| 1 | #!/usr/bin/env bash |
| 2 | |
| 3 | set -e |
| 4 | |
| 5 | # ========= CONFIG ========= |
| 6 | PORT="/dev/ttyACM0" |
| 7 | |
| 8 | FQBN="esp32:esp32:esp32s3:\ |
| 9 | UploadSpeed=921600,\ |
| 10 | USBMode=hwcdc,\ |
| 11 | CDCOnBoot=default,\ |
| 12 | MSCOnBoot=default,\ |
| 13 | DFUOnBoot=default,\ |
| 14 | UploadMode=default,\ |
| 15 | CPUFreq=240,\ |
| 16 | FlashMode=qio,\ |
| 17 | FlashSize=16M,\ |
| 18 | PartitionScheme=fatflash,\ |
| 19 | DebugLevel=none,\ |
| 20 | PSRAM=opi,\ |
| 21 | LoopCore=1,\ |
| 22 | EventsCore=1,\ |
| 23 | EraseFlash=none,\ |
| 24 | JTAGAdapter=default,\ |
| 25 | ZigbeeMode=default" |
| 26 | |
| 27 | # ========= FLAGS ========= |
| 28 | UPLOAD=false |
| 29 | SKETCH_PATH="./firmware" |
| 30 | |
| 31 | while [[ $# -gt 0 ]]; do |
| 32 | case "$1" in |
| 33 | -u|--upload) |
| 34 | UPLOAD=true |
| 35 | shift |
| 36 | ;; |
| 37 | *) |
| 38 | SKETCH_PATH="$1" |
| 39 | shift |
| 40 | ;; |
| 41 | esac |
| 42 | done |
| 43 | |
| 44 | # ========= BUILD ========= |
| 45 | echo "Compiling sketch..." |
| 46 | |
| 47 | arduino-cli compile \ |
| 48 | --fqbn "$FQBN" \ |
| 49 | "$SKETCH_PATH" |
| 50 | |
| 51 | echo "Compile successful." |
| 52 | |
| 53 | # ========= UPLOAD ========= |
| 54 | if [ "$UPLOAD" = true ]; then |
| 55 | echo "Uploading to $PORT..." |
| 56 | |
| 57 | arduino-cli upload \ |
| 58 | -p "$PORT" \ |
| 59 | --fqbn "$FQBN" \ |
| 60 | "$SKETCH_PATH" |
| 61 | |
| 62 | echo "Upload complete." |
| 63 | fi |