Migrate to PlatformIO

Now since i have been able to make PSRAM working with platformio, i
don't have to use this shitty Arduino-IDE anymore which does not even
allow me to use subfolders like a normal programmer would do

1 files changed, 0 insertions, 194 deletions

diff --git a/firmware/ELECHOUSE_CC1101_SRC_DRV.h b/firmware/ELECHOUSE_CC1101_SRC_DRV.h
deleted file mode 100644
index 136a9b5..0000000
--- a/firmware/ELECHOUSE_CC1101_SRC_DRV.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/*

-  ELECHOUSE_CC1101.cpp - CC1101 module library

-  Copyright (c) 2010 Michael.

-    Author: Michael, <www.elechouse.com>

-    Version: November 12, 2010

-

-  This library is designed to use CC1101/CC1100 module on Arduino platform.

-  CC1101/CC1100 module is an useful wireless module.Using the functions of the 

-  library, you can easily send and receive data by the CC1101/CC1100 module. 

-  Just have fun!

-  For the details, please refer to the datasheet of CC1100/CC1101.

-----------------------------------------------------------------------------------------------------------------

-cc1101 Driver for RC Switch. Mod by Little Satan. With permission to modify and publish Wilson Shen (ELECHOUSE).

-----------------------------------------------------------------------------------------------------------------

-*/

-#ifndef ELECHOUSE_CC1101_SRC_DRV_h

-#define ELECHOUSE_CC1101_SRC_DRV_h

-

-#include <Arduino.h>

-

-//***************************************CC1101 define**************************************************//

-// CC1101 CONFIG REGSITER

-#define CC1101_IOCFG2       0x00        // GDO2 output pin configuration

-#define CC1101_IOCFG1       0x01        // GDO1 output pin configuration

-#define CC1101_IOCFG0       0x02        // GDO0 output pin configuration

-#define CC1101_FIFOTHR      0x03        // RX FIFO and TX FIFO thresholds

-#define CC1101_SYNC1        0x04        // Sync word, high INT8U

-#define CC1101_SYNC0        0x05        // Sync word, low INT8U

-#define CC1101_PKTLEN       0x06        // Packet length

-#define CC1101_PKTCTRL1     0x07        // Packet automation control

-#define CC1101_PKTCTRL0     0x08        // Packet automation control

-#define CC1101_ADDR         0x09        // Device address

-#define CC1101_CHANNR       0x0A        // Channel number

-#define CC1101_FSCTRL1      0x0B        // Frequency synthesizer control

-#define CC1101_FSCTRL0      0x0C        // Frequency synthesizer control

-#define CC1101_FREQ2        0x0D        // Frequency control word, high INT8U

-#define CC1101_FREQ1        0x0E        // Frequency control word, middle INT8U

-#define CC1101_FREQ0        0x0F        // Frequency control word, low INT8U

-#define CC1101_MDMCFG4      0x10        // Modem configuration

-#define CC1101_MDMCFG3      0x11        // Modem configuration

-#define CC1101_MDMCFG2      0x12        // Modem configuration

-#define CC1101_MDMCFG1      0x13        // Modem configuration

-#define CC1101_MDMCFG0      0x14        // Modem configuration

-#define CC1101_DEVIATN      0x15        // Modem deviation setting

-#define CC1101_MCSM2        0x16        // Main Radio Control State Machine configuration

-#define CC1101_MCSM1        0x17        // Main Radio Control State Machine configuration

-#define CC1101_MCSM0        0x18        // Main Radio Control State Machine configuration

-#define CC1101_FOCCFG       0x19        // Frequency Offset Compensation configuration

-#define CC1101_BSCFG        0x1A        // Bit Synchronization configuration

-#define CC1101_AGCCTRL2     0x1B        // AGC control

-#define CC1101_AGCCTRL1     0x1C        // AGC control

-#define CC1101_AGCCTRL0     0x1D        // AGC control

-#define CC1101_WOREVT1      0x1E        // High INT8U Event 0 timeout

-#define CC1101_WOREVT0      0x1F        // Low INT8U Event 0 timeout

-#define CC1101_WORCTRL      0x20        // Wake On Radio control

-#define CC1101_FREND1       0x21        // Front end RX configuration

-#define CC1101_FREND0       0x22        // Front end TX configuration

-#define CC1101_FSCAL3       0x23        // Frequency synthesizer calibration

-#define CC1101_FSCAL2       0x24        // Frequency synthesizer calibration

-#define CC1101_FSCAL1       0x25        // Frequency synthesizer calibration

-#define CC1101_FSCAL0       0x26        // Frequency synthesizer calibration

-#define CC1101_RCCTRL1      0x27        // RC oscillator configuration

-#define CC1101_RCCTRL0      0x28        // RC oscillator configuration

-#define CC1101_FSTEST       0x29        // Frequency synthesizer calibration control

-#define CC1101_PTEST        0x2A        // Production test

-#define CC1101_AGCTEST      0x2B        // AGC test

-#define CC1101_TEST2        0x2C        // Various test settings

-#define CC1101_TEST1        0x2D        // Various test settings

-#define CC1101_TEST0        0x2E        // Various test settings

-

-//CC1101 Strobe commands

-#define CC1101_SRES         0x30        // Reset chip.

-#define CC1101_SFSTXON      0x31        // Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1).

-                                        // If in RX/TX: Go to a wait state where only the synthesizer is

-                                        // running (for quick RX / TX turnaround).

-#define CC1101_SXOFF        0x32        // Turn off crystal oscillator.

-#define CC1101_SCAL         0x33        // Calibrate frequency synthesizer and turn it off

-                                        // (enables quick start).

-#define CC1101_SRX          0x34        // Enable RX. Perform calibration first if coming from IDLE and

-                                        // MCSM0.FS_AUTOCAL=1.

-#define CC1101_STX          0x35        // In IDLE state: Enable TX. Perform calibration first if

-                                        // MCSM0.FS_AUTOCAL=1. If in RX state and CCA is enabled:

-                                        // Only go to TX if channel is clear.

-#define CC1101_SIDLE        0x36        // Exit RX / TX, turn off frequency synthesizer and exit

-                                        // Wake-On-Radio mode if applicable.

-#define CC1101_SAFC         0x37        // Perform AFC adjustment of the frequency synthesizer

-#define CC1101_SWOR         0x38        // Start automatic RX polling sequence (Wake-on-Radio)

-#define CC1101_SPWD         0x39        // Enter power down mode when CSn goes high.

-#define CC1101_SFRX         0x3A        // Flush the RX FIFO buffer.

-#define CC1101_SFTX         0x3B        // Flush the TX FIFO buffer.

-#define CC1101_SWORRST      0x3C        // Reset real time clock.

-#define CC1101_SNOP         0x3D        // No operation. May be used to pad strobe commands to two

-                                        // INT8Us for simpler software.

-//CC1101 STATUS REGSITER

-#define CC1101_PARTNUM      0x30

-#define CC1101_VERSION      0x31

-#define CC1101_FREQEST      0x32

-#define CC1101_LQI          0x33

-#define CC1101_RSSI         0x34

-#define CC1101_MARCSTATE    0x35

-#define CC1101_WORTIME1     0x36

-#define CC1101_WORTIME0     0x37

-#define CC1101_PKTSTATUS    0x38

-#define CC1101_VCO_VC_DAC   0x39

-#define CC1101_TXBYTES      0x3A

-#define CC1101_RXBYTES      0x3B

-

-//CC1101 PATABLE,TXFIFO,RXFIFO

-#define CC1101_PATABLE      0x3E

-#define CC1101_TXFIFO       0x3F

-#define CC1101_RXFIFO       0x3F

-

-//************************************* class **************************************************//

-class ELECHOUSE_CC1101

-{

-private:

-  void SpiStart(void);

-  void SpiEnd(void);

-  void GDO_Set (void);

-  void GDO0_Set (void);

-  void Reset (void);

-  void setSpi(void);

-  void RegConfigSettings(void);

-  void Calibrate(void);

-  void Split_PKTCTRL0(void);

-  void Split_PKTCTRL1(void);

-  void Split_MDMCFG1(void);

-  void Split_MDMCFG2(void);

-  void Split_MDMCFG4(void);

-public:

-  void Init(void);

-  byte SpiReadStatus(byte addr);

-  void setSpiPin(byte sck, byte miso, byte mosi, byte ss);

-  void addSpiPin(byte sck, byte miso, byte mosi, byte ss, byte modul);

-  void setGDO(byte gdo0, byte gdo2);

-  void setGDO0(byte gdo0);

-  void addGDO(byte gdo0, byte gdo2, byte modul);

-  void addGDO0(byte gdo0, byte modul);

-  void setModul(byte modul);

-  void setCCMode(bool s);

-  void setModulation(byte m);

-  void setPA(int p);

-  void setMHZ(float mhz);

-  void setChannel(byte chnl);

-  void setChsp(float f);

-  void setRxBW(float f);

-  void setDRate(float d);

-  void setDeviation(float d);

-  void SetTx(void);

-  void SetRx(void);

-  void SetTx(float mhz);

-  void SetRx(float mhz);

-   int getRssi(void);

-  byte getLqi(void);

-  void setSres(void);

-  void setSidle(void);

-  void goSleep(void);

-  void SendData(byte *txBuffer, byte size);

-  void SendData(char *txchar);

-  void SendData(byte *txBuffer, byte size, int t);

-  void SendData(char *txchar, int t);

-  byte CheckReceiveFlag(void);

-  byte ReceiveData(byte *rxBuffer);

-  bool CheckCRC(void);

-  void SpiStrobe(byte strobe);

-  void SpiWriteReg(byte addr, byte value);

-  void SpiWriteBurstReg(byte addr, byte *buffer, byte num);

-  byte SpiReadReg(byte addr);

-  void SpiReadBurstReg(byte addr, byte *buffer, byte num);

-  void setClb(byte b, byte s, byte e);

-  bool getCC1101(void);

-  byte getMode(void);

-  void setSyncWord(byte sh, byte sl);

-  void setAddr(byte v);

-  void setWhiteData(bool v);

-  void setPktFormat(byte v);

-  void setCrc(bool v);

-  void setLengthConfig(byte v);

-  void setPacketLength(byte v);

-  void setDcFilterOff(bool v);

-  void setManchester(bool v);

-  void setSyncMode(byte v);

-  void setFEC(bool v);

-  void setPRE(byte v);

-  void setPQT(byte v);

-  void setCRC_AF(bool v);

-  void setAppendStatus(bool v);

-  void setAdrChk(byte v);

-  bool CheckRxFifo(int t);

-};

-

-extern ELECHOUSE_CC1101 ELECHOUSE_cc1101;

-

-#endif
\ No newline at end of file