remove .pio

4 files changed, 0 insertions, 386 deletions

diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/.none.test.only b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/.none.test.only
deleted file mode 100644
index e69de29..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/.none.test.only
+++ /dev/null
diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/BLESerial.cpp b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/BLESerial.cpp
deleted file mode 100644
index 20d2a0c..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/BLESerial.cpp
+++ /dev/null
@@ -1,141 +0,0 @@
-#include "BLESerial.h"
-
-// #define BLE_SERIAL_DEBUG
-
-BLESerial *BLESerial::_instance = NULL;
-
-BLESerial::BLESerial(unsigned char req, unsigned char rdy, unsigned char rst)
-    : BLEPeripheral(req, rdy, rst) {
-    this->_txCount = 0;
-    this->_rxHead = this->_rxTail = 0;
-    this->_flushed = 0;
-    BLESerial::_instance = this;
-
-    addAttribute(this->_uartService);
-    addAttribute(this->_uartNameDescriptor);
-    setAdvertisedServiceUuid(this->_uartService.uuid());
-    addAttribute(this->_rxCharacteristic);
-    addAttribute(this->_rxNameDescriptor);
-    this->_rxCharacteristic.setEventHandler(BLEWritten, BLESerial::_received);
-    addAttribute(this->_txCharacteristic);
-    addAttribute(this->_txNameDescriptor);
-}
-
-void BLESerial::begin(...) {
-    BLEPeripheral::begin();
-#ifdef BLE_SERIAL_DEBUG
-    Serial.println(F("BLESerial::begin()"));
-#endif
-}
-
-void BLESerial::poll() {
-    if (millis() < this->_flushed + 100) {
-        BLEPeripheral::poll();
-    } else {
-        flush();
-    }
-}
-
-void BLESerial::end() {
-    this->_rxCharacteristic.setEventHandler(BLEWritten, NULL);
-    this->_rxHead = this->_rxTail = 0;
-    flush();
-    BLEPeripheral::disconnect();
-}
-
-int BLESerial::available(void) {
-    BLEPeripheral::poll();
-    int retval = (this->_rxHead - this->_rxTail + sizeof(this->_rxBuffer)) %
-                 sizeof(this->_rxBuffer);
-#ifdef BLE_SERIAL_DEBUG
-    Serial.print(F("BLESerial::available() = "));
-    Serial.println(retval);
-#endif
-    return retval;
-}
-
-int BLESerial::peek(void) {
-    BLEPeripheral::poll();
-    if (this->_rxTail == this->_rxHead)
-        return -1;
-    uint8_t byte = this->_rxBuffer[this->_rxTail];
-#ifdef BLE_SERIAL_DEBUG
-    Serial.print(F("BLESerial::peek() = "));
-    Serial.print((char)byte);
-    Serial.print(F(" 0x"));
-    Serial.println(byte, HEX);
-#endif
-    return byte;
-}
-
-int BLESerial::read(void) {
-    BLEPeripheral::poll();
-    if (this->_rxTail == this->_rxHead)
-        return -1;
-    this->_rxTail = (this->_rxTail + 1) % sizeof(this->_rxBuffer);
-    uint8_t byte = this->_rxBuffer[this->_rxTail];
-#ifdef BLE_SERIAL_DEBUG
-    Serial.print(F("BLESerial::read() = "));
-    Serial.print((char)byte);
-    Serial.print(F(" 0x"));
-    Serial.println(byte, HEX);
-#endif
-    return byte;
-}
-
-void BLESerial::flush(void) {
-    if (this->_txCount == 0)
-        return;
-    this->_txCharacteristic.setValue(this->_txBuffer, this->_txCount);
-    this->_flushed = millis();
-    this->_txCount = 0;
-    BLEPeripheral::poll();
-#ifdef BLE_SERIAL_DEBUG
-    Serial.println(F("BLESerial::flush()"));
-#endif
-}
-
-size_t BLESerial::write(uint8_t byte) {
-    BLEPeripheral::poll();
-    if (this->_txCharacteristic.subscribed() == false)
-        return 0;
-    this->_txBuffer[this->_txCount++] = byte;
-    if (this->_txCount == sizeof(this->_txBuffer))
-        flush();
-#ifdef BLE_SERIAL_DEBUG
-    Serial.print(F("BLESerial::write("));
-    Serial.print((char)byte);
-    Serial.print(F(" 0x"));
-    Serial.print(byte, HEX);
-    Serial.println(F(") = 1"));
-#endif
-    return 1;
-}
-
-BLESerial::operator bool() {
-    bool retval = BLEPeripheral::connected();
-#ifdef BLE_SERIAL_DEBUG
-    Serial.print(F("BLESerial::operator bool() = "));
-    Serial.println(retval);
-#endif
-    return retval;
-}
-
-void BLESerial::_received(const uint8_t *data, size_t size) {
-    for (int i = 0; i < size; i++) {
-        this->_rxHead = (this->_rxHead + 1) % sizeof(this->_rxBuffer);
-        this->_rxBuffer[this->_rxHead] = data[i];
-    }
-#ifdef BLE_SERIAL_DEBUG
-    Serial.print(F("BLESerial::received("));
-    for (int i = 0; i < size; i++)
-        Serial.print((char)data[i]);
-    Serial.println(F(")"));
-#endif
-}
-
-void BLESerial::_received(BLECentral & /*central*/,
-                          BLECharacteristic &rxCharacteristic) {
-    BLESerial::_instance->_received(rxCharacteristic.value(),
-                                    rxCharacteristic.valueLength());
-}
diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/BLESerial.h b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/BLESerial.h
deleted file mode 100644
index 950bfb0..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/BLESerial.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _BLE_SERIAL_H_
-#define _BLE_SERIAL_H_
-
-#include <Arduino.h>
-#include <BLEPeripheral.h>
-
-class BLESerial : public BLEPeripheral, public Stream {
-  public:
-    BLESerial(unsigned char req, unsigned char rdy, unsigned char rst);
-
-    void begin(...);
-    void poll();
-    void end();
-
-    virtual int available(void);
-    virtual int peek(void);
-    virtual int read(void);
-    virtual void flush(void);
-    virtual size_t write(uint8_t byte);
-    using Print::write;
-    virtual operator bool();
-
-  private:
-    unsigned long _flushed;
-    static BLESerial *_instance;
-
-    size_t _rxHead;
-    size_t _rxTail;
-    size_t _rxCount() const;
-    uint8_t _rxBuffer[BLE_ATTRIBUTE_MAX_VALUE_LENGTH];
-    size_t _txCount;
-    uint8_t _txBuffer[BLE_ATTRIBUTE_MAX_VALUE_LENGTH];
-
-    BLEService _uartService =
-        BLEService("6E400001-B5A3-F393-E0A9-E50E24DCCA9E");
-    BLEDescriptor _uartNameDescriptor = BLEDescriptor("2901", "UART");
-    BLECharacteristic _rxCharacteristic = BLECharacteristic(
-        "6E400002-B5A3-F393-E0A9-E50E24DCCA9E", BLEWriteWithoutResponse,
-        BLE_ATTRIBUTE_MAX_VALUE_LENGTH);
-    BLEDescriptor _rxNameDescriptor =
-        BLEDescriptor("2901", "RX - Receive Data (Write)");
-    BLECharacteristic _txCharacteristic =
-        BLECharacteristic("6E400003-B5A3-F393-E0A9-E50E24DCCA9E", BLENotify,
-                          BLE_ATTRIBUTE_MAX_VALUE_LENGTH);
-    BLEDescriptor _txNameDescriptor =
-        BLEDescriptor("2901", "TX - Transfer Data (Notify)");
-
-    void _received(const uint8_t *data, size_t size);
-    static void _received(BLECentral & /*central*/,
-                          BLECharacteristic &rxCharacteristic);
-};
-
-#endif
diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/StrandtestBLE.ino b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/StrandtestBLE.ino
deleted file mode 100644
index 593b35b..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/StrandtestBLE/StrandtestBLE.ino
+++ /dev/null
@@ -1,192 +0,0 @@
-/****************************************************************************
- * This example was developed by the Hackerspace San Salvador to demonstrate
- * the simultaneous use of the NeoPixel library and the Bluetooth SoftDevice.
- * To compile this example you'll need to add support for the NRF52 based
- * following the instructions at:
- *  https://github.com/sandeepmistry/arduino-nRF5
- * Or adding the following URL to the board manager URLs on Arduino preferences:
- *  https://sandeepmistry.github.io/arduino-nRF5/package_nRF5_boards_index.json
- * Then you can install the BLEPeripheral library avaiable at:
- *  https://github.com/sandeepmistry/arduino-BLEPeripheral
- * To test it, compile this example and use the UART module from the nRF
- * Toolbox App for Android. Edit the interface and send the characters
- * 'a' to 'i' to switch the animation.
- * There is a delay because this example blocks the thread of execution but
- * the change will be shown after the current animation ends. (This might
- * take a couple of seconds)
- * For more info write us at: info _at- teubi.co
- */
-#include <SPI.h>
-#include <BLEPeripheral.h>
-#include "BLESerial.h"
-#include <Adafruit_NeoPixel.h>
-
-#define PIN 15 // Pin where NeoPixels are connected
-
-// Declare our NeoPixel strip object:
-Adafruit_NeoPixel strip(64, PIN, NEO_GRB + NEO_KHZ800);
-// Argument 1 = Number of pixels in NeoPixel strip
-// Argument 2 = Arduino pin number (most are valid)
-// Argument 3 = Pixel type flags, add together as needed:
-//   NEO_KHZ800  800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
-//   NEO_KHZ400  400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
-//   NEO_GRB     Pixels are wired for GRB bitstream (most NeoPixel products)
-//   NEO_RGB     Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
-//   NEO_RGBW    Pixels are wired for RGBW bitstream (NeoPixel RGBW products)
-
-// NEOPIXEL BEST PRACTICES for most reliable operation:
-// - Add 1000 uF CAPACITOR between NeoPixel strip's + and - connections.
-// - MINIMIZE WIRING LENGTH between microcontroller board and first pixel.
-// - NeoPixel strip's DATA-IN should pass through a 300-500 OHM RESISTOR.
-// - AVOID connecting NeoPixels on a LIVE CIRCUIT. If you must, ALWAYS
-//   connect GROUND (-) first, then +, then data.
-// - When using a 3.3V microcontroller with a 5V-powered NeoPixel strip,
-//   a LOGIC-LEVEL CONVERTER on the data line is STRONGLY RECOMMENDED.
-// (Skipping these may work OK on your workbench but can fail in the field)
-
-// define pins (varies per shield/board)
-#define BLE_REQ   10
-#define BLE_RDY   2
-#define BLE_RST   9
-
-// create ble serial instance, see pinouts above
-BLESerial BLESerial(BLE_REQ, BLE_RDY, BLE_RST);
-
-uint8_t current_state = 0;
-uint8_t rgb_values[3];
-
-void setup() {
-  Serial.begin(115200);
-  Serial.println("Hello World!");
-  // custom services and characteristics can be added as well
-  BLESerial.setLocalName("UART_HS");
-  BLESerial.begin();
-
-  strip.begin(); // INITIALIZE NeoPixel strip object (REQUIRED)
-  strip.show();  // Turn OFF all pixels ASAP
-
-  //pinMode(PIN, OUTPUT);
-  //digitalWrite(PIN, LOW);
-
-  current_state = 'a';
-}
-
-void loop() {
-  while(BLESerial.available()) {
-    uint8_t character = BLESerial.read();
-    switch(character) {
-      case 'a':
-      case 'b':
-      case 'c':
-      case 'd':
-      case 'e':
-      case 'f':
-      case 'g':
-      case 'h':
-        current_state = character;
-        break;
-    };
-  }
-  switch(current_state) {
-    case 'a':
-      colorWipe(strip.Color(255,   0,   0), 20);    // Red
-      break;
-    case 'b':
-      colorWipe(strip.Color(  0, 255,   0), 20);    // Green
-      break;
-    case 'c':
-      colorWipe(strip.Color(  0,   0, 255), 20);    // Blue
-      break;
-    case 'd':
-      theaterChase(strip.Color(255,   0,   0), 20); // Red
-      break;
-    case 'e':
-      theaterChase(strip.Color(  0, 255,   0), 20); // Green
-      break;
-    case 'f':
-      theaterChase(strip.Color(255,   0, 255), 20); // Cyan
-      break;
-    case 'g':
-      rainbow(10);
-      break;
-    case 'h':
-      theaterChaseRainbow(20);
-      break;
-  }
-}
-
-// Fill strip pixels one after another with a color. Strip is NOT cleared
-// first; anything there will be covered pixel by pixel. Pass in color
-// (as a single 'packed' 32-bit value, which you can get by calling
-// strip.Color(red, green, blue) as shown in the loop() function above),
-// and a delay time (in milliseconds) between pixels.
-void colorWipe(uint32_t color, int wait) {
-  for(int i=0; i<strip.numPixels(); i++) { // For each pixel in strip...
-    strip.setPixelColor(i, color);         //  Set pixel's color (in RAM)
-    strip.show();                          //  Update strip to match
-    delay(wait);                           //  Pause for a moment
-  }
-}
-
-// Theater-marquee-style chasing lights. Pass in a color (32-bit value,
-// a la strip.Color(r,g,b) as mentioned above), and a delay time (in ms)
-// between frames.
-void theaterChase(uint32_t color, int wait) {
-  for(int a=0; a<10; a++) {  // Repeat 10 times...
-    for(int b=0; b<3; b++) { //  'b' counts from 0 to 2...
-      strip.clear();         //   Set all pixels in RAM to 0 (off)
-      // 'c' counts up from 'b' to end of strip in steps of 3...
-      for(int c=b; c<strip.numPixels(); c += 3) {
-        strip.setPixelColor(c, color); // Set pixel 'c' to value 'color'
-      }
-      strip.show(); // Update strip with new contents
-      delay(wait);  // Pause for a moment
-    }
-  }
-}
-
-// Rainbow cycle along whole strip. Pass delay time (in ms) between frames.
-void rainbow(int wait) {
-  // Hue of first pixel runs 5 complete loops through the color wheel.
-  // Color wheel has a range of 65536 but it's OK if we roll over, so
-  // just count from 0 to 5*65536. Adding 256 to firstPixelHue each time
-  // means we'll make 5*65536/256 = 1280 passes through this outer loop:
-  for(long firstPixelHue = 0; firstPixelHue < 5*65536; firstPixelHue += 256) {
-    for(int i=0; i<strip.numPixels(); i++) { // For each pixel in strip...
-      // Offset pixel hue by an amount to make one full revolution of the
-      // color wheel (range of 65536) along the length of the strip
-      // (strip.numPixels() steps):
-      int pixelHue = firstPixelHue + (i * 65536L / strip.numPixels());
-      // strip.ColorHSV() can take 1 or 3 arguments: a hue (0 to 65535) or
-      // optionally add saturation and value (brightness) (each 0 to 255).
-      // Here we're using just the single-argument hue variant. The result
-      // is passed through strip.gamma32() to provide 'truer' colors
-      // before assigning to each pixel:
-      strip.setPixelColor(i, strip.gamma32(strip.ColorHSV(pixelHue)));
-    }
-    strip.show(); // Update strip with new contents
-    delay(wait);  // Pause for a moment
-  }
-}
-
-// Rainbow-enhanced theater marquee. Pass delay time (in ms) between frames.
-void theaterChaseRainbow(int wait) {
-  int firstPixelHue = 0;     // First pixel starts at red (hue 0)
-  for(int a=0; a<30; a++) {  // Repeat 30 times...
-    for(int b=0; b<3; b++) { //  'b' counts from 0 to 2...
-      strip.clear();         //   Set all pixels in RAM to 0 (off)
-      // 'c' counts up from 'b' to end of strip in increments of 3...
-      for(int c=b; c<strip.numPixels(); c += 3) {
-        // hue of pixel 'c' is offset by an amount to make one full
-        // revolution of the color wheel (range 65536) along the length
-        // of the strip (strip.numPixels() steps):
-        int      hue   = firstPixelHue + c * 65536L / strip.numPixels();
-        uint32_t color = strip.gamma32(strip.ColorHSV(hue)); // hue -> RGB
-        strip.setPixelColor(c, color); // Set pixel 'c' to value 'color'
-      }
-      strip.show();                // Update strip with new contents
-      delay(wait);                 // Pause for a moment
-      firstPixelHue += 65536 / 90; // One cycle of color wheel over 90 frames
-    }
-  }
-}