!("the buds accepted the new name, but still list {preset} under the old one"), |
| 464 | }, |
| 465 | )?; |
| 466 | now.map(|p| p.preset()) |
| 467 | .ok_or_else(|| Error::Protocol(format!("{preset} vanished from the list"))) |
| 468 | } |
| 469 | |
| 470 | /// Spec: realme_t310.md#bass-write |
| 471 | fn bass_range(&self) -> Option<(i8, i8)> { |
| 472 | self.commands |
| 473 | .allows(codec::BASS_LEVEL_WRITE) |
| 474 | .then_some(codec::BASS_RANGE) |
| 475 | } |
| 476 | |
| 477 | fn set_bass_level(&mut self, level: i8) -> Result<()> { |
| 478 | let payload = codec::bass_write_payload(level)?; |
| 479 | if !self.commands.allows(codec::BASS_LEVEL_WRITE) { |
| 480 | return Err(Error::Unsupported("these buds do not offer a bass level".to_owned())); |
| 481 | } |
| 482 | let reply = self.link.request(codec::BASS_LEVEL_WRITE, &payload)?; |
| 483 | codec::check_write_reply(&reply, "the bass-level change") |
| 484 | } |
| 485 | |
| 486 | /// Spec: realme_t310.md#find |
| 487 | fn find(&mut self, ring: bool) -> Result<()> { |
| 488 | if !self.commands.allows(codec::FIND) { |
| 489 | return Err(Error::Unsupported("these buds cannot ring through budctl".to_owned())); |
| 490 | } |
| 491 | let reply = self.link.request(codec::FIND, &codec::find_payload(ring))?; |
| 492 | codec::check_write_reply(&reply, if ring { "ringing" } else { "stopping the ringing" }) |
| 493 | } |
| 494 | |
| 495 | /// Spec: realme_t310.md#switch-write, #write-read-back |
| 496 | fn set_switch(&mut self, key: &str, on: bool) -> Result<Switch> { |
| 497 | let Some(id) = codec::switch_id(key) else { |
| 498 | return Err(Error::Unsupported(format!("these buds have no switch called {key}"))); |
| 499 | }; |
| 500 | let Some(&(_, timing)) = WRITABLE_SWITCHES.iter().find(|(k, _)| *k == key) else { |
| 501 | return Err(Error::Unsupported(format!("changing {key} is not supported yet"))); |
| 502 | }; |
| 503 | if !self.commands.allows(codec::SWITCH_WRITE) || !self.commands.allows(codec::SWITCHES) { |
| 504 | return Err(Error::Unsupported("these buds do not offer switch settings".to_owned())); |
| 505 | } |
| 506 | let reply = self |
| 507 | .link |
| 508 | .request(codec::SWITCH_WRITE, &codec::switch_write_payload(id, on))?; |
| 509 | codec::check_write_reply(&reply, "the switch change")?; |
| 510 | |
| 511 | self.read_back( |
| 512 | timing, |
| 513 | codec::SWITCHES, |
| 514 | &codec::SWITCH_QUERY, |
| 515 | |reply| { |
| 516 | let switch = codec::decode_switches(reply)? |
| 517 | .into_iter() |
| 518 | .find(|s| s.key == key) |
| 519 | .ok_or_else(|| Error::Protocol(format!("the switch reply has no {key}")))?; |
| 520 | Ok((switch.on == on, switch)) |
| 521 | }, |
| 522 | |now| { |
| 523 | format!( |
| 524 | "the buds accepted {} {}, but still report {}", |
| 525 | now.label, |
| 526 | on_off(on), |
| 527 | on_off(now.on) |
| 528 | ) |
| 529 | }, |
| 530 | ) |
| 531 | } |
| 532 | |
| 533 | fn touch_controls(&mut self) -> Result<TouchControls> { |
| 534 | if !self.commands.allows(codec::GESTURES) { |
| 535 | return Err(Error::Unsupported( |
| 536 | "these buds do not offer touch-control settings".to_owned(), |
| 537 | )); |
| 538 | } |
| 539 | let gestures = codec::decode_gestures(&self.link.request(codec::GESTURES, &[])?)?; |
| 540 | let mut reads = Reads::default(); |
| 541 | let hold_cycle = self.read( |
| 542 | &mut reads, |
| 543 | "hold cycle", |
| 544 | codec::NOISE_CONTROL, |
| 545 | &codec::HOLD_CYCLE_QUERY, |
| 546 | codec::decode_hold_cycle, |
| 547 | )?; |
| 548 | // The choices only when the buds take writes: the GUI offers what it shows here. |
| 549 | let writable = |cmd| self.commands.allows(cmd); |
| 550 | let choices = if writable(codec::GESTURE_WRITE) { |
| 551 | codec::touch_choices() |
| 552 | } else { |
| 553 | Vec::new() |
| 554 | }; |
| 555 | let cycle_modes = if hold_cycle.is_some() && writable(codec::NOISE_CONTROL_WRITE) { |
| 556 | codec::cycle_modes() |
| 557 | } else { |
| 558 | Vec::new() |
| 559 | }; |
| 560 | Ok(TouchControls { |
| 561 | gestures, |
| 562 | hold_cycle, |
| 563 | choices, |
| 564 | cycle_modes, |
| 565 | warnings: reads.warnings, |
| 566 | }) |
| 567 | } |
| 568 | |
| 569 | /// Spec: realme_t310.md#hold-cycle-write, #write-read-back |
| 570 | fn set_hold_cycle(&mut self, modes: &[&str]) -> Result<Vec<String>> { |
| 571 | let mask = codec::hold_cycle_mask(modes)?; |
| 572 | if !self.commands.allows(codec::NOISE_CONTROL_WRITE) || !self.commands.allows(codec::NOISE_CONTROL) { |
| 573 | return Err(Error::Unsupported( |
| 574 | "these buds do not offer noise-control settings".to_owned(), |
| 575 | )); |
| 576 | } |
| 577 | let reply = self |
| 578 | .link |
| 579 | .request(codec::NOISE_CONTROL_WRITE, &codec::hold_cycle_write_payload(mask))?; |
| 580 | codec::check_write_reply(&reply, "the hold-cycle change")?; |
| 581 | |
| 582 | self.read_back( |
| 583 | READ_BACK, |
| 584 | codec::NOISE_CONTROL, |
| 585 | &codec::HOLD_CYCLE_QUERY, |
| 586 | |reply| { |
| 587 | Ok(( |
| 588 | codec::decode_hold_cycle_mask(reply)? == mask, |
| 589 | codec::decode_hold_cycle(reply)?, |
| 590 | )) |
| 591 | }, |
| 592 | |now| { |
| 593 | format!( |
| 594 | "the buds accepted the hold cycle {}, but still report {}", |
| 595 | modes.join(" → "), |
| 596 | now.join(" → ") |
| 597 | ) |
| 598 | }, |
| 599 | ) |
| 600 | } |
| 601 | |
| 602 | /// Spec: realme_t310.md#gesture-write, #gesture-choices |
| 603 | fn set_touch(&mut self, side: &str, gesture: &str, action: &str, dry_run: bool) -> Result<TouchChange> { |
| 604 | let target = codec::touch_target(side, gesture, action)?; |
| 605 | if !self.commands.allows(codec::GESTURE_WRITE) || !self.commands.allows(codec::GESTURES) { |
| 606 | return Err(Error::Unsupported( |
| 607 | "these buds do not offer touch-control settings".to_owned(), |
| 608 | )); |
| 609 | } |
| 610 | // The write carries the whole table, so it starts from the table read just now. |
| 611 | let before = codec::decode_gesture_entries(&self.link.request(codec::GESTURES, &[])?)?; |
| 612 | let after = codec::retarget_gestures(&before, &target)?; |
| 613 | let changes: Vec<GestureChange> = before |
| 614 | .iter() |
| 615 | .zip(&after) |
| 616 | .filter(|(old, new)| old != new) |
| 617 | .map(|(old, new)| { |
| 618 | let (old, new) = (codec::name_gesture(old), codec::name_gesture(new)); |
| 619 | GestureChange { |
| 620 | side: new.side, |
| 621 | gesture: new.gesture, |
| 622 | from: old.action, |
| 623 | to: new.action, |
| 624 | } |
| 625 | }) |
| 626 | .collect(); |
| 627 | let planned: Vec<_> = after.iter().map(codec::name_gesture).collect(); |
| 628 | if changes.is_empty() { |
| 629 | return Ok(TouchChange { |
| 630 | changes, |
| 631 | write: None, |
| 632 | sent: false, |
| 633 | gestures: planned, |
| 634 | }); |
| 635 | } |
| 636 | let write = RawWrite { |
| 637 | command: codec::GESTURE_WRITE, |
| 638 | payload: codec::gesture_write_payload(&after)?, |
| 639 | }; |
| 640 | if dry_run { |
| 641 | return Ok(TouchChange { |
| 642 | changes, |
| 643 | write: Some(write), |
| 644 | sent: false, |
| 645 | gestures: planned, |
| 646 | }); |
| 647 | } |
| 648 | |
| 649 | let reply = self.link.request(write.command, &write.payload)?; |
| 650 | codec::check_write_reply(&reply, "the touch-control change")?; |
| 651 | let gestures = self.read_back( |
| 652 | TOUCH_READ_BACK, |
| 653 | codec::GESTURES, |
| 654 | &[], |
| 655 | |reply| { |
| 656 | let now = codec::decode_gesture_entries(reply)?; |
| 657 | // Applied when retargeting the table read back would change nothing. |
| 658 | let applied = codec::retarget_gestures(&now, &target).is_ok_and(|again| again == now); |
| 659 | Ok((applied, now)) |
| 660 | }, |
| 661 | |now| { |
| 662 | let still: Vec<String> = changes |
| 663 | .iter() |
| 664 | .filter_map(|change| { |
| 665 | now.iter() |
| 666 | .map(codec::name_gesture) |
| 667 | .find(|g| g.group.is_none() && g.side == change.side && g.gesture == change.gesture) |
| 668 | }) |
| 669 | .filter(|g| g.action != action) |
| 670 | .map(|g| format!("{} {} {}", g.side, g.gesture, g.action)) |
| 671 | .collect(); |
| 672 | if still.is_empty() { |
| 673 | format!("the buds accepted {side} {gesture} {action}, but the table read back does not show it") |
| 674 | } else { |
| 675 | format!( |
| 676 | "the buds accepted {side} {gesture} {action}, but still report {}", |
| 677 | still.join(", ") |
| 678 | ) |
| 679 | } |
| 680 | }, |
| 681 | )?; |
| 682 | Ok(TouchChange { |
| 683 | changes, |
| 684 | write: Some(write), |
| 685 | sent: true, |
| 686 | gestures: gestures.iter().map(codec::name_gesture).collect(), |
| 687 | }) |
| 688 | } |
| 689 | } |
| 690 | |
| 691 | #[cfg(test)] |
| 692 | mod tests { |
| 693 | use super::*; |
| 694 | use crate::status::{AncLevel, Charge}; |
| 695 | use crate::transport::mock::{Script, Step, hex}; |
| 696 | |
| 697 | fn tx(cmd: u16, seq: u8, payload: &str) -> Step { |
| 698 | Step::Tx(frame::encode(cmd, seq, &hex(payload)).unwrap()) |
| 699 | } |
| 700 | |
| 701 | fn rx(cmd: u16, seq: u8, payload: &str) -> Step { |
| 702 | Step::Rx(frame::encode(cmd, seq, &hex(payload)).unwrap()) |
| 703 | } |
| 704 | |
| 705 | fn fixed_clock() -> u32 { |
| 706 | 1_750_000_000 |
| 707 | } |
| 708 | |
| 709 | fn open(script: &Script) -> Result<T310Session> { |
| 710 | T310Session::open(Link::new(script.transport(), fixed_clock)) |
| 711 | } |
| 712 | |
| 713 | /// The handshake of the owner's T310 (HW1); seq 01-04 are used up. |
| 714 | fn handshake() -> Vec<Step> { |
| 715 | vec![ |
| 716 | tx(0x0100, 0x01, ""), |
| 717 | rx(0x8100, 0x01, codec::T310_BITMAP_REPLY), |
| 718 | tx(0x0103, 0x02, ""), |
| 719 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 720 | tx(0x0200, 0x03, ""), |
| 721 | rx(0x8200, 0x03, "00 09 01 02 03 04 05 06 0D F1 F4"), |
| 722 | tx(0x0205, 0x04, "04 01 02 03 04"), |
| 723 | rx(0x8205, 0x04, "00 04 01 00 02 00 03 00 04 00"), |
| 724 | ] |
| 725 | } |
| 726 | |
| 727 | #[test] |
| 728 | fn serve_answers_the_buds_at_once() { |
| 729 | let mut steps = handshake(); |
| 730 | // The time request, at Unix time 1750000000. Spec: realme_t310.md#buds-requests |
| 731 | steps.extend([rx(0x0500, 0x02, ""), tx(0x8500, 0x02, "00 80 E1 4E 68")]); |
| 732 | let script = Script::new(steps); |
| 733 | let mut session = open(&script).unwrap(); |
| 734 | session.serve().unwrap(); |
| 735 | script.assert_done(); |
| 736 | |
| 737 | let mut steps = handshake(); |
| 738 | steps.push(Step::Close); |
| 739 | let script = Script::new(steps); |
| 740 | let mut session = open(&script).unwrap(); |
| 741 | assert!(matches!(session.serve(), Err(Error::NotConnected(_)))); |
| 742 | } |
| 743 | |
| 744 | #[test] |
| 745 | fn full_status() { |
| 746 | let mut steps = handshake(); |
| 747 | let mut firmware = String::from("00 03"); |
| 748 | for byte in b"1,2,120,2,2,120,3,2,105" { |
| 749 | firmware.push_str(&format!(" {byte:02X}")); |
| 750 | } |
| 751 | steps.extend([ |
| 752 | tx(0x010D, 0x05, "06 05 06 11 1A 1B 1D"), |
| 753 | rx(0x810D, 0x05, "00 06 05 00 06 00 11 01 1A 00 1B 01 1D 01"), |
| 754 | tx(0x010C, 0x06, "01 01"), |
| 755 | rx(0x810C, 0x06, "00 01 01 08"), |
| 756 | tx(0x0106, 0x07, ""), |
| 757 | rx(0x8106, 0x07, "00 03 01 50 02 E4 03 3C"), |
| 758 | tx(0x010F, 0x08, ""), |
| 759 | rx(0x810F, 0x08, "00 01"), |
| 760 | tx(0x0114, 0x09, ""), |
| 761 | rx(0x8114, 0x09, "00 02"), |
| 762 | tx(0x0105, 0x0A, ""), |
| 763 | rx(0x8105, 0x0A, &firmware), |
| 764 | ]); |
| 765 | let script = Script::new(steps); |
| 766 | let status = open(&script).unwrap().status().unwrap(); |
| 767 | script.assert_done(); |
| 768 | |
| 769 | assert_eq!( |
| 770 | status.battery.left, |
| 771 | Some(Charge { |
| 772 | level: 80, |
| 773 | charging: false |
| 774 | }) |
| 775 | ); |
| 776 | assert_eq!( |
| 777 | status.battery.right, |
| 778 | Some(Charge { |
| 779 | level: 100, |
| 780 | charging: true |
| 781 | }) |
| 782 | ); |
| 783 | assert_eq!( |
| 784 | status.battery.case, |
| 785 | Some(Charge { |
| 786 | level: 60, |
| 787 | charging: false |
| 788 | }) |
| 789 | ); |
| 790 | let noise = status.noise_control.unwrap(); |
| 791 | assert_eq!((noise.mode.as_str(), noise.level.as_deref()), ("anc", Some("deep"))); |
| 792 | assert_eq!(status.eq.as_deref(), Some("deep-bass")); |
| 793 | assert_eq!(status.bass_level, None); |
| 794 | assert_eq!(status.codec.as_deref(), Some("AAC")); |
| 795 | assert_eq!(status.firmware.as_deref(), Some("120.120.105")); |
| 796 | let game = status.switches.iter().find(|s| s.key == "game").unwrap(); |
| 797 | assert!(!game.on); |
| 798 | assert_eq!(status.switches.len(), 5); |
| 799 | assert!(status.warnings.is_empty()); |
| 800 | } |
| 801 | |
| 802 | #[test] |
| 803 | fn answers_the_time_request_during_the_settle() { |
| 804 | let mut steps = vec![ |
| 805 | rx(0x0500, 0x01, ""), |
| 806 | Step::Tx(hex("AA 0C 00 00 00 85 01 05 00 00 80 E1 4E 68")), |
| 807 | ]; |
| 808 | steps.extend(handshake()); |
| 809 | // No 0x8205 ack this time: it may never arrive, and `open` does not wait for it. |
| 810 | // Spec: realme_t310.md#subscribe |
| 811 | steps.pop(); |
| 812 | let script = Script::new(steps); |
| 813 | open(&script).unwrap(); |
| 814 | script.assert_done(); |
| 815 | } |
| 816 | |
| 817 | #[test] |
| 818 | fn a_silent_handshake_reports_a_busy_channel() { |
| 819 | let script = Script::new(vec![tx(0x0100, 0x01, "")]); |
| 820 | assert!(matches!(open(&script), Err(Error::ChannelBusy(_)))); |
| 821 | } |
| 822 | |
| 823 | #[test] |
| 824 | fn other_models_are_refused() { |
| 825 | let script = Script::new(vec![ |
| 826 | tx(0x0100, 0x01, ""), |
| 827 | rx(0x8100, 0x01, codec::T310_BITMAP_REPLY), |
| 828 | tx(0x0103, 0x02, ""), |
| 829 | rx(0x8103, 0x02, "00 14 54 06"), |
| 830 | ]); |
| 831 | match open(&script) { |
| 832 | Err(Error::WrongModel { found, .. }) => assert_eq!(found, "065414"), |
| 833 | other => panic!("expected WrongModel, got {:?}", other.err()), |
| 834 | } |
| 835 | } |
| 836 | |
| 837 | #[test] |
| 838 | fn commands_missing_from_the_bitmap_are_never_sent() { |
| 839 | // A bitmap with no bits: only always-allowed commands go out, and no subscription. |
| 840 | let script = Script::new(vec![ |
| 841 | tx(0x0100, 0x01, ""), |
| 842 | rx(0x8100, 0x01, "00"), |
| 843 | tx(0x0103, 0x02, ""), |
| 844 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 845 | tx(0x0200, 0x03, ""), |
| 846 | rx(0x8200, 0x03, "00 02 01 02"), |
| 847 | tx(0x010D, 0x04, "06 05 06 11 1A 1B 1D"), |
| 848 | rx(0x810D, 0x04, "00 01 06 01"), |
| 849 | tx(0x0106, 0x05, ""), |
| 850 | // no battery reply: becomes a warning |
| 851 | ]); |
| 852 | let status = open(&script).unwrap().status().unwrap(); |
| 853 | script.assert_done(); |
| 854 | assert_eq!(status.switches.len(), 1); |
| 855 | assert!(status.noise_control.is_none() && status.firmware.is_none()); |
| 856 | assert_eq!(status.warnings.len(), 1); |
| 857 | assert!(status.warnings.first().unwrap().starts_with("battery")); |
| 858 | } |
| 859 | |
| 860 | #[test] |
| 861 | fn a_lost_link_stops_the_status() { |
| 862 | let mut steps = handshake(); |
| 863 | steps.extend([tx(0x010D, 0x05, "06 05 06 11 1A 1B 1D"), Step::Close]); |
| 864 | let script = Script::new(steps); |
| 865 | assert!(matches!(open(&script).unwrap().status(), Err(Error::NotConnected(_)))); |
| 866 | } |
| 867 | |
| 868 | #[test] |
| 869 | fn touch_controls_and_hold_cycle() { |
| 870 | let mut steps = handshake(); |
| 871 | steps.extend([ |
| 872 | tx(0x0108, 0x05, ""), |
| 873 | rx(0x8108, 0x05, "00 02 01 01 02 01 02 01 04 08"), |
| 874 | tx(0x010C, 0x06, "02 01"), |
| 875 | rx(0x810C, 0x06, "00 02 01 0A"), |
| 876 | ]); |
| 877 | let script = Script::new(steps); |
| 878 | let touch = open(&script).unwrap().touch_controls().unwrap(); |
| 879 | script.assert_done(); |
| 880 | assert_eq!(touch.gestures.len(), 2); |
| 881 | assert_eq!(touch.hold_cycle.unwrap(), ["transparency", "anc"]); |
| 882 | let gestures: Vec<&str> = touch.choices.iter().map(|c| c.gesture.as_str()).collect(); |
| 883 | assert_eq!(gestures, ["double-tap", "triple-tap", "hold"]); |
| 884 | let hold = touch.choices.iter().find(|c| c.gesture == "hold").unwrap(); |
| 885 | assert_eq!(hold.actions, ["none", "noise-cycle", "voice-assistant", "game-mode"]); |
| 886 | assert_eq!(touch.cycle_modes, ["off", "transparency", "anc"]); |
| 887 | } |
| 888 | |
| 889 | /// The owner's `budctl --debug touch` (HW1), byte for byte. The buds' own frames (slice |
| 890 | /// byte 08) arrive glued to replies and need no answer. |
| 891 | #[test] |
| 892 | fn replays_the_hw1_touch_session() { |
| 893 | let script = Script::new(vec![ |
| 894 | Step::Tx(hex("AA 07 00 00 00 01 01 00 00")), |
| 895 | Step::Rx(hex( |
| 896 | "AA 10 00 00 00 81 01 09 00 00 BF 1F 5A 20 45 04 40 00 AA 07 08 00 01 05 0F 00 00", |
| 897 | )), |
| 898 | Step::Tx(hex("AA 07 00 00 03 01 02 00 00")), |
| 899 | Step::Rx(hex("AA 0B 00 00 03 81 02 04 00 00 12 3C 06")), |
| 900 | Step::Tx(hex("AA 07 00 00 00 02 03 00 00")), |
| 901 | Step::Rx(hex("AA 12 00 00 00 82 03 0B 00 00 09 01 02 03 04 05 06 0D F1 F4")), |
| 902 | Step::Tx(hex("AA 0C 00 00 05 02 04 05 00 04 01 02 03 04")), |
| 903 | Step::Rx(hex( |
| 904 | "AA 11 00 00 05 82 04 0A 00 00 04 01 00 02 00 03 00 04 00 AA 0F 08 00 04 02 10 08 00 01 03 02 64 01 64 03 00", |
| 905 | )), |
| 906 | Step::Tx(hex("AA 07 00 00 08 01 05 00 00")), |
| 907 | Step::Rx(hex( |
| 908 | "AA 21 00 00 08 81 05 1A 00 00 06 01 01 02 01 01 01 03 06 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08", |
| 909 | )), |
| 910 | Step::Tx(hex("AA 09 00 00 0C 01 06 02 00 02 01")), |
| 911 | Step::Rx(hex("AA 0B 00 00 0C 81 06 04 00 00 02 01 0A")), |
| 912 | ]); |
| 913 | let touch = open(&script).unwrap().touch_controls().unwrap(); |
| 914 | script.assert_done(); |
| 915 | let table: Vec<(&str, &str, &str)> = touch |
| 916 | .gestures |
| 917 | .iter() |
| 918 | .map(|g| (g.side.as_str(), g.gesture.as_str(), g.action.as_str())) |
| 919 | .collect(); |
| 920 | assert_eq!( |
| 921 | table, |
| 922 | [ |
| 923 | ("left", "double-tap", "play-pause"), |
| 924 | ("left", "triple-tap", "next"), |
| 925 | ("left", "hold", "noise-cycle"), |
| 926 | ("right", "double-tap", "play-pause"), |
| 927 | ("right", "triple-tap", "next"), |
| 928 | ("right", "hold", "noise-cycle"), |
| 929 | ] |
| 930 | ); |
| 931 | assert_eq!(touch.hold_cycle.unwrap(), ["transparency", "anc"]); |
| 932 | assert!(touch.warnings.is_empty()); |
| 933 | } |
| 934 | |
| 935 | #[test] |
| 936 | fn sets_noise_control_and_reads_it_back() { |
| 937 | let mut steps = handshake(); |
| 938 | steps.extend([ |
| 939 | tx(0x0404, 0x05, "01 01 02"), |
| 940 | rx(0x8404, 0x05, "00"), |
| 941 | // The buds announce the change; it needs no answer. |
| 942 | rx(0x0204, 0x10, "03 01 01 02"), |
| 943 | tx(0x010C, 0x06, "01 01"), |
| 944 | rx(0x810C, 0x06, "00 01 01 02"), |
| 945 | ]); |
| 946 | let script = Script::new(steps); |
| 947 | let now = open(&script) |
| 948 | .unwrap() |
| 949 | .set_noise_control(NoiseMode::Transparency) |
| 950 | .unwrap(); |
| 951 | script.assert_done(); |
| 952 | assert_eq!((now.mode.as_str(), now.level), ("transparency", None)); |
| 953 | } |
| 954 | |
| 955 | #[test] |
| 956 | fn reads_back_again_until_the_change_shows() { |
| 957 | let mut steps = handshake(); |
| 958 | steps.extend([ |
| 959 | tx(0x0404, 0x05, "01 01 01"), |
| 960 | rx(0x8404, 0x05, "00"), |
| 961 | tx(0x010C, 0x06, "01 01"), |
| 962 | rx(0x810C, 0x06, "00 01 01 08"), |
| 963 | tx(0x010C, 0x07, "01 01"), |
| 964 | rx(0x810C, 0x07, "00 01 01 01"), |
| 965 | ]); |
| 966 | let script = Script::new(steps); |
| 967 | let now = open(&script).unwrap().set_noise_control(NoiseMode::Off).unwrap(); |
| 968 | script.assert_done(); |
| 969 | assert_eq!(now.mode, "off"); |
| 970 | } |
| 971 | |
| 972 | #[test] |
| 973 | fn sets_a_noise_cancelling_level() { |
| 974 | let mut steps = handshake(); |
| 975 | steps.extend([ |
| 976 | tx(0x0404, 0x05, "01 01 04"), |
| 977 | rx(0x8404, 0x05, "00"), |
| 978 | tx(0x010C, 0x06, "01 01"), |
| 979 | rx(0x810C, 0x06, "00 01 01 04"), |
| 980 | ]); |
| 981 | let script = Script::new(steps); |
| 982 | let now = open(&script) |
| 983 | .unwrap() |
| 984 | .set_noise_control(NoiseMode::Anc(AncLevel::Light)) |
| 985 | .unwrap(); |
| 986 | script.assert_done(); |
| 987 | assert_eq!((now.mode.as_str(), now.level.as_deref()), ("anc", Some("light"))); |
| 988 | } |
| 989 | |
| 990 | #[test] |
| 991 | fn a_rejected_noise_control_change_is_not_read_back() { |
| 992 | let mut steps = handshake(); |
| 993 | steps.extend([tx(0x0404, 0x05, "01 01 08"), rx(0x8404, 0x05, "0E")]); |
| 994 | let script = Script::new(steps); |
| 995 | let result = open(&script).unwrap().set_noise_control(NoiseMode::Anc(AncLevel::Deep)); |
| 996 | script.assert_done(); |
| 997 | assert!(matches!(result, Err(Error::Rejected { status: 0x0E, .. }))); |
| 998 | } |
| 999 | |
| 1000 | #[test] |
| 1001 | fn noise_control_is_not_written_without_its_bitmap_bit() { |
| 1002 | let script = Script::new(vec![ |
| 1003 | tx(0x0100, 0x01, ""), |
| 1004 | rx(0x8100, 0x01, "00"), |
| 1005 | tx(0x0103, 0x02, ""), |
| 1006 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 1007 | tx(0x0200, 0x03, ""), |
| 1008 | rx(0x8200, 0x03, "00 00"), |
| 1009 | ]); |
| 1010 | let result = open(&script).unwrap().set_noise_control(NoiseMode::Off); |
| 1011 | script.assert_done(); |
| 1012 | assert!(matches!(result, Err(Error::Unsupported(_)))); |
| 1013 | } |
| 1014 | |
| 1015 | #[test] |
| 1016 | fn sets_game_mode_and_reads_it_back() { |
| 1017 | let mut steps = handshake(); |
| 1018 | steps.extend([ |
| 1019 | tx(0x0403, 0x05, "06 01"), |
| 1020 | rx(0x8403, 0x05, "00"), |
| 1021 | // Still the old value: budctl reads again. |
| 1022 | tx(0x010D, 0x06, "06 05 06 11 1A 1B 1D"), |
| 1023 | rx(0x810D, 0x06, "00 06 05 00 06 00 11 00 1A 01 1B 00 1D 00"), |
| 1024 | tx(0x010D, 0x07, "06 05 06 11 1A 1B 1D"), |
| 1025 | rx(0x810D, 0x07, "00 06 05 00 06 01 11 00 1A 01 1B 00 1D 00"), |
| 1026 | ]); |
| 1027 | let script = Script::new(steps); |
| 1028 | let game = open(&script).unwrap().set_switch("game", true).unwrap(); |
| 1029 | script.assert_done(); |
| 1030 | assert_eq!((game.key, game.on), ("game", true)); |
| 1031 | } |
| 1032 | |
| 1033 | #[test] |
| 1034 | fn unknown_switches_are_never_written() { |
| 1035 | // Nothing is sent after the handshake, so the subscribe ack is left out. |
| 1036 | let mut steps = handshake(); |
| 1037 | steps.pop(); |
| 1038 | let script = Script::new(steps); |
| 1039 | let mut session = open(&script).unwrap(); |
| 1040 | assert!(matches!(session.set_switch("turbo", true), Err(Error::Unsupported(_)))); |
| 1041 | script.assert_done(); |
| 1042 | } |
| 1043 | |
| 1044 | #[test] |
| 1045 | fn sets_bass_boost_and_reads_it_back_at_once() { |
| 1046 | let mut steps = handshake(); |
| 1047 | steps.extend([ |
| 1048 | tx(0x0403, 0x05, "1D 01"), |
| 1049 | rx(0x8403, 0x05, "00"), |
| 1050 | tx(0x010D, 0x06, "06 05 06 11 1A 1B 1D"), |
| 1051 | rx(0x810D, 0x06, "00 06 05 00 06 00 11 00 1A 01 1B 00 1D 01"), |
| 1052 | ]); |
| 1053 | let script = Script::new(steps); |
| 1054 | let now = open(&script).unwrap().set_switch("bass-boost", true).unwrap(); |
| 1055 | script.assert_done(); |
| 1056 | assert_eq!((now.key, now.on), ("bass-boost", true)); |
| 1057 | } |
| 1058 | |
| 1059 | #[test] |
| 1060 | fn a_switch_the_buds_lack_is_rejected() { |
| 1061 | let mut steps = handshake(); |
| 1062 | steps.extend([tx(0x0403, 0x05, "06 00"), rx(0x8403, 0x05, "01")]); |
| 1063 | let script = Script::new(steps); |
| 1064 | let result = open(&script).unwrap().set_switch("game", false); |
| 1065 | script.assert_done(); |
| 1066 | assert!(matches!(result, Err(Error::Rejected { status: 0x01, .. }))); |
| 1067 | } |
| 1068 | |
| 1069 | #[test] |
| 1070 | fn selects_an_eq_preset_and_reads_it_back() { |
| 1071 | let mut steps = handshake(); |
| 1072 | steps.extend([ |
| 1073 | tx(0x0406, 0x05, "01"), |
| 1074 | rx(0x8406, 0x05, "00"), |
| 1075 | tx(0x010F, 0x06, ""), |
| 1076 | rx(0x810F, 0x06, "00 01"), |
| 1077 | ]); |
| 1078 | let script = Script::new(steps); |
| 1079 | let now = open(&script).unwrap().set_eq("deep-bass").unwrap(); |
| 1080 | script.assert_done(); |
| 1081 | assert_eq!(now, "deep-bass"); |
| 1082 | } |
| 1083 | |
| 1084 | #[test] |
| 1085 | fn an_unknown_eq_preset_is_a_usage_error() { |
| 1086 | let mut steps = handshake(); |
| 1087 | steps.pop(); |
| 1088 | let script = Script::new(steps); |
| 1089 | let result = open(&script).unwrap().set_eq("loudness"); |
| 1090 | script.assert_done(); |
| 1091 | match result { |
| 1092 | Err(Error::Usage(message)) => assert!(message.contains("pure-raw, deep-bass, pure-vocals, pure-bass")), |
| 1093 | other => panic!("expected a usage error, got {other:?}"), |
| 1094 | } |
| 1095 | } |
| 1096 | |
| 1097 | #[test] |
| 1098 | fn rings_and_stops() { |
| 1099 | let mut steps = handshake(); |
| 1100 | steps.extend([ |
| 1101 | tx(0x0400, 0x05, "01"), |
| 1102 | rx(0x8400, 0x05, "00"), |
| 1103 | tx(0x0400, 0x06, "00"), |
| 1104 | rx(0x8400, 0x06, "00"), |
| 1105 | ]); |
| 1106 | let script = Script::new(steps); |
| 1107 | let mut session = open(&script).unwrap(); |
| 1108 | session.find(true).unwrap(); |
| 1109 | session.find(false).unwrap(); |
| 1110 | script.assert_done(); |
| 1111 | } |
| 1112 | |
| 1113 | #[test] |
| 1114 | fn find_is_not_sent_without_its_bitmap_bit() { |
| 1115 | // Bits 0-4 only: no bit 5. |
| 1116 | let script = Script::new(vec![ |
| 1117 | tx(0x0100, 0x01, ""), |
| 1118 | rx(0x8100, 0x01, "00 1F"), |
| 1119 | tx(0x0103, 0x02, ""), |
| 1120 | rx(0x8103, 0x02, "00 12 3C 06"), |
| 1121 | tx(0x0200, 0x03, ""), |
| 1122 | rx(0x8200, 0x03, "00 00"), |
| 1123 | ]); |
| 1124 | let result = open(&script).unwrap().find(true); |
| 1125 | script.assert_done(); |
| 1126 | assert!(matches!(result, Err(Error::Unsupported(_)))); |
| 1127 | } |
| 1128 | |
| 1129 | /// The owner's gesture table (HW1) and the same table with the left triple tap on volume up. |
| 1130 | const HW1_TABLE: &str = "00 06 01 01 02 01 01 01 03 06 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08"; |
| 1131 | const LEFT_VOLUME_UP: &str = "06 01 01 02 01 01 01 03 0B 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08"; |
| 1132 | |
| 1133 | #[test] |
| 1134 | fn a_touch_dry_run_reads_the_table_and_sends_nothing() { |
| 1135 | let mut steps = handshake(); |
| 1136 | steps.extend([tx(0x0108, 0x05, ""), rx(0x8108, 0x05, HW1_TABLE)]); |
| 1137 | let script = Script::new(steps); |
| 1138 | let change = open(&script) |
| 1139 | .unwrap() |
| 1140 | .set_touch("left", "triple-tap", "volume-up", true) |
| 1141 | .unwrap(); |
| 1142 | script.assert_done(); |
| 1143 | assert!(!change.sent); |
| 1144 | let write = change.write.unwrap(); |
| 1145 | assert_eq!((write.command, write.payload), (0x0401, hex(LEFT_VOLUME_UP))); |
| 1146 | assert_eq!( |
| 1147 | change.changes, |
| 1148 | [GestureChange { |
| 1149 | side: "left".to_owned(), |
| 1150 | gesture: "triple-tap".to_owned(), |
| 1151 | from: "next".to_owned(), |
| 1152 | to: "volume-up".to_owned(), |
| 1153 | }] |
| 1154 | ); |
| 1155 | let left_triple = change.gestures.get(1).unwrap(); |
| 1156 | assert_eq!(left_triple.action, "volume-up"); |
| 1157 | } |
| 1158 | |
| 1159 | #[test] |
| 1160 | fn sets_a_gesture_and_reads_the_table_back() { |
| 1161 | let mut steps = handshake(); |
| 1162 | steps.extend([ |
| 1163 | tx(0x0108, 0x05, ""), |
| 1164 | rx(0x8108, 0x05, HW1_TABLE), |
| 1165 | tx(0x0401, 0x06, LEFT_VOLUME_UP), |
| 1166 | // The owner's ack (W8): 00, then the old table cut to the write's length. |
| 1167 | rx( |
| 1168 | 0x8401, |
| 1169 | 0x06, |
| 1170 | "00 06 01 01 02 01 01 01 03 06 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04", |
| 1171 | ), |
| 1172 | tx(0x0108, 0x07, ""), |
| 1173 | rx(0x8108, 0x07, &format!("00 {LEFT_VOLUME_UP}")), |
| 1174 | ]); |
| 1175 | let script = Script::new(steps); |
| 1176 | let change = open(&script) |
| 1177 | .unwrap() |
| 1178 | .set_touch("left", "triple-tap", "volume-up", false) |
| 1179 | .unwrap(); |
| 1180 | script.assert_done(); |
| 1181 | assert!(change.sent); |
| 1182 | assert_eq!(change.changes.len(), 1); |
| 1183 | assert_eq!(change.gestures.get(1).unwrap().action, "volume-up"); |
| 1184 | } |
| 1185 | |
| 1186 | #[test] |
| 1187 | fn a_gesture_that_already_has_the_action_is_not_written() { |
| 1188 | let mut steps = handshake(); |
| 1189 | steps.extend([tx(0x0108, 0x05, ""), rx(0x8108, 0x05, HW1_TABLE)]); |
| 1190 | let script = Script::new(steps); |
| 1191 | let change = open(&script) |
| 1192 | .unwrap() |
| 1193 | .set_touch("both", "hold", "noise-cycle", false) |
| 1194 | .unwrap(); |
| 1195 | script.assert_done(); |
| 1196 | assert!(change.changes.is_empty() && change.write.is_none() && !change.sent); |
| 1197 | } |
| 1198 | |
| 1199 | #[test] |
| 1200 | fn a_bad_touch_action_is_refused_before_anything_is_sent() { |
| 1201 | let mut steps = handshake(); |
| 1202 | steps.pop(); |
| 1203 | let script = Script::new(steps); |
| 1204 | let result = open(&script) |
| 1205 | .unwrap() |
| 1206 | .set_touch("left", "double-tap", "volume-up", false); |
| 1207 | script.assert_done(); |
| 1208 | assert!(matches!(result, Err(Error::Usage(_)))); |
| 1209 | } |
| 1210 | |
| 1211 | #[test] |
| 1212 | fn sets_the_hold_cycle_and_reads_it_back() { |
| 1213 | let mut steps = handshake(); |
| 1214 | steps.extend([ |
| 1215 | tx(0x0404, 0x05, "02 01 0B"), |
| 1216 | rx(0x8404, 0x05, "00"), |
| 1217 | tx(0x010C, 0x06, "02 01"), |
| 1218 | rx(0x810C, 0x06, "00 02 01 0B"), |
| 1219 | ]); |
| 1220 | let script = Script::new(steps); |
| 1221 | let now = open(&script) |
| 1222 | .unwrap() |
| 1223 | .set_hold_cycle(&["off", "transparency", "anc"]) |
| 1224 | .unwrap(); |
| 1225 | script.assert_done(); |
| 1226 | assert_eq!(now, ["off", "transparency", "anc"]); |
| 1227 | } |
| 1228 | |
| 1229 | #[test] |
| 1230 | fn a_one_mode_hold_cycle_is_refused_before_anything_is_sent() { |
| 1231 | let mut steps = handshake(); |
| 1232 | steps.pop(); |
| 1233 | let script = Script::new(steps); |
| 1234 | let result = open(&script).unwrap().set_hold_cycle(&["anc"]); |
| 1235 | script.assert_done(); |
| 1236 | assert!(matches!(result, Err(Error::Usage(_)))); |
| 1237 | } |
| 1238 | |
| 1239 | /// The custom EQ list of the owner's T310 (W11a): one flat preset, "Custom1", id 04. |
| 1240 | const OWNER_CUSTOM_EQS: &str = |
| 1241 | "00 01 01 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1242 | |
| 1243 | #[test] |
| 1244 | fn lists_built_in_and_custom_eq_presets() { |
| 1245 | let mut steps = handshake(); |
| 1246 | steps.extend([ |
| 1247 | tx(0x010F, 0x05, ""), |
| 1248 | rx(0x810F, 0x05, "00 04"), |
| 1249 | tx(0x0122, 0x06, ""), |
| 1250 | // The owner's T310 (W11a). |
| 1251 | rx(0x8122, 0x06, OWNER_CUSTOM_EQS), |
| 1252 | ]); |
| 1253 | let script = Script::new(steps); |
| 1254 | let eq = open(&script).unwrap().eq_presets().unwrap(); |
| 1255 | script.assert_done(); |
| 1256 | assert_eq!(eq.current.as_deref(), Some("custom-4")); |
| 1257 | let names: Vec<(&str, bool)> = eq.presets.iter().map(|p| (p.name.as_str(), p.custom)).collect(); |
| 1258 | assert_eq!( |
| 1259 | names, |
| 1260 | [ |
| 1261 | ("pure-raw", false), |
| 1262 | ("deep-bass", false), |
| 1263 | ("pure-vocals", false), |
| 1264 | ("pure-bass", false), |
| 1265 | ("Custom1", true) |
| 1266 | ] |
| 1267 | ); |
| 1268 | let bands: Vec<u16> = eq.presets.last().unwrap().bands.iter().map(|b| b.hz).collect(); |
| 1269 | assert_eq!(bands, [50, 250, 1000, 4000, 8000, 16000]); |
| 1270 | assert!(eq.warnings.is_empty()); |
| 1271 | } |
| 1272 | |
| 1273 | #[test] |
| 1274 | fn sets_the_bass_level() { |
| 1275 | let mut steps = handshake(); |
| 1276 | steps.extend([tx(0x041B, 0x05, "FB 05 FE"), rx(0x841B, 0x05, "00")]); |
| 1277 | let script = Script::new(steps); |
| 1278 | let mut session = open(&script).unwrap(); |
| 1279 | assert_eq!(session.bass_range(), Some((-5, 5))); |
| 1280 | session.set_bass_level(-2).unwrap(); |
| 1281 | script.assert_done(); |
| 1282 | } |
| 1283 | |
| 1284 | #[test] |
| 1285 | fn a_bass_level_out_of_range_is_refused_before_anything_is_sent() { |
| 1286 | let mut steps = handshake(); |
| 1287 | steps.pop(); |
| 1288 | let script = Script::new(steps); |
| 1289 | let result = open(&script).unwrap().set_bass_level(6); |
| 1290 | script.assert_done(); |
| 1291 | assert!(matches!(result, Err(Error::Usage(_)))); |
| 1292 | } |
| 1293 | |
| 1294 | #[test] |
| 1295 | fn creates_a_custom_preset_and_finds_it_in_the_list() { |
| 1296 | const LIST: &str = |
| 1297 | "00 01 01 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1298 | const AFTER: &str = "00 02 01 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00 \ |
| 1299 | 00 FA 06 05 04 54 65 73 74 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1300 | let mut steps = handshake(); |
| 1301 | steps.extend([ |
| 1302 | tx(0x0122, 0x05, ""), |
| 1303 | rx(0x8122, 0x05, LIST), |
| 1304 | tx( |
| 1305 | 0x0418, |
| 1306 | 0x06, |
| 1307 | "01 FA 06 00 04 54 65 73 74 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00", |
| 1308 | ), |
| 1309 | rx(0x8418, 0x06, "00 05"), |
| 1310 | tx(0x0122, 0x07, ""), |
| 1311 | rx(0x8122, 0x07, AFTER), |
| 1312 | ]); |
| 1313 | let script = Script::new(steps); |
| 1314 | let created = open(&script).unwrap().create_custom_eq("Test").unwrap(); |
| 1315 | script.assert_done(); |
| 1316 | assert_eq!((created.id, created.name.as_str()), (5, "Test")); |
| 1317 | assert_eq!(created.bands.len(), 6); |
| 1318 | } |
| 1319 | |
| 1320 | #[test] |
| 1321 | fn renames_a_custom_preset_and_reads_it_back() { |
| 1322 | const LIST: &str = "00 02 00 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 06 FA 00 03 E8 03 03 A0 0F 04 40 1F 06 80 3E 06 \ |
| 1323 | 01 FA 06 05 04 54 65 73 74 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1324 | const AFTER: &str = "00 02 00 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 06 FA 00 03 E8 03 03 A0 0F 04 40 1F 06 80 3E 06 \ |
| 1325 | 01 FA 06 05 03 47 79 6D 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1326 | let mut steps = handshake(); |
| 1327 | steps.extend([ |
| 1328 | tx(0x0122, 0x05, ""), |
| 1329 | rx(0x8122, 0x05, LIST), |
| 1330 | tx( |
| 1331 | 0x0418, |
| 1332 | 0x06, |
| 1333 | "02 FA 06 05 03 47 79 6D 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00", |
| 1334 | ), |
| 1335 | rx(0x8418, 0x06, "00 05"), |
| 1336 | tx(0x0122, 0x07, ""), |
| 1337 | rx(0x8122, 0x07, AFTER), |
| 1338 | ]); |
| 1339 | let script = Script::new(steps); |
| 1340 | let now = open(&script).unwrap().rename_custom_eq("custom-5", "Gym").unwrap(); |
| 1341 | script.assert_done(); |
| 1342 | assert_eq!((now.id, now.name.as_str()), (5, "Gym")); |
| 1343 | |
| 1344 | // Another preset's name is refused before anything is written. |
| 1345 | let mut steps = handshake(); |
| 1346 | steps.extend([tx(0x0122, 0x05, ""), rx(0x8122, 0x05, LIST)]); |
| 1347 | let script = Script::new(steps); |
| 1348 | let taken = open(&script).unwrap().rename_custom_eq("custom-5", "Custom1"); |
| 1349 | script.assert_done(); |
| 1350 | assert!(matches!(taken, Err(Error::Usage(_)))); |
| 1351 | } |
| 1352 | |
| 1353 | #[test] |
| 1354 | fn refuses_a_fourth_preset_or_a_taken_name_before_writing() { |
| 1355 | let one = "00 FA 06 04 07 43 75 73 74 6F 6D 31 00"; |
| 1356 | for (list, name) in [ |
| 1357 | (format!("00 03 {one} {one} {one}"), "Test"), |
| 1358 | (format!("00 01 {one}"), "Custom1"), |
| 1359 | ("00 00".to_owned(), "Test"), |
| 1360 | ] { |
| 1361 | let mut steps = handshake(); |
| 1362 | steps.extend([tx(0x0122, 0x05, ""), rx(0x8122, 0x05, &list)]); |
| 1363 | let script = Script::new(steps); |
| 1364 | let result = open(&script).unwrap().create_custom_eq(name); |
| 1365 | script.assert_done(); |
| 1366 | assert!(matches!(result, Err(Error::Usage(_))), "{list}"); |
| 1367 | } |
| 1368 | } |
| 1369 | |
| 1370 | #[test] |
| 1371 | fn retunes_a_custom_preset_and_reads_it_back() { |
| 1372 | let tuned = |
| 1373 | "00 01 01 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 03 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1374 | let mut steps = handshake(); |
| 1375 | steps.extend([ |
| 1376 | tx(0x0122, 0x05, ""), |
| 1377 | rx(0x8122, 0x05, OWNER_CUSTOM_EQS), |
| 1378 | tx( |
| 1379 | 0x0418, |
| 1380 | 0x06, |
| 1381 | "02 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 03 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00", |
| 1382 | ), |
| 1383 | rx(0x8418, 0x06, "00 04"), |
| 1384 | tx(0x0122, 0x07, ""), |
| 1385 | rx(0x8122, 0x07, tuned), |
| 1386 | ]); |
| 1387 | let script = Script::new(steps); |
| 1388 | let now = open(&script) |
| 1389 | .unwrap() |
| 1390 | .set_custom_eq("custom-4", &[EqBand { hz: 50, gain: 3 }]) |
| 1391 | .unwrap(); |
| 1392 | script.assert_done(); |
| 1393 | assert_eq!((now.name.as_str(), now.id), ("Custom1", 4)); |
| 1394 | assert_eq!(now.bands.first(), Some(&EqBand { hz: 50, gain: 3 })); |
| 1395 | } |
| 1396 | |
| 1397 | #[test] |
| 1398 | fn eq_custom_selects_by_saving_the_preset_unchanged() { |
| 1399 | let saved = "02 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1400 | let mut steps = handshake(); |
| 1401 | steps.extend([ |
| 1402 | tx(0x0122, 0x05, ""), |
| 1403 | rx(0x8122, 0x05, OWNER_CUSTOM_EQS), |
| 1404 | tx(0x0418, 0x06, saved), |
| 1405 | rx(0x8418, 0x06, "00 04"), |
| 1406 | tx(0x0122, 0x07, ""), |
| 1407 | rx(0x8122, 0x07, OWNER_CUSTOM_EQS), |
| 1408 | ]); |
| 1409 | let script = Script::new(steps); |
| 1410 | let now = open(&script).unwrap().set_eq("custom-4").unwrap(); |
| 1411 | script.assert_done(); |
| 1412 | assert_eq!(now, "custom-4"); |
| 1413 | } |
| 1414 | |
| 1415 | #[test] |
| 1416 | fn a_custom_preset_the_buds_lack_is_never_written() { |
| 1417 | let mut steps = handshake(); |
| 1418 | steps.extend([tx(0x0122, 0x05, ""), rx(0x8122, 0x05, OWNER_CUSTOM_EQS)]); |
| 1419 | let script = Script::new(steps); |
| 1420 | let result = open(&script) |
| 1421 | .unwrap() |
| 1422 | .set_custom_eq("custom-5", &[EqBand { hz: 50, gain: 3 }]); |
| 1423 | script.assert_done(); |
| 1424 | match result { |
| 1425 | Err(Error::Usage(message)) => assert!(message.ends_with("custom-4")), |
| 1426 | other => panic!("expected a usage error, got {other:?}"), |
| 1427 | } |
| 1428 | } |
| 1429 | } |