summaryrefslogtreecommitdiff
path: root/.pio/libdeps/esp32-s3-n16r8/Adafruit BusIO/Adafruit_SPIDevice.cpp
diff options
context:
space:
mode:
Diffstat (limited to '.pio/libdeps/esp32-s3-n16r8/Adafruit BusIO/Adafruit_SPIDevice.cpp')
-rw-r--r--.pio/libdeps/esp32-s3-n16r8/Adafruit BusIO/Adafruit_SPIDevice.cpp512
1 files changed, 0 insertions, 512 deletions
diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit BusIO/Adafruit_SPIDevice.cpp b/.pio/libdeps/esp32-s3-n16r8/Adafruit BusIO/Adafruit_SPIDevice.cpp
deleted file mode 100644
index 3283de6..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/Adafruit BusIO/Adafruit_SPIDevice.cpp
+++ /dev/null
@@ -1,512 +0,0 @@
-#include "Adafruit_SPIDevice.h"
-
-// #define DEBUG_SERIAL Serial
-
-#ifdef BUSIO_USE_FAST_PINIO
-#define BUSIO_SET_CLOCK_LOW() (*clkPort = *clkPort & ~clkPinMask)
-#define BUSIO_SET_CLOCK_HIGH() (*clkPort = *clkPort | clkPinMask)
-#define BUSIO_READ_MISO() (*misoPort & misoPinMask)
-#define BUSIO_WRITE_MOSI(value) \
- do { \
- if (value) \
- *mosiPort = *mosiPort | mosiPinMask; \
- else \
- *mosiPort = *mosiPort & ~mosiPinMask; \
- } while (0)
-#else
-#define BUSIO_SET_CLOCK_LOW() digitalWrite(_sck, LOW)
-#define BUSIO_SET_CLOCK_HIGH() digitalWrite(_sck, HIGH)
-#define BUSIO_READ_MISO() digitalRead(_miso)
-#define BUSIO_WRITE_MOSI(value) digitalWrite(_mosi, value)
-#endif
-
-/*!
- * @brief Create an SPI device with the given CS pin and settings
- * @param cspin The arduino pin number to use for chip select
- * @param freq The SPI clock frequency to use, defaults to 1MHz
- * @param dataOrder The SPI data order to use for bits within each byte,
- * defaults to SPI_BITORDER_MSBFIRST
- * @param dataMode The SPI mode to use, defaults to SPI_MODE0
- * @param theSPI The SPI bus to use, defaults to &theSPI
- */
-Adafruit_SPIDevice::Adafruit_SPIDevice(int8_t cspin, uint32_t freq,
- BusIOBitOrder dataOrder,
- uint8_t dataMode, SPIClass *theSPI) {
-#ifdef BUSIO_HAS_HW_SPI
- _cs = cspin;
- _sck = _mosi = _miso = -1;
- _spi = theSPI;
- _begun = false;
- _spiSetting = new SPISettings(freq, dataOrder, dataMode);
- _freq = freq;
- _dataOrder = dataOrder;
- _dataMode = dataMode;
-#else
- // unused, but needed to suppress compiler warns
- (void)cspin;
- (void)freq;
- (void)dataOrder;
- (void)dataMode;
- (void)theSPI;
-#endif
-}
-
-/*!
- * @brief Create an SPI device with the given CS pin and settings
- * @param cspin The arduino pin number to use for chip select
- * @param sckpin The arduino pin number to use for SCK
- * @param misopin The arduino pin number to use for MISO, set to -1 if not
- * used
- * @param mosipin The arduino pin number to use for MOSI, set to -1 if not
- * used
- * @param freq The SPI clock frequency to use, defaults to 1MHz
- * @param dataOrder The SPI data order to use for bits within each byte,
- * defaults to SPI_BITORDER_MSBFIRST
- * @param dataMode The SPI mode to use, defaults to SPI_MODE0
- */
-Adafruit_SPIDevice::Adafruit_SPIDevice(int8_t cspin, int8_t sckpin,
- int8_t misopin, int8_t mosipin,
- uint32_t freq, BusIOBitOrder dataOrder,
- uint8_t dataMode) {
- _cs = cspin;
- _sck = sckpin;
- _miso = misopin;
- _mosi = mosipin;
-
-#ifdef BUSIO_USE_FAST_PINIO
- csPort = (BusIO_PortReg *)portOutputRegister(digitalPinToPort(cspin));
- csPinMask = digitalPinToBitMask(cspin);
- if (mosipin != -1) {
- mosiPort = (BusIO_PortReg *)portOutputRegister(digitalPinToPort(mosipin));
- mosiPinMask = digitalPinToBitMask(mosipin);
- }
- if (misopin != -1) {
- misoPort = (BusIO_PortReg *)portInputRegister(digitalPinToPort(misopin));
- misoPinMask = digitalPinToBitMask(misopin);
- }
- clkPort = (BusIO_PortReg *)portOutputRegister(digitalPinToPort(sckpin));
- clkPinMask = digitalPinToBitMask(sckpin);
-#endif
-
- _freq = freq;
- _dataOrder = dataOrder;
- _dataMode = dataMode;
- _begun = false;
-}
-
-/*!
- * @brief Release memory allocated in constructors
- */
-Adafruit_SPIDevice::~Adafruit_SPIDevice() {
- if (_spiSetting)
- delete _spiSetting;
-}
-
-/*!
- * @brief Initializes SPI bus and sets CS pin high
- * @return Always returns true because there's no way to test success of SPI
- * init
- */
-bool Adafruit_SPIDevice::begin(void) {
- if (_cs != -1) {
- pinMode(_cs, OUTPUT);
- digitalWrite(_cs, HIGH);
- }
-
- if (_spi) { // hardware SPI
-#ifdef BUSIO_HAS_HW_SPI
- _spi->begin();
-#endif
- } else {
- pinMode(_sck, OUTPUT);
-
- if ((_dataMode == SPI_MODE0) || (_dataMode == SPI_MODE1)) {
- // idle low on mode 0 and 1
- digitalWrite(_sck, LOW);
- } else {
- // idle high on mode 2 or 3
- digitalWrite(_sck, HIGH);
- }
- if (_mosi != -1) {
- pinMode(_mosi, OUTPUT);
- digitalWrite(_mosi, HIGH);
- }
- if (_miso != -1) {
- pinMode(_miso, INPUT);
- }
- }
-
- _begun = true;
- return true;
-}
-
-/*!
- * @brief Transfer (send/receive) a buffer over hard/soft SPI, without
- * transaction management
- * @param buffer The buffer to send and receive at the same time
- * @param len The number of bytes to transfer
- */
-void Adafruit_SPIDevice::transfer(uint8_t *buffer, size_t len) {
- //
- // HARDWARE SPI
- //
- if (_spi) {
-#ifdef BUSIO_HAS_HW_SPI
-#if defined(SPARK)
- _spi->transfer(buffer, buffer, len, nullptr);
-#elif defined(STM32)
- for (size_t i = 0; i < len; i++) {
- _spi->transfer(buffer[i]);
- }
-#else
- _spi->transfer(buffer, len);
-#endif
- return;
-#endif
- }
-
- //
- // SOFTWARE SPI
- //
- uint8_t startbit;
- if (_dataOrder == SPI_BITORDER_LSBFIRST) {
- startbit = 0x1;
- } else {
- startbit = 0x80;
- }
-
- bool towrite, lastmosi = !(buffer[0] & startbit);
- uint8_t bitdelay_us = (1000000 / _freq) / 2;
-
- for (size_t i = 0; i < len; i++) {
- uint8_t reply = 0;
- uint8_t send = buffer[i];
-
- /*
- Serial.print("\tSending software SPI byte 0x");
- Serial.print(send, HEX);
- Serial.print(" -> 0x");
- */
-
- // Serial.print(send, HEX);
- for (uint8_t b = startbit; b != 0;
- b = (_dataOrder == SPI_BITORDER_LSBFIRST) ? b << 1 : b >> 1) {
-
- if (bitdelay_us) {
- delayMicroseconds(bitdelay_us);
- }
-
- if (_dataMode == SPI_MODE0 || _dataMode == SPI_MODE2) {
- towrite = send & b;
- if ((_mosi != -1) && (lastmosi != towrite)) {
- BUSIO_WRITE_MOSI(towrite);
- lastmosi = towrite;
- }
-
- BUSIO_SET_CLOCK_HIGH();
-
- if (bitdelay_us) {
- delayMicroseconds(bitdelay_us);
- }
-
- if (_miso != -1) {
- if (BUSIO_READ_MISO())
- reply |= b;
- }
-
- BUSIO_SET_CLOCK_LOW();
-
- } else if (_dataMode == SPI_MODE3) {
-
- if (_mosi != -1) { // transmit on falling edge
- BUSIO_WRITE_MOSI(send & b);
- }
-
- BUSIO_SET_CLOCK_LOW();
-
- if (bitdelay_us) {
- delayMicroseconds(bitdelay_us);
- }
-
- BUSIO_SET_CLOCK_HIGH();
-
- if (bitdelay_us) {
- delayMicroseconds(bitdelay_us);
- }
-
- if (_miso != -1) { // read on rising edge
- if (BUSIO_READ_MISO()) {
- reply |= b;
- }
- }
-
- } else { // || _dataMode == SPI_MODE1)
-
- BUSIO_SET_CLOCK_HIGH();
-
- if (bitdelay_us) {
- delayMicroseconds(bitdelay_us);
- }
-
- if (_mosi != -1) {
- BUSIO_WRITE_MOSI(send & b);
- }
-
- BUSIO_SET_CLOCK_LOW();
-
- if (_miso != -1) {
- if (BUSIO_READ_MISO()) {
- reply |= b;
- }
- }
- }
- }
- if (_miso != -1) {
- buffer[i] = reply;
- }
- }
- return;
-}
-
-/*!
- * @brief Transfer (send/receive) one byte over hard/soft SPI, without
- * transaction management
- * @param send The byte to send
- * @return The byte received while transmitting
- */
-uint8_t Adafruit_SPIDevice::transfer(uint8_t send) {
- uint8_t data = send;
- transfer(&data, 1);
- return data;
-}
-
-/*!
- * @brief Manually begin a transaction (calls beginTransaction if hardware
- * SPI)
- */
-void Adafruit_SPIDevice::beginTransaction(void) {
- if (_spi) {
-#ifdef BUSIO_HAS_HW_SPI
- _spi->beginTransaction(*_spiSetting);
-#endif
- }
-}
-
-/*!
- * @brief Manually end a transaction (calls endTransaction if hardware SPI)
- */
-void Adafruit_SPIDevice::endTransaction(void) {
- if (_spi) {
-#ifdef BUSIO_HAS_HW_SPI
- _spi->endTransaction();
-#endif
- }
-}
-
-/*!
- * @brief Assert/Deassert the CS pin if it is defined
- * @param value The state the CS is set to
- */
-void Adafruit_SPIDevice::setChipSelect(int value) {
- if (_cs != -1) {
- digitalWrite(_cs, value);
- }
-}
-
-/*!
- * @brief Write a buffer or two to the SPI device, with transaction
- * management.
- * @brief Manually begin a transaction (calls beginTransaction if hardware
- * SPI) with asserting the CS pin
- */
-void Adafruit_SPIDevice::beginTransactionWithAssertingCS() {
- beginTransaction();
- setChipSelect(LOW);
-}
-
-/*!
- * @brief Manually end a transaction (calls endTransaction if hardware SPI)
- * with deasserting the CS pin
- */
-void Adafruit_SPIDevice::endTransactionWithDeassertingCS() {
- setChipSelect(HIGH);
- endTransaction();
-}
-
-/*!
- * @brief Write a buffer or two to the SPI device, with transaction
- * management.
- * @param buffer Pointer to buffer of data to write
- * @param len Number of bytes from buffer to write
- * @param prefix_buffer Pointer to optional array of data to write before
- * buffer.
- * @param prefix_len Number of bytes from prefix buffer to write
- * @return Always returns true because there's no way to test success of SPI
- * writes
- */
-bool Adafruit_SPIDevice::write(const uint8_t *buffer, size_t len,
- const uint8_t *prefix_buffer,
- size_t prefix_len) {
- beginTransactionWithAssertingCS();
-
- // do the writing
-#if defined(ARDUINO_ARCH_ESP32)
- if (_spi) {
- if (prefix_len > 0) {
- _spi->transferBytes((uint8_t *)prefix_buffer, nullptr, prefix_len);
- }
- if (len > 0) {
- _spi->transferBytes((uint8_t *)buffer, nullptr, len);
- }
- } else
-#endif
- {
- for (size_t i = 0; i < prefix_len; i++) {
- transfer(prefix_buffer[i]);
- }
- for (size_t i = 0; i < len; i++) {
- transfer(buffer[i]);
- }
- }
- endTransactionWithDeassertingCS();
-
-#ifdef DEBUG_SERIAL
- DEBUG_SERIAL.print(F("\tSPIDevice Wrote: "));
- if ((prefix_len != 0) && (prefix_buffer != nullptr)) {
- for (uint16_t i = 0; i < prefix_len; i++) {
- DEBUG_SERIAL.print(F("0x"));
- DEBUG_SERIAL.print(prefix_buffer[i], HEX);
- DEBUG_SERIAL.print(F(", "));
- }
- }
- for (uint16_t i = 0; i < len; i++) {
- DEBUG_SERIAL.print(F("0x"));
- DEBUG_SERIAL.print(buffer[i], HEX);
- DEBUG_SERIAL.print(F(", "));
- if (i % 32 == 31) {
- DEBUG_SERIAL.println();
- }
- }
- DEBUG_SERIAL.println();
-#endif
-
- return true;
-}
-
-/*!
- * @brief Read from SPI into a buffer from the SPI device, with transaction
- * management.
- * @param buffer Pointer to buffer of data to read into
- * @param len Number of bytes from buffer to read.
- * @param sendvalue The 8-bits of data to write when doing the data read,
- * defaults to 0xFF
- * @return Always returns true because there's no way to test success of SPI
- * writes
- */
-bool Adafruit_SPIDevice::read(uint8_t *buffer, size_t len, uint8_t sendvalue) {
- memset(buffer, sendvalue, len); // clear out existing buffer
-
- beginTransactionWithAssertingCS();
- transfer(buffer, len);
- endTransactionWithDeassertingCS();
-
-#ifdef DEBUG_SERIAL
- DEBUG_SERIAL.print(F("\tSPIDevice Read: "));
- for (uint16_t i = 0; i < len; i++) {
- DEBUG_SERIAL.print(F("0x"));
- DEBUG_SERIAL.print(buffer[i], HEX);
- DEBUG_SERIAL.print(F(", "));
- if (len % 32 == 31) {
- DEBUG_SERIAL.println();
- }
- }
- DEBUG_SERIAL.println();
-#endif
-
- return true;
-}
-
-/*!
- * @brief Write some data, then read some data from SPI into another buffer,
- * with transaction management. The buffers can point to same/overlapping
- * locations. This does not transmit-receive at the same time!
- * @param write_buffer Pointer to buffer of data to write from
- * @param write_len Number of bytes from buffer to write.
- * @param read_buffer Pointer to buffer of data to read into.
- * @param read_len Number of bytes from buffer to read.
- * @param sendvalue The 8-bits of data to write when doing the data read,
- * defaults to 0xFF
- * @return Always returns true because there's no way to test success of SPI
- * writes
- */
-bool Adafruit_SPIDevice::write_then_read(const uint8_t *write_buffer,
- size_t write_len, uint8_t *read_buffer,
- size_t read_len, uint8_t sendvalue) {
- beginTransactionWithAssertingCS();
- // do the writing
-#if defined(ARDUINO_ARCH_ESP32)
- if (_spi) {
- if (write_len > 0) {
- _spi->transferBytes((uint8_t *)write_buffer, nullptr, write_len);
- }
- } else
-#endif
- {
- for (size_t i = 0; i < write_len; i++) {
- transfer(write_buffer[i]);
- }
- }
-
-#ifdef DEBUG_SERIAL
- DEBUG_SERIAL.print(F("\tSPIDevice Wrote: "));
- for (uint16_t i = 0; i < write_len; i++) {
- DEBUG_SERIAL.print(F("0x"));
- DEBUG_SERIAL.print(write_buffer[i], HEX);
- DEBUG_SERIAL.print(F(", "));
- if (write_len % 32 == 31) {
- DEBUG_SERIAL.println();
- }
- }
- DEBUG_SERIAL.println();
-#endif
-
- // do the reading
- for (size_t i = 0; i < read_len; i++) {
- read_buffer[i] = transfer(sendvalue);
- }
-
-#ifdef DEBUG_SERIAL
- DEBUG_SERIAL.print(F("\tSPIDevice Read: "));
- for (uint16_t i = 0; i < read_len; i++) {
- DEBUG_SERIAL.print(F("0x"));
- DEBUG_SERIAL.print(read_buffer[i], HEX);
- DEBUG_SERIAL.print(F(", "));
- if (read_len % 32 == 31) {
- DEBUG_SERIAL.println();
- }
- }
- DEBUG_SERIAL.println();
-#endif
-
- endTransactionWithDeassertingCS();
-
- return true;
-}
-
-/*!
- * @brief Write some data and read some data at the same time from SPI
- * into the same buffer, with transaction management. This is basicaly a wrapper
- * for transfer() with CS-pin and transaction management. This /does/
- * transmit-receive at the same time!
- * @param buffer Pointer to buffer of data to write/read to/from
- * @param len Number of bytes from buffer to write/read.
- * @return Always returns true because there's no way to test success of SPI
- * writes
- */
-bool Adafruit_SPIDevice::write_and_read(uint8_t *buffer, size_t len) {
- beginTransactionWithAssertingCS();
- transfer(buffer, len);
- endTransactionWithDeassertingCS();
-
- return true;
-}
generated by cgit v1.2.3 (git 2.46.0) at 2026-06-30 03:18:08 +0000