remove .pio

1 files changed, 0 insertions, 207 deletions

diff --git a/.pio/libdeps/esp32-s3-n16r8/RF24/examples/AcknowledgementPayloads/AcknowledgementPayloads.ino b/.pio/libdeps/esp32-s3-n16r8/RF24/examples/AcknowledgementPayloads/AcknowledgementPayloads.ino
deleted file mode 100644
index af0d7db..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/RF24/examples/AcknowledgementPayloads/AcknowledgementPayloads.ino
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * See documentation at https://nRF24.github.io/RF24
- * See License information at root directory of this library
- * Author: Brendan Doherty (2bndy5)
- */
-
-/**
- * A simple example of sending data from 1 nRF24L01 transceiver to another
- * with Acknowledgement (ACK) payloads attached to ACK packets.
- *
- * This example was written to be used on 2 devices acting as "nodes".
- * Use the Serial Monitor to change each node's behavior.
- */
-#include <SPI.h>
-#include "printf.h"
-#include "RF24.h"
-
-#define CE_PIN 7
-#define CSN_PIN 8
-// instantiate an object for the nRF24L01 transceiver
-RF24 radio(CE_PIN, CSN_PIN);
-
-// an identifying device destination
-// Let these addresses be used for the pair
-uint8_t address[][6] = { "1Node", "2Node" };
-// It is very helpful to think of an address as a path instead of as
-// an identifying device destination
-// to use different addresses on a pair of radios, we need a variable to
-
-// uniquely identify which address this radio will use to transmit
-bool radioNumber = 1;  // 0 uses address[0] to transmit, 1 uses address[1] to transmit
-
-// Used to control whether this node is sending or receiving
-bool role = false;  // true = TX role, false = RX role
-
-// For this example, we'll be using a payload containing
-// a string & an integer number that will be incremented
-// on every successful transmission.
-// Make a data structure to store the entire payload of different datatypes
-struct PayloadStruct {
-  char message[7];  // only using 6 characters for TX & ACK payloads
-  uint8_t counter;
-};
-PayloadStruct payload;
-
-void setup() {
-
-  Serial.begin(115200);
-  while (!Serial) {
-    // some boards need to wait to ensure access to serial over USB
-  }
-
-  // initialize the transceiver on the SPI bus
-  if (!radio.begin()) {
-    Serial.println(F("radio hardware is not responding!!"));
-    while (1) {}  // hold in infinite loop
-  }
-
-  // print example's introductory prompt
-  Serial.println(F("RF24/examples/AcknowledgementPayloads"));
-
-  // To set the radioNumber via the Serial monitor on startup
-  Serial.println(F("Which radio is this? Enter '0' or '1'. Defaults to '0'"));
-  while (!Serial.available()) {
-    // wait for user input
-  }
-  char input = Serial.parseInt();
-  radioNumber = input == 1;
-  Serial.print(F("radioNumber = "));
-  Serial.println((int)radioNumber);
-
-  // role variable is hardcoded to RX behavior, inform the user of this
-  Serial.println(F("*** PRESS 'T' to begin transmitting to the other node"));
-
-  // Set the PA Level low to try preventing power supply related problems
-  // because these examples are likely run with nodes in close proximity to
-  // each other.
-  radio.setPALevel(RF24_PA_LOW);  // RF24_PA_MAX is default.
-
-  // to use ACK payloads, we need to enable dynamic payload lengths (for all nodes)
-  radio.enableDynamicPayloads();  // ACK payloads are dynamically sized
-
-  // Acknowledgement packets have no payloads by default. We need to enable
-  // this feature for all nodes (TX & RX) to use ACK payloads.
-  radio.enableAckPayload();
-
-  // set the TX address of the RX node for use on the TX pipe (pipe 0)
-  radio.stopListening(address[radioNumber]);  // put radio in TX mode
-
-  // set the RX address of the TX node into a RX pipe
-  radio.openReadingPipe(1, address[!radioNumber]);  // using pipe 1
-
-  // additional setup specific to the node's role
-  if (role) {
-    // setup the TX payload
-    memcpy(payload.message, "Hello ", 6);  // set the payload message
-  } else {
-    // setup the ACK payload & load the first response into the FIFO
-
-    memcpy(payload.message, "World ", 6);  // set the payload message
-    // load the payload for the first received transmission on pipe 0
-    radio.writeAckPayload(1, &payload, sizeof(payload));
-
-    radio.startListening();  // put radio in RX mode
-  }
-
-  // For debugging info
-  // printf_begin();             // needed only once for printing details
-  // radio.printDetails();       // (smaller) function that prints raw register values
-  // radio.printPrettyDetails(); // (larger) function that prints human readable data
-}
-
-void loop() {
-
-  if (role) {
-    // This device is a TX node
-
-    unsigned long start_timer = micros();                  // start the timer
-    bool report = radio.write(&payload, sizeof(payload));  // transmit & save the report
-    unsigned long end_timer = micros();                    // end the timer
-
-    if (report) {
-      Serial.print(F("Transmission successful! "));  // payload was delivered
-      Serial.print(F("Time to transmit = "));
-      Serial.print(end_timer - start_timer);  // print the timer result
-      Serial.print(F(" us. Sent: "));
-      Serial.print(payload.message);  // print the outgoing message
-      Serial.print(payload.counter);  // print the outgoing counter
-      uint8_t pipe;
-      if (radio.available(&pipe)) {  // is there an ACK payload? grab the pipe number that received it
-        PayloadStruct received;
-        radio.read(&received, sizeof(received));  // get incoming ACK payload
-        Serial.print(F(" Received "));
-        Serial.print(radio.getDynamicPayloadSize());  // print incoming payload size
-        Serial.print(F(" bytes on pipe "));
-        Serial.print(pipe);  // print pipe number that received the ACK
-        Serial.print(F(": "));
-        Serial.print(received.message);    // print incoming message
-        Serial.println(received.counter);  // print incoming counter
-
-        // save incoming counter & increment for next outgoing
-        payload.counter = received.counter + 1;
-
-      } else {
-        Serial.println(F(" Received: an empty ACK packet"));  // empty ACK packet received
-      }
-
-
-    } else {
-      Serial.println(F("Transmission failed or timed out"));  // payload was not delivered
-    }
-
-    // to make this example readable in the serial monitor
-    delay(1000);  // slow transmissions down by 1 second
-
-  } else {
-    // This device is a RX node
-
-    uint8_t pipe;
-    if (radio.available(&pipe)) {                     // is there a payload? get the pipe number that received it
-      uint8_t bytes = radio.getDynamicPayloadSize();  // get the size of the payload
-      PayloadStruct received;
-      radio.read(&received, sizeof(received));  // get incoming payload
-      Serial.print(F("Received "));
-      Serial.print(bytes);  // print the size of the payload
-      Serial.print(F(" bytes on pipe "));
-      Serial.print(pipe);  // print the pipe number
-      Serial.print(F(": "));
-      Serial.print(received.message);  // print incoming message
-      Serial.print(received.counter);  // print incoming counter
-      Serial.print(F(" Sent: "));
-      Serial.print(payload.message);    // print outgoing message
-      Serial.println(payload.counter);  // print outgoing counter
-
-      // save incoming counter & increment for next outgoing
-      payload.counter = received.counter + 1;
-      // load the payload for the first received transmission on pipe 0
-      radio.writeAckPayload(1, &payload, sizeof(payload));
-    }
-  }  // role
-
-  if (Serial.available()) {
-    // change the role via the serial monitor
-
-    char c = toupper(Serial.read());
-    if (c == 'T' && !role) {
-      // Become the TX node
-
-      role = true;
-      Serial.println(F("*** CHANGING TO TRANSMIT ROLE -- PRESS 'R' TO SWITCH BACK"));
-
-      memcpy(payload.message, "Hello ", 6);  // change payload message
-      radio.stopListening();                 // this also discards any unused ACK payloads
-
-    } else if (c == 'R' && role) {
-      // Become the RX node
-
-      role = false;
-      Serial.println(F("*** CHANGING TO RECEIVE ROLE -- PRESS 'T' TO SWITCH BACK"));
-      memcpy(payload.message, "World ", 6);  // change payload message
-
-      // load the payload for the first received transmission on pipe 0
-      radio.writeAckPayload(1, &payload, sizeof(payload));
-      radio.startListening();
-    }
-  }
-}  // loop