add BLE jammer, move NRF activities into submenu

firmware/menu.cpp

@@ -11,14 +11,16 @@
 #include "device_check.h"
 #include "blemouse.h"
 #include "sysinfo.h"
+#include "BleMouse.h"
 
 // ================= MENU DATA =================
+extern BleMouse bleMouse;
 
 // Root menu
 const char *mainMenuItems[] = {
     "BadUSB",
     "RF Capture",
-    "NRF Jammer",
+    "NRF Tools",
     "BLE Scan",
     "Wifi Scan",
     "Wifi Analyzer",
@@ -30,13 +32,18 @@ const char *mainMenuItems[] = {
 
 Menu mainMenu = {mainMenuItems, sizeof(mainMenuItems) / sizeof(mainMenuItems[0])};
 
-// BadUSB submenu
-//const char *badusbItems[] = {
-//    "Demo",
-//    "Open CMD",
-//    "Rickroll"};
 
-  const char *badusbItems[] = {"DEMO",
+// NRF Tools menu
+const char *nrfToolsItems[] = {
+    "BLE Jammer",
+    "Bluetooth Jammer"
+};
+
+Menu nrfToolsMenu = {nrfToolsItems, sizeof(nrfToolsItems) / sizeof(nrfToolsItems[0])};
+
+
+// BadUSB submenu
+const char *badusbItems[] = {"DEMO",
                              "KEYBOARD",
                              "HID SCRIPT",
                              "Open Notepad",
@@ -157,9 +164,15 @@ void launchFeature()
             printCapture();
             break;
             case 2:
-                startNRFJammer();
+                // startNRFJammer();
+                //startBleJammer();
+                //startBluetoothJammer();
+                currentMenu = &nrfToolsMenu;
+                menuIndex = 0;
+                menuOffset = 0;
                 break;
 
+                break;
             case 3:
                 ble_scan();
                 ble_drawMenu();
@@ -221,6 +234,8 @@ void launchFeature()
                  ESP.restart();
                 break;
             case 9:
+                  // Begin Ble mouse
+                  bleMouse.begin();
                   ble_mouse_run();
                     break;
         }
@@ -228,6 +243,8 @@ void launchFeature()
     else if (currentMenu == &badusbMenu)
     {
         badUSBMenu(menuIndex);
+    } else if (currentMenu == &nrfToolsMenu) {
+        NRFToolsMenu(menuIndex);
     }
 
     insideFeature = false;

firmware/nrf24.cpp

@@ -9,91 +9,161 @@ extern SPIClass *RADIO_SPI;
 extern RF24 radio1;
 extern RF24 radio2;
 
+const byte bleChannels[] = {2, 26, 80};
+
+const byte bluetoothChannels[] = {
+    32, 34, 46, 48, 50, 52,
+    0, 1, 2, 4, 6, 8,
+    22, 24, 26, 28, 30,
+    74, 76, 78, 80
+};
+
 void initNRF(RF24 &radio)
 {
-    radio.begin(RADIO_SPI);
+    if (!radio.begin(RADIO_SPI)) {
+        Serial.println("NRF not found");
+        return;
+    }
 
     radio.setAutoAck(false);
     radio.stopListening();
-
     radio.setRetries(0, 0);
+    radio.setPALevel(RF24_PA_MAX);
     radio.setDataRate(RF24_2MBPS);
-radio.setPALevel(RF24_PA_MAX);
-
     radio.openWritingPipe(0xE7E7E7E7E7LL);
+    Serial.println("NRF Initialized");
+
 }
 
 
-void jamChannels(const char* label, int startCh, int endCh) {
-  byte data1[32], data2[32];
-  for (int i = 0; i < 32; i++) {
-    data1[i] = random(0, 256);
-    data2[i] = random(0, 256);
-  }
 
-  for (int ch = startCh; ch <= endCh; ch++) {
-    // Status screen
-    u8g2.clearBuffer();
-    u8g2.drawStr(0, 10, "Jamming:");
-    u8g2.setCursor(60, 10);
-    u8g2.print(label);
-    u8g2.setCursor(0, 30);
-    u8g2.print("Channel: ");
-    u8g2.print(ch);
-    u8g2.sendBuffer();
+//void startBleJammer() {
+//    initNRF(radio1);
+//    initNRF(radio2);
+//
+//    Serial.println("NRF JAMMER STARTED");
+//
+//    const char payload[] = "xxxxxxxxxxxxxxxx";
+//
+//    u8g2.clearBuffer();
+//    u8g2.drawStr(0, 10, "Jamming:");
+//    u8g2.setCursor(60, 10);
+//    u8g2.print("Bluetooth");
+//    u8g2.sendBuffer();
+//
+//    while(true) {
+//
+//    // Channels (you can change this set)
+//    const byte channels[] = {2, 26, 80};
+//
+//
+//    for (int i = 0; i < sizeof(channels); i++) {
+//        radio1.setChannel(channels[i]);
+//        radio1.write(&payload, sizeof(payload));
+//        //radio2.setChannel(channels[i]);
+//        //radio2.write(&payload, sizeof(payload));
+//    }
+//
+//     if (btnBack())
+//    {
+//        Serial.println("Jammer stopped");
+//        return;
+//    }
+//    }
+//
+//}
+//
+//void startBluetoothJammer()
+//{
+//    initNRF(radio1);
+//    initNRF(radio2);
+//
+//    Serial.println("NRF JAMMER STARTED");
+//
+//    const char payload[] = "xxxxxxxxxxxxxxxx";
+//
+//    u8g2.clearBuffer();
+//    u8g2.drawStr(0, 10, "Jamming:");
+//    u8g2.setCursor(60, 10);
+//    u8g2.print("Bluetooth");
+//    u8g2.sendBuffer();
+//
+//    while(true) {
+//
+//    // Channels (you can change this set)
+//    const byte channels[] = {32, 34, 46, 48, 50, 52, 0, 1, 2, 4, 6, 8, 22, 24, 26, 28, 30, 74, 76, 78, 80};
+//
+//
+//    for (int i = 0; i < sizeof(channels); i++) {
+//        radio1.setChannel(channels[i]);
+//        radio1.write(&payload, sizeof(payload));
+//        //radio2.setChannel(channels[i]);
+//        //radio2.write(&payload, sizeof(payload));
+//    }
+//
+//     if (btnBack())
+//    {
+//        Serial.println("Jammer stopped");
+//        return;
+//    }
+//    }
+//}
 
-    unsigned long startTime = millis();
-    while (millis() - startTime < JAM_DURATION) {
-      radio1.setChannel(ch);
-      radio1.stopListening();
-      radio1.write(data1, sizeof(data1));
-      delayMicroseconds(100);
-
-      radio2.setChannel(ch);
-      radio2.stopListening();
-      radio2.write(data2, sizeof(data2));
-      delayMicroseconds(100);
-
-  }
-}
-}
-
-
-void nrfJammerSweep()
-{
-    static uint8_t ch1 = 0;
-    static uint8_t ch2 = 124;
-
-    uint8_t payload[32] = {0xFF};
-
-    radio1.setChannel(ch1);
-    radio1.writeFast(payload, sizeof(payload));
-
-    radio2.setChannel(ch2);
-    radio2.writeFast(payload, sizeof(payload));
-
-    ch1++;
-    ch2--;
-
-    if (ch1 > 124) ch1 = 0;
-    if (ch2 > 124) ch2 = 124;
-}
-
-void startNRFJammer()
+void startJammer(const char* name, const byte* channels, size_t channelCount)
 {
     initNRF(radio1);
     initNRF(radio2);
 
     Serial.println("NRF JAMMER STARTED");
-    // nrfJammerSweep();
-      jamChannels("Bluetooth", 0, 78);
 
+    const char payload[] = "xxxxxxxxxxxxxxxx";
 
-    if (btnBack())
+    u8g2.clearBuffer();
+    u8g2.drawStr(0, 10, "Jamming:");
+    u8g2.setCursor(60, 10);
+    u8g2.print(name);
+    u8g2.sendBuffer();
+
+    while (true)
     {
-        Serial.println("Jammer stopped");
-        return;
-    }
+        for (size_t i = 0; i < channelCount; i++)
+        {
+            radio1.setChannel(channels[i]);
+            radio1.write(&payload, sizeof(payload));
 
-    delayMicroseconds(200);
+            // Optional second NRF
+            // radio2.setChannel(channels[i]);
+            // radio2.write(&payload, sizeof(payload));
+        }
+
+        if (btnBack())
+        {
+            Serial.println("Jammer stopped");
+            return;
+        }
+    }
+}
+
+void NRFToolsMenu(int index) {
+    switch (index) {
+        case 0:
+            // startBleJammer();
+            // BLE
+            startJammer(
+                "BLE",
+                bleChannels,
+                sizeof(bleChannels)
+            );
+
+            break;
+        case 1:
+            // startBluetoothJammer();
+            // Bluetooth
+            startJammer(
+                "Bluetooth",
+                bluetoothChannels,
+                sizeof(bluetoothChannels)
+            );
+            break;
+    }
 }

firmware/nrf24.h

@@ -5,10 +5,9 @@
 // Initialization
 void initNRF(RF24 &radio);
 
-// Jammer modes
-void startNRFJammer();        // dual-radio sweep jammer
-void stopNRFJammer();         // (optional, for future)
+void startBluetoothJammer();
+void startBleJammer();
 
-// Advanced (later)
-void nrfJammerSweep();        // internal, but can expose if needed
-void nrfSetChannel(uint8_t ch);
+void startJammer(const char* name, const byte* channels, size_t channelCount);
+
+void NRFToolsMenu(int index);