diff options
Diffstat (limited to '.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github')
3 files changed, 101 insertions, 0 deletions
diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/ISSUE_TEMPLATE.md b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/ISSUE_TEMPLATE.md new file mode 100644 index 0000000..f0e2614 --- /dev/null +++ b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/ISSUE_TEMPLATE.md @@ -0,0 +1,46 @@ +Thank you for opening an issue on an Adafruit Arduino library repository. To +improve the speed of resolution please review the following guidelines and +common troubleshooting steps below before creating the issue: + +- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use + the forums at http://forums.adafruit.com to ask questions and troubleshoot why + something isn't working as expected. In many cases the problem is a common issue + that you will more quickly receive help from the forum community. GitHub issues + are meant for known defects in the code. If you don't know if there is a defect + in the code then start with troubleshooting on the forum first. + +- **If following a tutorial or guide be sure you didn't miss a step.** Carefully + check all of the steps and commands to run have been followed. Consult the + forum if you're unsure or have questions about steps in a guide/tutorial. + +- **For Arduino projects check these very common issues to ensure they don't apply**: + + - For uploading sketches or communicating with the board make sure you're using + a **USB data cable** and **not** a **USB charge-only cable**. It is sometimes + very hard to tell the difference between a data and charge cable! Try using the + cable with other devices or swapping to another cable to confirm it is not + the problem. + + - **Be sure you are supplying adequate power to the board.** Check the specs of + your board and plug in an external power supply. In many cases just + plugging a board into your computer is not enough to power it and other + peripherals. + + - **Double check all soldering joints and connections.** Flakey connections + cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints. + + - **Ensure you are using an official Arduino or Adafruit board.** We can't + guarantee a clone board will have the same functionality and work as expected + with this code and don't support them. + +If you're sure this issue is a defect in the code and checked the steps above +please fill in the following fields to provide enough troubleshooting information. +You may delete the guideline and text above to just leave the following details: + +- Arduino board: **INSERT ARDUINO BOARD NAME/TYPE HERE** + +- Arduino IDE version (found in Arduino -> About Arduino menu): **INSERT ARDUINO + VERSION HERE** + +- List the steps to reproduce the problem below (if possible attach a sketch or + copy the sketch code in too): **LIST REPRO STEPS BELOW** diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/PULL_REQUEST_TEMPLATE.md b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/PULL_REQUEST_TEMPLATE.md new file mode 100644 index 0000000..7b641eb --- /dev/null +++ b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/PULL_REQUEST_TEMPLATE.md @@ -0,0 +1,26 @@ +Thank you for creating a pull request to contribute to Adafruit's GitHub code! +Before you open the request please review the following guidelines and tips to +help it be more easily integrated: + +- **Describe the scope of your change--i.e. what the change does and what parts + of the code were modified.** This will help us understand any risks of integrating + the code. + +- **Describe any known limitations with your change.** For example if the change + doesn't apply to a supported platform of the library please mention it. + +- **Please run any tests or examples that can exercise your modified code.** We + strive to not break users of the code and running tests/examples helps with this + process. + +Thank you again for contributing! We will try to test and integrate the change +as soon as we can, but be aware we have many GitHub repositories to manage and +can't immediately respond to every request. There is no need to bump or check in +on a pull request (it will clutter the discussion of the request). + +Also don't be worried if the request is closed or not integrated--sometimes the +priorities of Adafruit's GitHub code (education, ease of use) might not match the +priorities of the pull request. Don't fret, the open source community thrives on +forks and GitHub makes it easy to keep your changes in a forked repo. + +After reviewing the guidelines above you can delete this text from the pull request. diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/workflows/githubci.yml b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/workflows/githubci.yml new file mode 100644 index 0000000..e6a0871 --- /dev/null +++ b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/.github/workflows/githubci.yml @@ -0,0 +1,29 @@ +name: Arduino Library CI + +on: [pull_request, push, repository_dispatch] + +jobs: + build: + runs-on: ubuntu-latest + + steps: + - uses: actions/setup-python@v4 + with: + python-version: '3.x' + - uses: actions/checkout@v3 + - uses: actions/checkout@v3 + with: + repository: adafruit/ci-arduino + path: ci + + - name: pre-install + run: bash ci/actions_install.sh + + - name: test platforms + run: python3 ci/build_platform.py main_platforms giga + + - name: doxygen + env: + GH_REPO_TOKEN: ${{ secrets.GH_REPO_TOKEN }} + PRETTYNAME : "Adafruit NeoPixel Library" + run: bash ci/doxy_gen_and_deploy.sh |