Migrate to PlatformIO

Now since i have been able to make PSRAM working with platformio, i
don't have to use this shitty Arduino-IDE anymore which does not even
allow me to use subfolders like a normal programmer would do

1 files changed, 0 insertions, 48 deletions

diff --git a/firmware/config.h b/firmware/config.h
deleted file mode 100644
index ce40ebc..0000000
--- a/firmware/config.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#pragma once
-
-// ================= NRF24 =================
-#define CE1_PIN 10
-#define CSN1_PIN 11
-
-#define CE2_PIN 12
-#define CSN2_PIN 13
-
-#define NRF_SCK 18
-#define NRF_MISO 16
-#define NRF_MOSI 17
-
-// ================== OLED ===================
-#define OLED_SDA_PIN 8
-#define OLED_SCL_PIN 9
-
-/////////////////cc1101 vars//////////////
-// CC1101 via FSPI
-#define cc1101_SCK 15
-#define cc1101_MISO 3
-#define cc1101_MOSI 46
-
-//////////////cc1101(1)//////////
-#define CC1101_CS 45
-#define CC1101_GDO0 21
-#define CC1101_GDO2 47
-
-/////////////cc1101(2)//////////
-#define CC1101_2_CS 40
-#define CC1101_2_GDO0 41
-#define CC1101_2_GDO2 42
-
-// SD Card via HSPI
-#define SD_SCK 14
-#define SD_MISO 39
-#define SD_MOSI 38
-#define SD_CS 37
-
-
-// =================== Buttons ====================
-#define BTN_UP 4
-#define BTN_DOWN 5
-#define BTN_SELECT 6
-#define BTN_BACK 7
-#define BTN_LEFT 1
-#define BTN_RIGHT 2
-