remove .pio

1 files changed, 0 insertions, 248 deletions

diff --git a/.pio/libdeps/esp32-s3-n16r8/RF24/RF24_config.h b/.pio/libdeps/esp32-s3-n16r8/RF24/RF24_config.h
deleted file mode 100644
index c06429c..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/RF24/RF24_config.h
+++ /dev/null
@@ -1,248 +0,0 @@
-
-/*
- Copyright (C)
-    2011            J. Coliz <maniacbug@ymail.com>
-    2015-2019       TMRh20
-    2015            spaniakos <spaniakos@gmail.com>
-    2015            nerdralph
-    2015            zador-blood-stained
-    2016            akatran
-    2017-2019       Avamander <avamander@gmail.com>
-    2019            IkpeohaGodson
-    2021            2bndy5
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- version 2 as published by the Free Software Foundation.
-*/
-
-#ifndef RF24_CONFIG_H_
-#define RF24_CONFIG_H_
-
-/*** USER DEFINES:    ***/
-#define FAILURE_HANDLING
-//#define RF24_DEBUG
-//#define MINIMAL
-//#define SPI_UART    // Requires library from https://github.com/TMRh20/Sketches/tree/master/SPI_UART
-//#define SOFTSPI     // Requires library from https://github.com/greiman/DigitalIO
-
-/**
- * User access to internally used delay time (in microseconds) during RF24::powerUp()
- * @warning This default value compensates for all supported hardware. Only adjust this if you
- * know your radio's hardware is, in fact, genuine and reliable.
- */
-#if !defined(RF24_POWERUP_DELAY)
-    #define RF24_POWERUP_DELAY 5000
-#endif
-
-/**********************/
-#define rf24_max(a, b) ((a) > (b) ? (a) : (b))
-#define rf24_min(a, b) ((a) < (b) ? (a) : (b))
-
-/** @brief The default SPI speed (in Hz) */
-#ifndef RF24_SPI_SPEED
-    #define RF24_SPI_SPEED 10000000
-#endif
-
-//ATXMega
-#if defined(__AVR_ATxmega64D3__) || defined(__AVR_ATxmega128D3__) || defined(__AVR_ATxmega192D3__) || defined(__AVR_ATxmega256D3__) || defined(__AVR_ATxmega384D3__)
-    // In order to be available both in Windows and Linux this should take presence here.
-    #define XMEGA
-    #define XMEGA_D3
-    #include "utility/ATXMegaD3/RF24_arch_config.h"
-
-// RaspberryPi rp2xxx-based devices (e.g. RPi Pico board)
-#elif defined(PICO_BUILD) && !defined(ARDUINO)
-    #include "utility/rp2/RF24_arch_config.h"
-    #define sprintf_P sprintf
-
-#elif (!defined(ARDUINO)) // Any non-arduino device is handled via configure/Makefile
-    // The configure script detects device and copies the correct includes.h file to /utility/includes.h
-    // This behavior can be overridden by calling configure with respective parameters
-    // The includes.h file defines either RF24_RPi, MRAA, LITTLEWIRE or RF24_SPIDEV and includes the correct RF24_arch_config.h file
-    #include "utility/includes.h"
-
-    #ifndef sprintf_P
-        #define sprintf_P sprintf
-    #endif // sprintf_P
-
-//ATTiny
-#elif defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) || defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny2313__) || defined(__AVR_ATtiny4313__) || defined(__AVR_ATtiny861__) || defined(__AVR_ATtinyX5__) || defined(__AVR_ATtinyX4__) || defined(__AVR_ATtinyX313__) || defined(__AVR_ATtinyX61__)
-    #define RF24_TINY
-    #include "utility/ATTiny/RF24_arch_config.h"
-
-#elif defined(LITTLEWIRE) //LittleWire
-    #include "utility/LittleWire/RF24_arch_config.h"
-
-#elif defined(TEENSYDUINO) //Teensy
-    #include "utility/Teensy/RF24_arch_config.h"
-
-#else //Everything else
-    #include <Arduino.h>
-
-    #ifdef NUM_DIGITAL_PINS
-        #if NUM_DIGITAL_PINS < 255
-typedef uint8_t rf24_gpio_pin_t;
-            #define RF24_PIN_INVALID 0xFF
-        #else
-typedef uint16_t rf24_gpio_pin_t;
-            #define RF24_PIN_INVALID 0xFFFF
-        #endif
-    #else
-typedef uint16_t rf24_gpio_pin_t;
-        #define RF24_PIN_INVALID 0xFFFF
-    #endif
-
-    #if defined(ARDUINO_NRF54L15)
-        #define sprintf_P sprintf
-    #endif
-
-    #if defined(ARDUINO) && !defined(__arm__) && !defined(__ARDUINO_X86__)
-        #if defined SPI_UART
-            #include <SPI_UART.h>
-            #define _SPI uspi
-        #elif defined(SOFTSPI)
-            // change these pins to your liking
-            //
-            #ifndef SOFT_SPI_MISO_PIN
-                #define SOFT_SPI_MISO_PIN 9
-            #endif // SOFT_SPI_MISO_PIN
-
-            #ifndef SOFT_SPI_MOSI_PIN
-                #define SOFT_SPI_MOSI_PIN 8
-            #endif // SOFT_SPI_MOSI_PIN
-
-            #ifndef SOFT_SPI_SCK_PIN
-                #define SOFT_SPI_SCK_PIN 7
-            #endif // SOFT_SPI_SCK_PIN
-
-const uint8_t SPI_MODE = 0;
-            #define _SPI spi
-
-        #elif defined(ARDUINO_SAM_DUE)
-            #include <SPI.h>
-            #define _SPI SPI
-
-        #else // !defined (SPI_UART) && !defined (SOFTSPI)
-            #include <SPI.h>
-            #define _SPI SPIClass
-            #define RF24_SPI_PTR
-        #endif // !defined (SPI_UART) && !defined (SOFTSPI)
-
-    #else // !defined(ARDUINO) || defined (__arm__) || defined (__ARDUINO_X86__)
-        // Define _BV for non-Arduino platforms and for Arduino DUE
-        #include <stdint.h>
-        #include <stdio.h>
-        #include <string.h>
-
-        #if defined(__arm__) || defined(__ARDUINO_X86__)
-            #if defined(__arm__) && defined(SPI_UART)
-                #include <SPI_UART.h>
-                #define _SPI uspi
-
-            #else // !defined (__arm__) || !defined (SPI_UART)
-                #include <SPI.h>
-                #define _SPI SPIClass
-                #define RF24_SPI_PTR
-
-            #endif // !defined (__arm__) || !defined (SPI_UART)
-        #elif !defined(__arm__) && !defined(__ARDUINO_X86__)
-// fallback to unofficially supported Hardware (courtesy of ManiacBug)
-extern HardwareSPI SPI;
-            #define _SPI HardwareSPI
-            #define RF24_SPI_PTR
-
-        #endif // !defined(__arm__) && !defined (__ARDUINO_X86__)
-
-        #ifndef _BV
-            #define _BV(x) (1 << (x))
-        #endif
-    #endif // defined (ARDUINO) && !defined (__arm__) && !defined (__ARDUINO_X86__)
-
-    #ifdef RF24_DEBUG
-        #define IF_RF24_DEBUG(x) ({ x; })
-    #else
-        #define IF_RF24_DEBUG(x)
-        #if defined(RF24_TINY)
-            #define printf_P(...)
-        #endif // defined(RF24_TINY)
-
-    #endif // RF24_DEBUG
-
-    #if defined(__ARDUINO_X86__)
-        #define printf_P printf
-        #define _BV(bit) (1 << (bit))
-
-    #endif // defined (__ARDUINO_X86__)
-
-    // Progmem is Arduino-specific
-    #if defined(ARDUINO_ARCH_ESP8266) || defined(ESP32) || (defined(ARDUINO_ARCH_RP2040) && !defined(ARDUINO_ARCH_MBED))
-        #include <pgmspace.h>
-        #define PRIPSTR "%s"
-        #ifndef pgm_read_ptr
-            #define pgm_read_ptr(p) (*(void* const*)(p))
-        #endif
-        // Serial.printf() is no longer defined in the unifying Arduino/ArduinoCore-API repo
-        // Serial.printf() is defined if using the arduino-pico/esp32/8266 repo
-        #if defined(ARDUINO_ARCH_ESP32) // do not `undef` when using the espressif SDK only
-            #undef printf_P             // needed for ESP32 core
-        #endif
-        #define printf_P Serial.printf
-    #elif defined(ARDUINO) && !defined(ESP_PLATFORM) && !defined(__arm__) && !defined(__ARDUINO_X86__) || defined(XMEGA)
-        #include <avr/pgmspace.h>
-        #define PRIPSTR "%S"
-
-    #else                     // !defined (ARDUINO) || defined (ESP_PLATFORM) || defined (__arm__) || defined (__ARDUINO_X86__) && !defined (XMEGA)
-        #if !defined(ARDUINO) // This doesn't work on Arduino DUE
-typedef char const char;
-        #else                 // Fill in pgm_read_byte that is used
-            #if defined(ARDUINO_ARCH_AVR) || defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_SAM_DUE)
-                #include <avr/pgmspace.h> // added to ArduinoCore-sam (Due core) in 2013
-            #endif
-
-            // Since the official arduino/ArduinoCore-samd repo switched to a unified API in 2016,
-            // Serial.printf() is no longer defined in the unifying Arduino/ArduinoCore-API repo
-            #if defined(ARDUINO_ARCH_SAMD) && defined(ARDUINO_SAMD_ADAFRUIT)
-                // it is defined if using the adafruit/ArduinoCore-samd repo
-                #define printf_P Serial.printf
-            #endif // defined (ARDUINO_ARCH_SAMD)
-
-            #ifndef pgm_read_byte
-                #define pgm_read_byte(addr) (*(const unsigned char*)(addr))
-            #endif
-        #endif // !defined (ARDUINO)
-
-        #ifndef prog_uint16_t
-typedef uint16_t prog_uint16_t;
-        #endif
-        #ifndef PSTR
-            #define PSTR(x) (x)
-        #endif
-        #ifndef printf_P
-            #define printf_P printf
-        #endif
-        #ifndef strlen_P
-            #define strlen_P strlen
-        #endif
-        #ifndef PROGMEM
-            #define PROGMEM
-        #endif
-        #ifndef pgm_read_word
-            #define pgm_read_word(p) (*(const unsigned short*)(p))
-        #endif
-        #if !defined pgm_read_ptr || defined ARDUINO_ARCH_MBED
-            #define pgm_read_ptr(p) (*(void* const*)(p))
-        #endif
-        #ifndef PRIPSTR
-            #define PRIPSTR "%s"
-        #endif
-
-    #endif // !defined (ARDUINO) || defined (ESP_PLATFORM) || defined (__arm__) || defined (__ARDUINO_X86__) && !defined (XMEGA)
-
-#endif //Everything else
-
-#if defined(SPI_HAS_TRANSACTION) && !defined(SPI_UART) && !defined(SOFTSPI)
-    #define RF24_SPI_TRANSACTIONS
-#endif // defined (SPI_HAS_TRANSACTION) && !defined (SPI_UART) && !defined (SOFTSPI)
-
-#endif // RF24_CONFIG_H_