remove .pio

1 files changed, 0 insertions, 91 deletions

diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/esp8266.c b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/esp8266.c
deleted file mode 100644
index 9fe0df6..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/esp8266.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// This is a mash-up of the Due show() code + insights from Michael Miller's
-// ESP8266 work for the NeoPixelBus library: github.com/Makuna/NeoPixelBus
-// Needs to be a separate .c file to enforce ICACHE_RAM_ATTR execution.
-
-#if defined(ESP8266)
-
-#include <Arduino.h>
-#ifdef ESP8266
-#include <eagle_soc.h>
-#endif
-
-static uint32_t _getCycleCount(void) __attribute__((always_inline));
-static inline uint32_t _getCycleCount(void) {
-    uint32_t ccount;
-    __asm__ __volatile__("rsr %0,ccount" : "=a"(ccount));
-    return ccount;
-}
-
-#ifdef ESP8266
-IRAM_ATTR void espShow(uint8_t pin, uint8_t *pixels, uint32_t numBytes,
-                       __attribute__((unused)) boolean is800KHz) {
-#else
-void espShow(uint8_t pin, uint8_t *pixels, uint32_t numBytes,
-             boolean is800KHz) {
-#endif
-
-#define CYCLES_800_T0H (F_CPU / 2500001) // 0.4us
-#define CYCLES_800_T1H (F_CPU / 1250001) // 0.8us
-#define CYCLES_800 (F_CPU / 800001)      // 1.25us per bit
-#define CYCLES_400_T0H (F_CPU / 2000000) // 0.5uS
-#define CYCLES_400_T1H (F_CPU / 833333)  // 1.2us
-#define CYCLES_400 (F_CPU / 400000)      // 2.5us per bit
-
-    uint8_t *p, *end, pix, mask;
-    uint32_t t, time0, time1, period, c, startTime;
-
-#ifdef ESP8266
-    uint32_t pinMask;
-    pinMask = _BV(pin);
-#endif
-
-    p = pixels;
-    end = p + numBytes;
-    pix = *p++;
-    mask = 0x80;
-    startTime = 0;
-
-#ifdef NEO_KHZ400
-    if (is800KHz) {
-#endif
-        time0 = CYCLES_800_T0H;
-        time1 = CYCLES_800_T1H;
-        period = CYCLES_800;
-#ifdef NEO_KHZ400
-    } else { // 400 KHz bitstream
-        time0 = CYCLES_400_T0H;
-        time1 = CYCLES_400_T1H;
-        period = CYCLES_400;
-    }
-#endif
-
-    for (t = time0;; t = time0) {
-        if (pix & mask)
-            t = time1; // Bit high duration
-        while (((c = _getCycleCount()) - startTime) < period)
-            ; // Wait for bit start
-#ifdef ESP8266
-        GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, pinMask); // Set high
-#else
-        gpio_set_level(pin, HIGH);
-#endif
-        startTime = c; // Save start time
-        while (((c = _getCycleCount()) - startTime) < t)
-            ; // Wait high duration
-#ifdef ESP8266
-        GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, pinMask); // Set low
-#else
-        gpio_set_level(pin, LOW);
-#endif
-        if (!(mask >>= 1)) { // Next bit/byte
-            if (p >= end)
-                break;
-            pix = *p++;
-            mask = 0x80;
-        }
-    }
-    while ((_getCycleCount() - startTime) < period)
-        ; // Wait for last bit
-}
-
-#endif // ESP8266