| 1 | //! realme Buds T310 commands, tables and pure decoders. No I/O here, so every function can be |
| 2 | //! tested with bytes from the spec. Each constant cites docs/protocol/realme_t310.md. |
| 3 | |
| 4 | use crate::error::{Error, Result}; |
| 5 | use crate::reader::Reader; |
| 6 | use crate::status::{AncLevel, Battery, Charge, EqBand, EqPreset, Gesture, NoiseControl, NoiseMode, Switch}; |
| 7 | |
| 8 | /// Spec: realme_t310.md#bitmap |
| 9 | pub(super) const HANDSHAKE: u16 = 0x0100; |
| 10 | /// Spec: realme_t310.md#identity |
| 11 | pub(super) const PRODUCT_ID: u16 = 0x0103; |
| 12 | /// Spec: realme_t310.md#firmware |
| 13 | pub(super) const FIRMWARE: u16 = 0x0105; |
| 14 | /// Spec: realme_t310.md#battery |
| 15 | pub(super) const BATTERY: u16 = 0x0106; |
| 16 | /// Spec: realme_t310.md#gestures |
| 17 | pub(super) const GESTURES: u16 = 0x0108; |
| 18 | /// Spec: realme_t310.md#anc-read |
| 19 | pub(super) const NOISE_CONTROL: u16 = 0x010C; |
| 20 | /// Spec: realme_t310.md#switches |
| 21 | pub(super) const SWITCHES: u16 = 0x010D; |
| 22 | /// Spec: realme_t310.md#anc-write |
| 23 | pub(super) const NOISE_CONTROL_WRITE: u16 = 0x0404; |
| 24 | /// Spec: realme_t310.md#switch-write |
| 25 | pub(super) const SWITCH_WRITE: u16 = 0x0403; |
| 26 | /// Spec: realme_t310.md#eq-write |
| 27 | pub(super) const EQ_SELECT: u16 = 0x0406; |
| 28 | /// Spec: realme_t310.md#find |
| 29 | pub(super) const FIND: u16 = 0x0400; |
| 30 | /// Spec: realme_t310.md#bass-write |
| 31 | pub(super) const BASS_LEVEL_WRITE: u16 = 0x041B; |
| 32 | /// The bass-level range. Spec: realme_t310.md#bass-write |
| 33 | pub(super) const BASS_RANGE: (i8, i8) = (-5, 5); |
| 34 | |
| 35 | /// `FB 05 <level s8>`: the range bytes, then the level. Spec: realme_t310.md#bass-write |
| 36 | pub(super) fn bass_write_payload(level: i8) -> Result<[u8; 3]> { |
| 37 | let (min, max) = BASS_RANGE; |
| 38 | if !(min..=max).contains(&level) { |
| 39 | return Err(Error::Usage(format!( |
| 40 | "the bass level goes from {min} to +{max}; {level} is outside" |
| 41 | ))); |
| 42 | } |
| 43 | let [min, max, level] = [min, max, level].map(|v| v.to_le_bytes()[0]); |
| 44 | Ok([min, max, level]) |
| 45 | } |
| 46 | /// Spec: realme_t310.md#gesture-write |
| 47 | pub(super) const GESTURE_WRITE: u16 = 0x0401; |
| 48 | |
| 49 | /// `01` starts ringing, `00` stops it. Spec: realme_t310.md#find |
| 50 | pub(super) fn find_payload(ring: bool) -> [u8; 1] { |
| 51 | [u8::from(ring)] |
| 52 | } |
| 53 | /// Spec: realme_t310.md#eq-read |
| 54 | pub(super) const EQ_PRESET: u16 = 0x010F; |
| 55 | /// Spec: realme_t310.md#codec |
| 56 | pub(super) const CODEC: u16 = 0x0114; |
| 57 | /// Spec: realme_t310.md#custom-eq |
| 58 | pub(super) const CUSTOM_EQ_LIST: u16 = 0x0122; |
| 59 | /// Spec: realme_t310.md#custom-eq |
| 60 | pub(super) const CUSTOM_EQ_WRITE: u16 = 0x0418; |
| 61 | /// The `0x0418` action that saves a whole preset and selects it. Spec: realme_t310.md#custom-eq |
| 62 | const CUSTOM_EQ_SAVE: u8 = 0x02; |
| 63 | /// Spec: realme_t310.md#events-offered |
| 64 | pub(super) const EVENTS_OFFERED: u16 = 0x0200; |
| 65 | /// Spec: realme_t310.md#subscribe |
| 66 | pub(super) const SUBSCRIBE: u16 = 0x0205; |
| 67 | /// Spec: realme_t310.md#fit-test |
| 68 | pub(super) const FIT_TEST: u16 = 0x0405; |
| 69 | |
| 70 | /// Spec: realme_t310.md#identity |
| 71 | pub(super) const T310_PRODUCT_ID: u32 = 0x06_3C_12; |
| 72 | |
| 73 | /// Payload asking for the current noise-control mode. Spec: realme_t310.md#anc-read |
| 74 | pub(super) const NOISE_MODE_QUERY: [u8; 2] = [0x01, 0x01]; |
| 75 | /// Payload asking for the hold's noise-control cycle (one setting for both buds). |
| 76 | /// Spec: realme_t310.md#hold-cycle |
| 77 | pub(super) const HOLD_CYCLE_QUERY: [u8; 2] = [0x02, 0x01]; |
| 78 | /// Count, then the T310's switch ids: `05 06 11 1A 1B 1D`. Spec: realme_t310.md#switches |
| 79 | pub(super) const SWITCH_QUERY: [u8; 7] = [6, 0x05, 0x06, 0x11, 0x1A, 0x1B, 0x1D]; |
| 80 | |
| 81 | /// Event codes to subscribe to; the optional ones only when their command is allowed. |
| 82 | /// Spec: realme_t310.md#subscribe |
| 83 | const EVENTS: [(u8, Option<u16>); 4] = [(0x01, None), (0x02, None), (0x03, None), (0x04, Some(FIT_TEST))]; |
| 84 | |
| 85 | /// Spec: realme_t310.md#switches |
| 86 | const SWITCH_NAMES: [(u8, &str, &str); 5] = [ |
| 87 | (0x06, "game", "Game mode"), |
| 88 | (0x11, "dual", "Dual connection"), |
| 89 | (0x1A, "wind", "Wind-noise reduction"), |
| 90 | (0x1B, "spatial", "3D sound"), |
| 91 | (0x1D, "bass-boost", "Bass boost"), |
| 92 | ]; |
| 93 | |
| 94 | /// Noise-control masks: mode and level. Spec: realme_t310.md#anc-read |
| 95 | const NOISE_MODES: [(u32, &str, Option<&str>); 5] = [ |
| 96 | (0x01, "off", None), |
| 97 | (0x02, "transparency", None), |
| 98 | (0x04, "anc", Some("light")), |
| 99 | (0x08, "anc", Some("deep")), |
| 100 | (0x10, "anc", Some("medium")), |
| 101 | ]; |
| 102 | |
| 103 | /// Bits of the hold cycle. Spec: realme_t310.md#hold-cycle |
| 104 | const CYCLE_MODES: [(u32, &str); 3] = [(0x01, "off"), (0x02, "transparency"), (0x08, "anc")]; |
| 105 | |
| 106 | /// Built-in EQ presets by id. Spec: realme_t310.md#eq-read |
| 107 | const EQ_PRESETS: [(u8, &str); 4] = [ |
| 108 | (0x00, "pure-raw"), |
| 109 | (0x01, "deep-bass"), |
| 110 | (0x02, "pure-vocals"), |
| 111 | (0x03, "pure-bass"), |
| 112 | ]; |
| 113 | |
| 114 | /// Spec: realme_t310.md#codec |
| 115 | const CODECS: [(u8, &str); 8] = [ |
| 116 | (0x01, "SBC"), |
| 117 | (0x02, "AAC"), |
| 118 | (0x03, "LDAC"), |
| 119 | (0x04, "aptX"), |
| 120 | (0x05, "aptX HD"), |
| 121 | (0x06, "aptX Adaptive"), |
| 122 | (0x07, "LHDC"), |
| 123 | (0x08, "LHDC V5"), |
| 124 | ]; |
| 125 | |
| 126 | /// Gesture-table names. Spec: realme_t310.md#gestures |
| 127 | const SIDES: [(u8, &str); 3] = [(0x01, "left"), (0x02, "right"), (0x04, "both")]; |
| 128 | /// Spec: realme_t310.md#gestures |
| 129 | const MAIN_GROUP: u8 = 0x01; |
| 130 | /// Spec: realme_t310.md#gestures |
| 131 | const ACTS: [(u8, &str); 6] = [ |
| 132 | (0x01, "single-tap"), |
| 133 | (0x02, "double-tap"), |
| 134 | (0x03, "triple-tap"), |
| 135 | (0x04, "hold"), |
| 136 | (0x05, "slide"), |
| 137 | (0x06, "long-hold"), |
| 138 | ]; |
| 139 | /// Spec: realme_t310.md#gestures |
| 140 | const FUNCTIONS: [(u8, &str); 15] = [ |
| 141 | (0x00, "none"), |
| 142 | (0x01, "play-pause"), |
| 143 | (0x03, "voice-assistant"), |
| 144 | (0x05, "previous"), |
| 145 | (0x06, "next"), |
| 146 | (0x07, "volume"), |
| 147 | (0x08, "noise-cycle"), |
| 148 | (0x09, "favourite-music"), |
| 149 | (0x0A, "switch-track"), |
| 150 | (0x0B, "volume-up"), |
| 151 | (0x0C, "volume-down"), |
| 152 | (0x0D, "switch-devices"), |
| 153 | (0x11, "game-mode"), |
| 154 | (0x1C, "decline-call"), |
| 155 | (0x1D, "answer-call"), |
| 156 | ]; |
| 157 | |
| 158 | fn name_of<K: PartialEq + Copy>(table: &[(K, &'static str)], key: K) -> Option<&'static str> { |
| 159 | table.iter().find(|(k, _)| *k == key).map(|(_, name)| *name) |
| 160 | } |
| 161 | |
| 162 | /// When a command may be sent. Spec: realme_t310.md#bitmap |
| 163 | enum Gate { |
| 164 | Always, |
| 165 | Bit(u8), |
| 166 | } |
| 167 | |
| 168 | /// The gate of every command budctl uses. An unlisted command is never sent. |
| 169 | /// Spec: realme_t310.md#bitmap |
| 170 | fn gate(cmd: u16) -> Option<Gate> { |
| 171 | Some(match cmd { |
| 172 | 0x0100..=0x0104 | 0x0106 | 0x010B | 0x010D | 0x0200 => Gate::Always, |
| 173 | 0x0105 => Gate::Bit(0), |
| 174 | 0x0108 | 0x0401 => Gate::Bit(3), |
| 175 | 0x0109 => Gate::Bit(4), |
| 176 | 0x0400 => Gate::Bit(5), |
| 177 | 0x0403 => Gate::Bit(7), |
| 178 | 0x010C | 0x0404 => Gate::Bit(8), |
| 179 | 0x0405 => Gate::Bit(9), |
| 180 | 0x010F | 0x0406 => Gate::Bit(10), |
| 181 | 0x0114 => Gate::Bit(17), |
| 182 | 0x0205 => Gate::Bit(22), |
| 183 | 0x0122 | 0x0418 => Gate::Bit(34), |
| 184 | 0x0124 | 0x041B => Gate::Bit(38), |
| 185 | _ => return None, |
| 186 | }) |
| 187 | } |
| 188 | |
| 189 | /// The commands these buds accept, from the handshake reply. Spec: realme_t310.md#bitmap |
| 190 | #[derive(Debug)] |
| 191 | pub(super) struct Commands { |
| 192 | bitmap: Vec<u8>, |
| 193 | } |
| 194 | |
| 195 | impl Commands { |
| 196 | pub(super) fn parse(reply: &[u8]) -> Result<Self> { |
| 197 | let mut r = ok_reply(reply, "the handshake")?; |
| 198 | Ok(Self { |
| 199 | bitmap: r.rest().to_vec(), |
| 200 | }) |
| 201 | } |
| 202 | |
| 203 | pub(super) fn allows(&self, cmd: u16) -> bool { |
| 204 | match gate(cmd) { |
| 205 | Some(Gate::Always) => true, |
| 206 | Some(Gate::Bit(n)) => self |
| 207 | .bitmap |
| 208 | .get(usize::from(n / 8)) |
| 209 | .is_some_and(|byte| byte & (1 << (n % 8)) != 0), |
| 210 | None => false, |
| 211 | } |
| 212 | } |
| 213 | } |
| 214 | |
| 215 | /// A reply whose status byte is `00`, positioned after it. Spec: realme_t310.md#seq |
| 216 | fn ok_reply<'a>(reply: &'a [u8], what: &'static str) -> Result<Reader<'a>> { |
| 217 | let mut r = Reader::new(reply, what); |
| 218 | match r.u8()? { |
| 219 | 0x00 => Ok(r), |
| 220 | status => Err(Error::Rejected { |
| 221 | what: what.to_owned(), |
| 222 | status, |
| 223 | }), |
| 224 | } |
| 225 | } |
| 226 | |
| 227 | /// Spec: realme_t310.md#identity |
| 228 | pub(super) fn decode_product_id(reply: &[u8]) -> Result<u32> { |
| 229 | let mut r = ok_reply(reply, "the product id query")?; |
| 230 | let [low, middle, high] = [r.u8()?, r.u8()?, r.u8()?]; |
| 231 | Ok(u32::from_le_bytes([low, middle, high, 0])) |
| 232 | } |
| 233 | |
| 234 | /// Spec: realme_t310.md#events-offered |
| 235 | pub(super) fn decode_events_offered(reply: &[u8]) -> Result<Vec<u8>> { |
| 236 | let mut r = ok_reply(reply, "the event list")?; |
| 237 | let count = r.u8()?; |
| 238 | Ok(r.take(usize::from(count))?.to_vec()) |
| 239 | } |
| 240 | |
| 241 | /// The subscribe payload: count, then the wanted codes the buds offer. |
| 242 | /// Spec: realme_t310.md#subscribe |
| 243 | pub(super) fn subscribe_payload(offered: &[u8], commands: &Commands) -> Vec<u8> { |
| 244 | let codes: Vec<u8> = EVENTS |
| 245 | .iter() |
| 246 | .filter(|(code, needs)| offered.contains(code) && needs.is_none_or(|cmd| commands.allows(cmd))) |
| 247 | .map(|(code, _)| *code) |
| 248 | .collect(); |
| 249 | let mut payload = vec![u8::try_from(codes.len()).unwrap_or_default()]; |
| 250 | payload.extend(codes); |
| 251 | payload |
| 252 | } |
| 253 | |
| 254 | /// Spec: realme_t310.md#battery |
| 255 | pub(super) fn decode_battery(reply: &[u8]) -> Result<Battery> { |
| 256 | let mut r = ok_reply(reply, "the battery reply")?; |
| 257 | let mut battery = Battery::default(); |
| 258 | for _ in 0..r.u8()? { |
| 259 | let part = r.u8()?; |
| 260 | let raw = r.u8()?; |
| 261 | let level = raw & 0x7F; |
| 262 | if level == 0 { |
| 263 | continue; // not known |
| 264 | } |
| 265 | let charge = Some(Charge { |
| 266 | level, |
| 267 | charging: raw & 0x80 != 0, |
| 268 | }); |
| 269 | match part { |
| 270 | 0x01 => battery.left = charge, |
| 271 | 0x02 => battery.right = charge, |
| 272 | 0x03 => battery.case = charge, |
| 273 | _ => {} |
| 274 | } |
| 275 | } |
| 276 | Ok(battery) |
| 277 | } |
| 278 | |
| 279 | /// The versions of kind 2: plain numbers are joined with dots; full dotted versions (the T310's) |
| 280 | /// are shown once each, joined with ` / `. The raw text when there are none. |
| 281 | /// Spec: realme_t310.md#firmware |
| 282 | pub(super) fn decode_firmware(reply: &[u8]) -> Result<String> { |
| 283 | let mut r = ok_reply(reply, "the firmware reply")?; |
| 284 | let _count = r.u8()?; |
| 285 | let text = String::from_utf8_lossy(r.rest()).into_owned(); |
| 286 | let fields: Vec<&str> = text.split(',').map(str::trim).collect(); |
| 287 | let mut versions: Vec<&str> = fields |
| 288 | .chunks(3) |
| 289 | .filter_map(|triple| match triple { |
| 290 | [_device, "2", version] => Some(*version), |
| 291 | _ => None, |
| 292 | }) |
| 293 | .collect(); |
| 294 | if versions.is_empty() { |
| 295 | return Ok(text); |
| 296 | } |
| 297 | if !versions.iter().any(|v| v.contains('.')) { |
| 298 | return Ok(versions.join(".")); |
| 299 | } |
| 300 | let mut seen = Vec::new(); |
| 301 | versions.retain(|v| { |
| 302 | let new = !seen.contains(v); |
| 303 | seen.push(*v); |
| 304 | new |
| 305 | }); |
| 306 | Ok(versions.join(" / ")) |
| 307 | } |
| 308 | |
| 309 | /// Spec: realme_t310.md#codec |
| 310 | pub(super) fn decode_codec(reply: &[u8]) -> Result<String> { |
| 311 | let codec = ok_reply(reply, "the codec reply")?.u8()?; |
| 312 | Ok(name_of(&CODECS, codec).map_or_else(|| format!("unknown (0x{codec:02X})"), str::to_owned)) |
| 313 | } |
| 314 | |
| 315 | /// Spec: realme_t310.md#anc-read |
| 316 | pub(super) fn decode_noise_mode(reply: &[u8]) -> Result<NoiseControl> { |
| 317 | let mask = noise_mask(reply, NOISE_MODE_QUERY, "the noise-control reply")?; |
| 318 | Ok(match NOISE_MODES.iter().find(|(m, _, _)| *m == mask) { |
| 319 | Some((_, mode, level)) => NoiseControl { |
| 320 | mode: (*mode).to_owned(), |
| 321 | level: level.map(str::to_owned), |
| 322 | }, |
| 323 | None => NoiseControl { |
| 324 | mode: format!("unknown (0x{mask:02X})"), |
| 325 | level: None, |
| 326 | }, |
| 327 | }) |
| 328 | } |
| 329 | |
| 330 | /// The mask that selects `mode`, as written and as read back. Spec: realme_t310.md#anc-write |
| 331 | pub(super) fn noise_write_mask(mode: NoiseMode) -> u32 { |
| 332 | match mode { |
| 333 | NoiseMode::Off => 0x01, |
| 334 | NoiseMode::Transparency => 0x02, |
| 335 | NoiseMode::Anc(AncLevel::Light) => 0x04, |
| 336 | NoiseMode::Anc(AncLevel::Medium) => 0x10, |
| 337 | // Also plain "noise cancelling on". |
| 338 | NoiseMode::Anc(AncLevel::Deep) => 0x08, |
| 339 | } |
| 340 | } |
| 341 | |
| 342 | /// `01 01 <mask>`: the noise-mode kind, then the mask in the fewest bytes (all fit in one). |
| 343 | /// Spec: realme_t310.md#anc-write |
| 344 | pub(super) fn noise_write_payload(mode: NoiseMode) -> Vec<u8> { |
| 345 | let mut payload = NOISE_MODE_QUERY.to_vec(); |
| 346 | payload.extend(fewest_bytes(noise_write_mask(mode))); |
| 347 | payload |
| 348 | } |
| 349 | |
| 350 | /// A mask in the fewest little-endian bytes that hold it, at least one. |
| 351 | /// Spec: realme_t310.md#anc-write, #hold-cycle-write |
| 352 | fn fewest_bytes(mask: u32) -> Vec<u8> { |
| 353 | let bytes = mask.to_le_bytes(); |
| 354 | let used = bytes.iter().rposition(|&b| b != 0).map_or(1, |last| last + 1); |
| 355 | bytes.iter().take(used).copied().collect() |
| 356 | } |
| 357 | |
| 358 | /// The mask in a noise-control read reply. Spec: realme_t310.md#anc-read |
| 359 | pub(super) fn decode_noise_mask(reply: &[u8]) -> Result<u32> { |
| 360 | noise_mask(reply, NOISE_MODE_QUERY, "the noise-control reply") |
| 361 | } |
| 362 | |
| 363 | /// A write reply: `00` means accepted. Spec: realme_t310.md#writes |
| 364 | pub(super) fn check_write_reply(reply: &[u8], what: &'static str) -> Result<()> { |
| 365 | ok_reply(reply, what).map(|_| ()) |
| 366 | } |
| 367 | |
| 368 | /// Spec: realme_t310.md#hold-cycle |
| 369 | pub(super) fn decode_hold_cycle(reply: &[u8]) -> Result<Vec<String>> { |
| 370 | let mask = decode_hold_cycle_mask(reply)?; |
| 371 | let mut modes: Vec<String> = CYCLE_MODES |
| 372 | .iter() |
| 373 | .filter(|(bit, _)| mask & bit != 0) |
| 374 | .map(|(_, name)| (*name).to_owned()) |
| 375 | .collect(); |
| 376 | let known = CYCLE_MODES.iter().fold(0, |all, (bit, _)| all | bit); |
| 377 | if mask & !known != 0 { |
| 378 | modes.push(format!("unknown (0x{:02X})", mask & !known)); |
| 379 | } |
| 380 | Ok(modes) |
| 381 | } |
| 382 | |
| 383 | /// The mask for a hold cycle through `modes` (`off`, `transparency`, `anc`): at least two, |
| 384 | /// none twice. The buds keep their own order, so the order given does not matter. |
| 385 | /// Spec: realme_t310.md#hold-cycle-write |
| 386 | pub(super) fn hold_cycle_mask(modes: &[&str]) -> Result<u32> { |
| 387 | let mut mask = 0; |
| 388 | for &mode in modes { |
| 389 | let Some(&(bit, _)) = CYCLE_MODES.iter().find(|(_, name)| *name == mode) else { |
| 390 | let names: Vec<&str> = CYCLE_MODES.iter().map(|(_, name)| *name).collect(); |
| 391 | return Err(Error::Usage(format!( |
| 392 | "no mode called {mode} in the hold cycle; use: {}", |
| 393 | names.join(", ") |
| 394 | ))); |
| 395 | }; |
| 396 | if mask & bit != 0 { |
| 397 | return Err(Error::Usage(format!("{mode} is in the hold cycle twice"))); |
| 398 | } |
| 399 | mask |= bit; |
| 400 | } |
| 401 | if mask.count_ones() < 2 { |
| 402 | return Err(Error::Usage("the hold cycle needs at least two modes".to_owned())); |
| 403 | } |
| 404 | Ok(mask) |
| 405 | } |
| 406 | |
| 407 | /// `02 01 <mask>`, the mask in the fewest bytes. Spec: realme_t310.md#hold-cycle-write |
| 408 | pub(super) fn hold_cycle_write_payload(mask: u32) -> Vec<u8> { |
| 409 | let mut payload = HOLD_CYCLE_QUERY.to_vec(); |
| 410 | payload.extend(fewest_bytes(mask)); |
| 411 | payload |
| 412 | } |
| 413 | |
| 414 | /// The mask in a hold-cycle read reply. Spec: realme_t310.md#hold-cycle |
| 415 | pub(super) fn decode_hold_cycle_mask(reply: &[u8]) -> Result<u32> { |
| 416 | noise_mask(reply, HOLD_CYCLE_QUERY, "the hold-cycle reply") |
| 417 | } |
| 418 | |
| 419 | /// `00 <echo of the query> <mask, 1-4 bytes LE>`. Spec: realme_t310.md#anc-read |
| 420 | fn noise_mask(reply: &[u8], query: [u8; 2], what: &'static str) -> Result<u32> { |
| 421 | let mut r = ok_reply(reply, what)?; |
| 422 | if [r.u8()?, r.u8()?] != query { |
| 423 | return Err(Error::Protocol(format!("{what} answers a different question"))); |
| 424 | } |
| 425 | let bytes = r.rest(); |
| 426 | if bytes.is_empty() || bytes.len() > 4 { |
| 427 | return Err(Error::Protocol(format!("{what} has a {} byte value", bytes.len()))); |
| 428 | } |
| 429 | Ok(bytes.iter().rev().fold(0, |mask, &b| (mask << 8) | u32::from(b))) |
| 430 | } |
| 431 | |
| 432 | /// Spec: realme_t310.md#switches |
| 433 | pub(super) fn decode_switches(reply: &[u8]) -> Result<Vec<Switch>> { |
| 434 | let mut r = ok_reply(reply, "the switch reply")?; |
| 435 | let mut switches = Vec::new(); |
| 436 | for _ in 0..r.u8()? { |
| 437 | let id = r.u8()?; |
| 438 | let value = r.u8()?; |
| 439 | if let Some((_, key, label)) = SWITCH_NAMES.iter().find(|(known, _, _)| *known == id) { |
| 440 | switches.push(Switch { |
| 441 | key, |
| 442 | label, |
| 443 | on: value == 0x01, |
| 444 | }); |
| 445 | } |
| 446 | } |
| 447 | Ok(switches) |
| 448 | } |
| 449 | |
| 450 | /// The id of a switch, by its key (`game`…). Spec: realme_t310.md#switches |
| 451 | pub(super) fn switch_id(key: &str) -> Option<u8> { |
| 452 | SWITCH_NAMES.iter().find(|(_, k, _)| *k == key).map(|(id, _, _)| *id) |
| 453 | } |
| 454 | |
| 455 | /// `<id> <01|00>`. Spec: realme_t310.md#switch-write |
| 456 | pub(super) fn switch_write_payload(id: u8, on: bool) -> [u8; 2] { |
| 457 | [id, u8::from(on)] |
| 458 | } |
| 459 | |
| 460 | /// The id of a built-in EQ preset, by name. Spec: realme_t310.md#eq-read |
| 461 | pub(super) fn eq_id(name: &str) -> Option<u8> { |
| 462 | EQ_PRESETS.iter().find(|(_, n)| *n == name).map(|(id, _)| *id) |
| 463 | } |
| 464 | |
| 465 | /// The built-in EQ presets' names, in id order. Spec: realme_t310.md#eq-read |
| 466 | pub(super) fn eq_names() -> Vec<&'static str> { |
| 467 | EQ_PRESETS.iter().map(|(_, name)| *name).collect() |
| 468 | } |
| 469 | |
| 470 | /// Spec: realme_t310.md#eq-read |
| 471 | pub(super) fn decode_eq(reply: &[u8]) -> Result<String> { |
| 472 | let id = ok_reply(reply, "the EQ reply")?.u8()?; |
| 473 | Ok(name_of(&EQ_PRESETS, id).map_or_else(|| format!("custom-{id}"), str::to_owned)) |
| 474 | } |
| 475 | |
| 476 | /// The built-in EQ presets, in id order. Spec: realme_t310.md#eq-read |
| 477 | pub(super) fn builtin_eqs() -> Vec<EqPreset> { |
| 478 | EQ_PRESETS |
| 479 | .iter() |
| 480 | .map(|&(id, name)| EqPreset { |
| 481 | name: name.to_owned(), |
| 482 | id, |
| 483 | custom: false, |
| 484 | bands: Vec::new(), |
| 485 | range: None, |
| 486 | }) |
| 487 | .collect() |
| 488 | } |
| 489 | |
| 490 | /// One custom preset as the list holds it. Spec: realme_t310.md#custom-eq |
| 491 | #[derive(Debug, Clone, PartialEq, Eq)] |
| 492 | pub(super) struct CustomEq { |
| 493 | pub(super) selected: bool, |
| 494 | /// Gain range, dB. |
| 495 | pub(super) min: i8, |
| 496 | pub(super) max: i8, |
| 497 | pub(super) id: u8, |
| 498 | /// The stored name, byte for byte, so a save writes it back unchanged. |
| 499 | pub(super) name: Vec<u8>, |
| 500 | pub(super) bands: Vec<EqBand>, |
| 501 | } |
| 502 | |
| 503 | impl CustomEq { |
| 504 | pub(super) fn preset(&self) -> EqPreset { |
| 505 | EqPreset { |
| 506 | name: String::from_utf8_lossy(&self.name).into_owned(), |
| 507 | id: self.id, |
| 508 | custom: true, |
| 509 | bands: self.bands.clone(), |
| 510 | range: Some((self.min, self.max)), |
| 511 | } |
| 512 | } |
| 513 | } |
| 514 | |
| 515 | /// `00 <count>`, then per preset `<selected> <min> <max> <id> <nameLen> <name> <bands> |
| 516 | /// (<freq u16 LE> <gain s8>)…`. Spec: realme_t310.md#custom-eq |
| 517 | pub(super) fn decode_custom_eq_list(reply: &[u8]) -> Result<Vec<CustomEq>> { |
| 518 | let mut r = ok_reply(reply, "the custom EQ list")?; |
| 519 | let mut presets = Vec::new(); |
| 520 | for _ in 0..r.u8()? { |
| 521 | let selected = r.u8()? == 0x01; |
| 522 | let (min, max, id) = (r.i8()?, r.i8()?, r.u8()?); |
| 523 | let name_len = r.u8()?; |
| 524 | let name = r.take(usize::from(name_len))?.to_vec(); |
| 525 | let mut bands = Vec::new(); |
| 526 | for _ in 0..r.u8()? { |
| 527 | bands.push(EqBand { |
| 528 | hz: r.u16_le()?, |
| 529 | gain: r.i8()?, |
| 530 | }); |
| 531 | } |
| 532 | presets.push(CustomEq { |
| 533 | selected, |
| 534 | min, |
| 535 | max, |
| 536 | id, |
| 537 | name, |
| 538 | bands, |
| 539 | }); |
| 540 | } |
| 541 | Ok(presets) |
| 542 | } |
| 543 | |
| 544 | /// Spec: realme_t310.md#custom-eq |
| 545 | pub(super) fn decode_custom_eqs(reply: &[u8]) -> Result<Vec<EqPreset>> { |
| 546 | Ok(decode_custom_eq_list(reply)?.iter().map(CustomEq::preset).collect()) |
| 547 | } |
| 548 | |
| 549 | /// The id in `custom-<id>`, the name [`decode_eq`] gives a custom preset. |
| 550 | /// Spec: realme_t310.md#eq-read |
| 551 | pub(super) fn custom_eq_id(name: &str) -> Option<u8> { |
| 552 | name.strip_prefix("custom-")?.parse().ok() |
| 553 | } |
| 554 | |
| 555 | /// The preset with the given bands' gains changed, and nothing else. Every band must be one the |
| 556 | /// preset has, at most once, with a gain inside the preset's range. |
| 557 | /// Spec: realme_t310.md#custom-eq |
| 558 | pub(super) fn retune(preset: &CustomEq, changes: &[EqBand]) -> Result<CustomEq> { |
| 559 | let mut tuned = preset.clone(); |
| 560 | for (i, change) in changes.iter().enumerate() { |
| 561 | if changes.iter().take(i).any(|earlier| earlier.hz == change.hz) { |
| 562 | return Err(Error::Usage(format!("the {} Hz band is given twice", change.hz))); |
| 563 | } |
| 564 | let Some(band) = tuned.bands.iter_mut().find(|b| b.hz == change.hz) else { |
| 565 | let have: Vec<String> = preset.bands.iter().map(|b| b.hz.to_string()).collect(); |
| 566 | return Err(Error::Usage(format!( |
| 567 | "custom-{} has no {} Hz band; its bands are {} Hz", |
| 568 | preset.id, |
| 569 | change.hz, |
| 570 | have.join(", ") |
| 571 | ))); |
| 572 | }; |
| 573 | if !(preset.min..=preset.max).contains(&change.gain) { |
| 574 | return Err(Error::Usage(format!( |
| 575 | "a gain of {:+} dB is outside {:+}..{:+} dB", |
| 576 | change.gain, preset.min, preset.max |
| 577 | ))); |
| 578 | } |
| 579 | band.gain = change.gain; |
| 580 | } |
| 581 | Ok(tuned) |
| 582 | } |
| 583 | |
| 584 | /// `02 <min> <max> <id> <nameLen> <name> <bands> (<freq u16 LE> <gain s8>)…`: save the whole |
| 585 | /// preset and select it. Spec: realme_t310.md#custom-eq |
| 586 | pub(super) fn custom_eq_save_payload(preset: &CustomEq) -> Result<Vec<u8>> { |
| 587 | let too_long = |what: &str| Error::Protocol(format!("the preset's {what} does not fit in a byte")); |
| 588 | let mut payload = vec![CUSTOM_EQ_SAVE]; |
| 589 | payload.extend([preset.min.to_le_bytes()[0], preset.max.to_le_bytes()[0], preset.id]); |
| 590 | payload.push(u8::try_from(preset.name.len()).map_err(|_| too_long("name"))?); |
| 591 | payload.extend(&preset.name); |
| 592 | payload.push(u8::try_from(preset.bands.len()).map_err(|_| too_long("band count"))?); |
| 593 | for band in &preset.bands { |
| 594 | payload.extend(band.hz.to_le_bytes()); |
| 595 | payload.push(band.gain.to_le_bytes()[0]); |
| 596 | } |
| 597 | Ok(payload) |
| 598 | } |
| 599 | |
| 600 | /// One gesture-table entry: `<dev> <btn> <act> <fn>`. Spec: realme_t310.md#gestures |
| 601 | pub(super) type GestureEntry = [u8; 4]; |
| 602 | |
| 603 | /// The entries of a gesture-table reply, in the order the buds sent them. |
| 604 | /// Spec: realme_t310.md#gestures |
| 605 | pub(super) fn decode_gesture_entries(reply: &[u8]) -> Result<Vec<GestureEntry>> { |
| 606 | let mut r = ok_reply(reply, "the gesture table")?; |
| 607 | let mut entries = Vec::new(); |
| 608 | for _ in 0..r.u8()? { |
| 609 | entries.push([r.u8()?, r.u8()?, r.u8()?, r.u8()?]); |
| 610 | } |
| 611 | Ok(entries) |
| 612 | } |
| 613 | |
| 614 | /// Spec: realme_t310.md#gestures |
| 615 | pub(super) fn name_gesture(&[side, group, act, function]: &GestureEntry) -> Gesture { |
| 616 | Gesture { |
| 617 | side: name_of(&SIDES, side).map_or_else(|| format!("device-0x{side:02X}"), str::to_owned), |
| 618 | gesture: name_of(&ACTS, act).map_or_else(|| format!("act-0x{act:02X}"), str::to_owned), |
| 619 | action: name_of(&FUNCTIONS, function).map_or_else(|| format!("fn-0x{function:02X}"), str::to_owned), |
| 620 | group: (group != MAIN_GROUP).then_some(group), |
| 621 | } |
| 622 | } |
| 623 | |
| 624 | /// Spec: realme_t310.md#gestures |
| 625 | pub(super) fn decode_gestures(reply: &[u8]) -> Result<Vec<Gesture>> { |
| 626 | Ok(decode_gesture_entries(reply)?.iter().map(name_gesture).collect()) |
| 627 | } |
| 628 | |
| 629 | /// What `touch <side>` changes: `both` is the left and the right bud's entry. |
| 630 | /// Spec: realme_t310.md#gesture-choices |
| 631 | const TOUCH_SIDES: [(&str, &[u8]); 3] = [("left", &[0x01]), ("right", &[0x02]), ("both", &[0x01, 0x02])]; |
| 632 | |
| 633 | /// The actions realme Link offers per gesture on the T310, in its order. budctl offers no |
| 634 | /// others. Spec: realme_t310.md#gesture-choices |
| 635 | const TOUCH_CHOICES: [(u8, &[u8]); 3] = [ |
| 636 | // double tap: none, play/pause, next, voice assistant |
| 637 | (0x02, &[0x00, 0x01, 0x06, 0x03]), |
| 638 | // triple tap: none, previous, next, voice assistant, volume up, volume down, game mode |
| 639 | (0x03, &[0x00, 0x05, 0x06, 0x03, 0x0B, 0x0C, 0x11]), |
| 640 | // hold: none, noise-control cycle, voice assistant, game mode |
| 641 | (0x04, &[0x00, 0x08, 0x03, 0x11]), |
| 642 | ]; |
| 643 | |
| 644 | /// A checked `touch <side> <gesture> <action>`: the bud ids, the act and the fn to write. |
| 645 | #[derive(Debug, PartialEq, Eq)] |
| 646 | pub(super) struct TouchTarget { |
| 647 | pub(super) devices: &'static [u8], |
| 648 | pub(super) act: u8, |
| 649 | pub(super) function: u8, |
| 650 | } |
| 651 | |
| 652 | /// Check the names against what the T310 offers. Every failure is a usage error that lists |
| 653 | /// the valid names. Spec: realme_t310.md#gesture-choices |
| 654 | pub(super) fn touch_target(side: &str, gesture: &str, action: &str) -> Result<TouchTarget> { |
| 655 | let list = |names: Vec<&str>| names.join(", "); |
| 656 | let Some(&(_, devices)) = TOUCH_SIDES.iter().find(|(name, _)| *name == side) else { |
| 657 | return Err(Error::Usage(format!( |
| 658 | "no side called {side}; use one of: {}", |
| 659 | list(TOUCH_SIDES.iter().map(|(name, _)| *name).collect()) |
| 660 | ))); |
| 661 | }; |
| 662 | let gesture_names = || { |
| 663 | list( |
| 664 | TOUCH_CHOICES |
| 665 | .iter() |
| 666 | .filter_map(|(act, _)| name_of(&ACTS, *act)) |
| 667 | .collect(), |
| 668 | ) |
| 669 | }; |
| 670 | let Some(&(act, choices)) = TOUCH_CHOICES |
| 671 | .iter() |
| 672 | .find(|(act, _)| name_of(&ACTS, *act) == Some(gesture)) |
| 673 | else { |
| 674 | return Err(Error::Usage(format!( |
| 675 | "these buds have no {gesture} gesture to set; use one of: {}", |
| 676 | gesture_names() |
| 677 | ))); |
| 678 | }; |
| 679 | let Some(&function) = choices.iter().find(|f| name_of(&FUNCTIONS, **f) == Some(action)) else { |
| 680 | return Err(Error::Usage(format!( |
| 681 | "{gesture} cannot be set to {action} on these buds; use one of: {}", |
| 682 | list(choices.iter().filter_map(|f| name_of(&FUNCTIONS, *f)).collect()) |
| 683 | ))); |
| 684 | }; |
| 685 | Ok(TouchTarget { devices, act, function }) |
| 686 | } |
| 687 | |
| 688 | /// The table with the target's entries changed, and nothing else. Every targeted entry must |
| 689 | /// already be in the table: budctl never adds entries. Spec: realme_t310.md#gesture-write |
| 690 | pub(super) fn retarget_gestures(table: &[GestureEntry], target: &TouchTarget) -> Result<Vec<GestureEntry>> { |
| 691 | for &device in target.devices { |
| 692 | if !table |
| 693 | .iter() |
| 694 | .any(|&[d, group, act, _]| d == device && group == MAIN_GROUP && act == target.act) |
| 695 | { |
| 696 | let entry = name_gesture(&[device, MAIN_GROUP, target.act, 0]); |
| 697 | return Err(Error::Unsupported(format!( |
| 698 | "the buds report no {} {} entry, so budctl will not write one", |
| 699 | entry.side, entry.gesture |
| 700 | ))); |
| 701 | } |
| 702 | } |
| 703 | Ok(table |
| 704 | .iter() |
| 705 | .map(|&[device, group, act, function]| { |
| 706 | if target.devices.contains(&device) && group == MAIN_GROUP && act == target.act { |
| 707 | [device, group, act, target.function] |
| 708 | } else { |
| 709 | [device, group, act, function] |
| 710 | } |
| 711 | }) |
| 712 | .collect()) |
| 713 | } |
| 714 | |
| 715 | /// `<count> (<dev> <btn> <act> <fn>)…`: the whole table. Spec: realme_t310.md#gesture-write |
| 716 | pub(super) fn gesture_write_payload(table: &[GestureEntry]) -> Result<Vec<u8>> { |
| 717 | let count = u8::try_from(table.len()) |
| 718 | .map_err(|_| Error::Protocol(format!("a gesture table of {} entries does not fit", table.len())))?; |
| 719 | let mut payload = vec![count]; |
| 720 | payload.extend(table.iter().flatten()); |
| 721 | Ok(payload) |
| 722 | } |
| 723 | |
| 724 | /// The handshake reply of the owner's T310 (HW1). Spec: realme_t310.md#bitmap-t310 |
| 725 | #[cfg(test)] |
| 726 | pub(super) const T310_BITMAP_REPLY: &str = "00 BF 1F 5A 20 45 04 40 00"; |
| 727 | |
| 728 | #[cfg(test)] |
| 729 | mod tests { |
| 730 | use super::*; |
| 731 | use crate::transport::mock::hex; |
| 732 | |
| 733 | #[test] |
| 734 | fn t310_bitmap_allows_its_commands_and_nothing_else() { |
| 735 | let commands = Commands::parse(&hex(T310_BITMAP_REPLY)).unwrap(); |
| 736 | // Every gated command in the T310's logged command set (realme_t310.md#bitmap-t310). |
| 737 | for cmd in [ |
| 738 | 0x0100, 0x0103, 0x0105, 0x0106, 0x0108, 0x0109, 0x010C, 0x010D, 0x010F, 0x0114, 0x0122, 0x0124, 0x0205, |
| 739 | 0x0400, 0x0401, 0x0403, 0x0404, 0x0405, 0x0406, 0x0418, 0x041B, 0x0200, |
| 740 | ] { |
| 741 | assert!(commands.allows(cmd), "0x{cmd:04X} should be allowed"); |
| 742 | } |
| 743 | // Commands the T310 lacks, and commands budctl has no gate for. |
| 744 | for cmd in [0x012F, 0x041E, 0x0413, 0x0130, 0x0427, 0x0423, 0x012A, 0x0422, 0x9999] { |
| 745 | assert!(!commands.allows(cmd), "0x{cmd:04X} should be refused"); |
| 746 | } |
| 747 | } |
| 748 | |
| 749 | #[test] |
| 750 | fn a_short_bitmap_allows_only_the_always_commands() { |
| 751 | let commands = Commands::parse(&hex("00")).unwrap(); |
| 752 | assert!(commands.allows(BATTERY) && commands.allows(SWITCHES) && commands.allows(HANDSHAKE)); |
| 753 | assert!(!commands.allows(FIRMWARE) && !commands.allows(NOISE_CONTROL)); |
| 754 | assert!(matches!( |
| 755 | Commands::parse(&hex("01 FF")), |
| 756 | Err(Error::Rejected { status: 1, .. }) |
| 757 | )); |
| 758 | } |
| 759 | |
| 760 | #[test] |
| 761 | fn product_id_is_three_bytes_little_endian() { |
| 762 | assert_eq!(decode_product_id(&hex("00 12 3C 06")).unwrap(), T310_PRODUCT_ID); |
| 763 | assert_eq!(decode_product_id(&hex("00 14 54 06")).unwrap(), 0x06_54_14); |
| 764 | assert!(decode_product_id(&hex("00 12 3C")).is_err()); |
| 765 | } |
| 766 | |
| 767 | #[test] |
| 768 | fn subscribes_to_offered_events_only() { |
| 769 | let commands = Commands::parse(&hex(T310_BITMAP_REPLY)).unwrap(); |
| 770 | let buds4_offer = hex("00 09 01 02 03 04 08 0B F1 F2 F3"); |
| 771 | let offered = decode_events_offered(&buds4_offer).unwrap(); |
| 772 | assert_eq!(subscribe_payload(&offered, &commands), hex("04 01 02 03 04")); |
| 773 | assert_eq!(subscribe_payload(&[0x02, 0x01], &commands), hex("02 01 02")); |
| 774 | let no_fit_test = Commands::parse(&hex("00 BD 0D")).unwrap(); |
| 775 | assert_eq!(subscribe_payload(&offered, &no_fit_test), hex("03 01 02 03")); |
| 776 | } |
| 777 | |
| 778 | #[test] |
| 779 | fn battery_levels_charging_and_unknown_parts() { |
| 780 | let battery = decode_battery(&hex("00 03 01 64 02 E4 03 00")).unwrap(); |
| 781 | assert_eq!( |
| 782 | battery.left, |
| 783 | Some(Charge { |
| 784 | level: 100, |
| 785 | charging: false |
| 786 | }) |
| 787 | ); |
| 788 | assert_eq!( |
| 789 | battery.right, |
| 790 | Some(Charge { |
| 791 | level: 100, |
| 792 | charging: true |
| 793 | }) |
| 794 | ); |
| 795 | assert_eq!(battery.case, None); |
| 796 | assert_eq!(decode_battery(&hex("00 00")).unwrap(), Battery::default()); |
| 797 | assert!(decode_battery(&hex("00 03 01 64")).is_err()); |
| 798 | } |
| 799 | |
| 800 | #[test] |
| 801 | fn firmware_shows_kind_two_versions() { |
| 802 | let mut reply = hex("00 04"); |
| 803 | reply.extend(b"1,2,138,2,2,138,3,1,01,3,2,105"); |
| 804 | assert_eq!(decode_firmware(&reply).unwrap(), "138.138.105"); |
| 805 | // The owner's T310 (HW1): both buds report the same full version. |
| 806 | let mut t310 = hex("00 02"); |
| 807 | t310.extend(b"1,2,1.1.0.43,2,2,1.1.0.43"); |
| 808 | assert_eq!(decode_firmware(&t310).unwrap(), "1.1.0.43"); |
| 809 | let mut differ = hex("00 02"); |
| 810 | differ.extend(b"1,2,1.1.0.43,2,2,1.1.0.44"); |
| 811 | assert_eq!(decode_firmware(&differ).unwrap(), "1.1.0.43 / 1.1.0.44"); |
| 812 | let mut odd = hex("00 01"); |
| 813 | odd.extend(b"V1.0.2"); |
| 814 | assert_eq!(decode_firmware(&odd).unwrap(), "V1.0.2"); |
| 815 | } |
| 816 | |
| 817 | #[test] |
| 818 | fn noise_control_modes() { |
| 819 | let mode = |reply: &str| decode_noise_mode(&hex(reply)).unwrap(); |
| 820 | assert_eq!(mode("00 01 01 01").mode, "off"); |
| 821 | assert_eq!(mode("00 01 01 02 00").mode, "transparency"); |
| 822 | let deep = mode("00 01 01 08"); |
| 823 | assert_eq!((deep.mode.as_str(), deep.level.as_deref()), ("anc", Some("deep"))); |
| 824 | assert_eq!(mode("00 01 01 10").level.as_deref(), Some("medium")); |
| 825 | assert_eq!(mode("00 01 01 00 08").mode, "unknown (0x800)"); |
| 826 | assert!(decode_noise_mode(&hex("00 02 01 08")).is_err()); |
| 827 | assert!(decode_noise_mode(&hex("00 01 01")).is_err()); |
| 828 | assert!(matches!( |
| 829 | decode_noise_mode(&hex("0E 01 01 08")), |
| 830 | Err(Error::Rejected { status: 0x0E, .. }) |
| 831 | )); |
| 832 | } |
| 833 | |
| 834 | #[test] |
| 835 | fn noise_control_write_payloads() { |
| 836 | assert_eq!(noise_write_payload(NoiseMode::Off), hex("01 01 01")); |
| 837 | assert_eq!(noise_write_payload(NoiseMode::Transparency), hex("01 01 02")); |
| 838 | assert_eq!(noise_write_payload(NoiseMode::Anc(AncLevel::Light)), hex("01 01 04")); |
| 839 | assert_eq!(noise_write_payload(NoiseMode::Anc(AncLevel::Medium)), hex("01 01 10")); |
| 840 | assert_eq!(noise_write_payload(NoiseMode::Anc(AncLevel::Deep)), hex("01 01 08")); |
| 841 | // What is written is what a read reports: every write mask decodes to its own mode. |
| 842 | for level in [AncLevel::Light, AncLevel::Medium, AncLevel::Deep] { |
| 843 | let mut reply = hex("00 01 01"); |
| 844 | reply.extend(noise_write_payload(NoiseMode::Anc(level)).iter().skip(2)); |
| 845 | let read = decode_noise_mode(&reply).unwrap(); |
| 846 | assert_eq!((read.mode.as_str(), read.level.as_deref()), ("anc", Some(level.name()))); |
| 847 | } |
| 848 | // The family's documented frame for "off" (realme_t310.md#frame-whole). |
| 849 | let frame = |
| 850 | crate::devices::realme_t310::frame::encode(NOISE_CONTROL_WRITE, 0x06, &noise_write_payload(NoiseMode::Off)) |
| 851 | .unwrap(); |
| 852 | assert_eq!(frame, hex("AA 0A 00 00 04 04 06 03 00 01 01 01")); |
| 853 | } |
| 854 | |
| 855 | #[test] |
| 856 | fn switch_writes() { |
| 857 | assert_eq!(switch_id("game"), Some(0x06)); |
| 858 | assert_eq!(switch_id("dual"), Some(0x11)); |
| 859 | assert_eq!(switch_id("turbo"), None); |
| 860 | assert_eq!(switch_write_payload(0x06, true), [0x06, 0x01]); |
| 861 | assert_eq!(switch_write_payload(0x06, false), [0x06, 0x00]); |
| 862 | } |
| 863 | |
| 864 | #[test] |
| 865 | fn eq_presets_by_name() { |
| 866 | assert_eq!(eq_id("pure-raw"), Some(0x00)); |
| 867 | assert_eq!(eq_id("pure-bass"), Some(0x03)); |
| 868 | assert_eq!(eq_id("custom-7"), None); |
| 869 | assert_eq!(eq_names(), ["pure-raw", "deep-bass", "pure-vocals", "pure-bass"]); |
| 870 | // Every preset reads back under the name it was selected by. |
| 871 | for name in eq_names() { |
| 872 | let reply = [0x00, eq_id(name).unwrap()]; |
| 873 | assert_eq!(decode_eq(&reply).unwrap(), name); |
| 874 | } |
| 875 | } |
| 876 | |
| 877 | #[test] |
| 878 | fn find_payloads() { |
| 879 | assert_eq!(find_payload(true), [0x01]); |
| 880 | assert_eq!(find_payload(false), [0x00]); |
| 881 | } |
| 882 | |
| 883 | #[test] |
| 884 | fn write_replies() { |
| 885 | assert!(check_write_reply(&hex("00"), "the write").is_ok()); |
| 886 | assert!(matches!( |
| 887 | check_write_reply(&hex("0E"), "the write"), |
| 888 | Err(Error::Rejected { status: 0x0E, .. }) |
| 889 | )); |
| 890 | assert!(check_write_reply(&[], "the write").is_err()); |
| 891 | } |
| 892 | |
| 893 | #[test] |
| 894 | fn hold_cycle_lists_modes() { |
| 895 | assert_eq!(decode_hold_cycle(&hex("00 02 01 0A")).unwrap(), ["transparency", "anc"]); |
| 896 | assert_eq!( |
| 897 | decode_hold_cycle(&hex("00 02 01 0B 00")).unwrap(), |
| 898 | ["off", "transparency", "anc"] |
| 899 | ); |
| 900 | assert_eq!(decode_hold_cycle(&hex("00 02 01 14")).unwrap(), ["unknown (0x14)"]); |
| 901 | } |
| 902 | |
| 903 | #[test] |
| 904 | fn switches_from_report_22_values() { |
| 905 | let switches = decode_switches(&hex("00 06 05 00 06 00 11 01 1A 00 1B 01 1D 01")).unwrap(); |
| 906 | let on: Vec<(&str, bool)> = switches.iter().map(|s| (s.key, s.on)).collect(); |
| 907 | assert_eq!( |
| 908 | on, |
| 909 | [ |
| 910 | ("game", false), |
| 911 | ("dual", true), |
| 912 | ("wind", false), |
| 913 | ("spatial", true), |
| 914 | ("bass-boost", true) |
| 915 | ] |
| 916 | ); |
| 917 | assert!(decode_switches(&hex("00 02 06 01")).is_err()); |
| 918 | } |
| 919 | |
| 920 | #[test] |
| 921 | fn eq_and_codec() { |
| 922 | assert_eq!(decode_eq(&hex("00 00")).unwrap(), "pure-raw"); |
| 923 | assert_eq!(decode_eq(&hex("00 03")).unwrap(), "pure-bass"); |
| 924 | assert_eq!(decode_eq(&hex("00 05")).unwrap(), "custom-5"); |
| 925 | assert_eq!(decode_codec(&hex("00 02")).unwrap(), "AAC"); |
| 926 | assert_eq!(decode_codec(&hex("00 09")).unwrap(), "unknown (0x09)"); |
| 927 | } |
| 928 | |
| 929 | #[test] |
| 930 | fn gesture_table_names_known_values() { |
| 931 | let gestures = decode_gestures(&hex("00 03 01 01 02 01 02 01 04 08 04 06 02 1D")).unwrap(); |
| 932 | let rows: Vec<(&str, &str, &str, Option<u8>)> = gestures |
| 933 | .iter() |
| 934 | .map(|g| (g.side.as_str(), g.gesture.as_str(), g.action.as_str(), g.group)) |
| 935 | .collect(); |
| 936 | assert_eq!( |
| 937 | rows, |
| 938 | [ |
| 939 | ("left", "double-tap", "play-pause", None), |
| 940 | ("right", "hold", "noise-cycle", None), |
| 941 | ("both", "double-tap", "answer-call", Some(6)), |
| 942 | ] |
| 943 | ); |
| 944 | let odd = decode_gestures(&hex("00 01 09 01 07 42")).unwrap(); |
| 945 | assert_eq!(odd.first().map(|g| g.action.as_str()), Some("fn-0x42")); |
| 946 | assert!(decode_gestures(&hex("00 02 01 01 02 01")).is_err()); |
| 947 | } |
| 948 | |
| 949 | /// The owner's table (HW1): per bud, double tap play/pause, triple tap next, hold cycle. |
| 950 | const HW1_GESTURES: &str = "00 06 01 01 02 01 01 01 03 06 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08"; |
| 951 | |
| 952 | #[test] |
| 953 | fn touch_targets_follow_the_t310_choices() { |
| 954 | assert_eq!( |
| 955 | touch_target("left", "triple-tap", "volume-up").unwrap(), |
| 956 | TouchTarget { |
| 957 | devices: &[0x01], |
| 958 | act: 0x03, |
| 959 | function: 0x0B |
| 960 | } |
| 961 | ); |
| 962 | assert_eq!(touch_target("both", "hold", "none").unwrap().devices, [0x01, 0x02]); |
| 963 | let usage = |side, gesture, action| match touch_target(side, gesture, action) { |
| 964 | Err(Error::Usage(message)) => message, |
| 965 | other => panic!("expected a usage error, got {other:?}"), |
| 966 | }; |
| 967 | assert!(usage("middle", "hold", "none").contains("left, right, both")); |
| 968 | assert!(usage("left", "single-tap", "none").contains("double-tap, triple-tap, hold")); |
| 969 | // Offered by the family, but not by realme Link for this gesture. |
| 970 | assert!(usage("left", "double-tap", "volume-up").contains("none, play-pause, next, voice-assistant")); |
| 971 | assert!(usage("left", "hold", "previous").contains("none, noise-cycle, voice-assistant, game-mode")); |
| 972 | } |
| 973 | |
| 974 | #[test] |
| 975 | fn retargeting_changes_only_the_targeted_entries() { |
| 976 | let table = decode_gesture_entries(&hex(HW1_GESTURES)).unwrap(); |
| 977 | let left = touch_target("left", "triple-tap", "volume-up").unwrap(); |
| 978 | let payload = gesture_write_payload(&retarget_gestures(&table, &left).unwrap()).unwrap(); |
| 979 | assert_eq!( |
| 980 | payload, |
| 981 | hex("06 01 01 02 01 01 01 03 0B 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08") |
| 982 | ); |
| 983 | // The frame the spec gives for this change (realme_t310.md#gesture-write). |
| 984 | let frame = crate::devices::realme_t310::frame::encode(GESTURE_WRITE, 0x06, &payload).unwrap(); |
| 985 | assert_eq!( |
| 986 | crate::debug::hex(&frame), |
| 987 | "AA 20 00 00 01 04 06 19 00 06 01 01 02 01 01 01 03 0B 01 01 04 08 02 01 02 01 02 01 03 06 02 01 04 08" |
| 988 | ); |
| 989 | let both = touch_target("both", "hold", "game-mode").unwrap(); |
| 990 | let payload = gesture_write_payload(&retarget_gestures(&table, &both).unwrap()).unwrap(); |
| 991 | assert_eq!( |
| 992 | payload, |
| 993 | hex("06 01 01 02 01 01 01 03 06 01 01 04 11 02 01 02 01 02 01 03 06 02 01 04 11") |
| 994 | ); |
| 995 | // Unchanged, the payload is the reply without its status byte. |
| 996 | let same = touch_target("right", "double-tap", "play-pause").unwrap(); |
| 997 | let payload = gesture_write_payload(&retarget_gestures(&table, &same).unwrap()).unwrap(); |
| 998 | assert_eq!(payload, hex(HW1_GESTURES).get(1..).unwrap()); |
| 999 | } |
| 1000 | |
| 1001 | #[test] |
| 1002 | fn entries_the_buds_did_not_report_are_never_written() { |
| 1003 | // Only the left bud's entries. |
| 1004 | let table = decode_gesture_entries(&hex("00 03 01 01 02 01 01 01 03 06 01 01 04 08")).unwrap(); |
| 1005 | let both = touch_target("both", "hold", "none").unwrap(); |
| 1006 | assert!(matches!(retarget_gestures(&table, &both), Err(Error::Unsupported(_)))); |
| 1007 | // An on-call row (group 06) is not a main-group entry. |
| 1008 | let table = decode_gesture_entries(&hex("00 01 01 06 02 1D")).unwrap(); |
| 1009 | let left = touch_target("left", "double-tap", "none").unwrap(); |
| 1010 | assert!(matches!(retarget_gestures(&table, &left), Err(Error::Unsupported(_)))); |
| 1011 | } |
| 1012 | |
| 1013 | #[test] |
| 1014 | fn hold_cycle_writes() { |
| 1015 | assert_eq!(hold_cycle_mask(&["transparency", "anc"]).unwrap(), 0x0A); |
| 1016 | assert_eq!(hold_cycle_mask(&["anc", "off", "transparency"]).unwrap(), 0x0B); |
| 1017 | assert_eq!(hold_cycle_write_payload(0x0B), hex("02 01 0B")); |
| 1018 | assert_eq!(hold_cycle_write_payload(0x09), hex("02 01 09")); |
| 1019 | let usage = |modes: &[&str]| matches!(hold_cycle_mask(modes), Err(Error::Usage(_))); |
| 1020 | assert!(usage(&["anc"])); |
| 1021 | assert!(usage(&[])); |
| 1022 | assert!(usage(&["anc", "anc"])); |
| 1023 | assert!(usage(&["anc", "deep"])); |
| 1024 | // What is written reads back as the same modes. |
| 1025 | let mut reply = hex("00"); |
| 1026 | reply.extend(hold_cycle_write_payload(0x0B)); |
| 1027 | assert_eq!(decode_hold_cycle_mask(&reply).unwrap(), 0x0B); |
| 1028 | assert_eq!(decode_hold_cycle(&reply).unwrap(), ["off", "transparency", "anc"]); |
| 1029 | // The frame the spec gives (realme_t310.md#hold-cycle-write). |
| 1030 | let frame = |
| 1031 | crate::devices::realme_t310::frame::encode(NOISE_CONTROL_WRITE, 0x06, &hold_cycle_write_payload(0x0B)) |
| 1032 | .unwrap(); |
| 1033 | assert_eq!(crate::debug::hex(&frame), "AA 0A 00 00 04 04 06 03 00 02 01 0B"); |
| 1034 | } |
| 1035 | |
| 1036 | #[test] |
| 1037 | fn custom_eq_list() { |
| 1038 | assert!(decode_custom_eqs(&hex("00 00")).unwrap().is_empty()); |
| 1039 | // One preset "Me", selected, range FA 06, two bands: 62 Hz +3, 16 kHz -2. |
| 1040 | let reply = hex("00 01 01 FA 06 04 02 4D 65 02 3E 00 03 80 3E FE"); |
| 1041 | let presets = decode_custom_eqs(&reply).unwrap(); |
| 1042 | assert_eq!( |
| 1043 | presets, |
| 1044 | [EqPreset { |
| 1045 | name: "Me".to_owned(), |
| 1046 | id: 0x04, |
| 1047 | custom: true, |
| 1048 | bands: vec![EqBand { hz: 62, gain: 3 }, EqBand { hz: 16000, gain: -2 }], |
| 1049 | range: Some((-6, 6)), |
| 1050 | }] |
| 1051 | ); |
| 1052 | // Cut short inside the bands. |
| 1053 | assert!(decode_custom_eqs(&hex("00 01 01 FA 06 04 02 4D 65 02 3E 00")).is_err()); |
| 1054 | assert_eq!(builtin_eqs().len(), 4); |
| 1055 | } |
| 1056 | |
| 1057 | #[test] |
| 1058 | fn bass_level_payloads() { |
| 1059 | assert_eq!(bass_write_payload(0).unwrap(), [0xFB, 0x05, 0x00]); |
| 1060 | assert_eq!(bass_write_payload(5).unwrap(), [0xFB, 0x05, 0x05]); |
| 1061 | assert_eq!(bass_write_payload(-2).unwrap(), [0xFB, 0x05, 0xFE]); |
| 1062 | assert_eq!(bass_write_payload(-5).unwrap(), [0xFB, 0x05, 0xFB]); |
| 1063 | assert!(matches!(bass_write_payload(6), Err(Error::Usage(_)))); |
| 1064 | assert!(matches!(bass_write_payload(-6), Err(Error::Usage(_)))); |
| 1065 | // The frame the spec gives (realme_t310.md#bass-write). |
| 1066 | let frame = crate::devices::realme_t310::frame::encode(BASS_LEVEL_WRITE, 0x05, &bass_write_payload(3).unwrap()) |
| 1067 | .unwrap(); |
| 1068 | assert_eq!(crate::debug::hex(&frame), "AA 0A 00 00 1B 04 05 03 00 FB 05 03"); |
| 1069 | } |
| 1070 | |
| 1071 | /// The owner's custom EQ list (W11a): "Custom1", id 04, 6 flat bands from 50 Hz. |
| 1072 | const OWNER_CUSTOM_EQS: &str = |
| 1073 | "00 01 01 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00"; |
| 1074 | |
| 1075 | #[test] |
| 1076 | fn retunes_the_owners_custom_preset() { |
| 1077 | let list = decode_custom_eq_list(&hex(OWNER_CUSTOM_EQS)).unwrap(); |
| 1078 | let custom1 = list.first().unwrap(); |
| 1079 | assert!(custom1.selected); |
| 1080 | assert_eq!((custom1.min, custom1.max, custom1.id), (-6, 6, 4)); |
| 1081 | assert_eq!(custom_eq_id("custom-4"), Some(4)); |
| 1082 | assert_eq!(custom_eq_id("pure-bass"), None); |
| 1083 | assert_eq!(custom_eq_id("custom-x"), None); |
| 1084 | |
| 1085 | // Unchanged, the save carries the preset as listed. |
| 1086 | assert_eq!( |
| 1087 | custom_eq_save_payload(&retune(custom1, &[]).unwrap()).unwrap(), |
| 1088 | hex("02 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 00 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E 00") |
| 1089 | ); |
| 1090 | let tuned = retune(custom1, &[EqBand { hz: 50, gain: 3 }, EqBand { hz: 16000, gain: -2 }]).unwrap(); |
| 1091 | let payload = custom_eq_save_payload(&tuned).unwrap(); |
| 1092 | assert_eq!( |
| 1093 | payload, |
| 1094 | hex("02 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 03 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E FE") |
| 1095 | ); |
| 1096 | // The frame the spec gives (realme_t310.md#custom-eq). |
| 1097 | let frame = crate::devices::realme_t310::frame::encode(CUSTOM_EQ_WRITE, 0x06, &payload).unwrap(); |
| 1098 | assert_eq!( |
| 1099 | crate::debug::hex(&frame), |
| 1100 | "AA 26 00 00 18 04 06 1F 00 02 FA 06 04 07 43 75 73 74 6F 6D 31 06 32 00 03 FA 00 00 E8 03 00 A0 0F 00 40 1F 00 80 3E FE" |
| 1101 | ); |
| 1102 | |
| 1103 | let usage = |changes: &[EqBand]| matches!(retune(custom1, changes), Err(Error::Usage(_))); |
| 1104 | assert!(usage(&[EqBand { hz: 62, gain: 1 }])); |
| 1105 | assert!(usage(&[EqBand { hz: 50, gain: 7 }])); |
| 1106 | assert!(usage(&[EqBand { hz: 50, gain: -7 }])); |
| 1107 | assert!(usage(&[EqBand { hz: 50, gain: 1 }, EqBand { hz: 50, gain: 2 }])); |
| 1108 | } |
| 1109 | } |