2 files changed, 50 insertions, 0 deletions
diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/simple/.esp8266.test.skip b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/simple/.esp8266.test.skip
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/simple/.esp8266.test.skip
diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/simple/simple.ino b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/simple/simple.ino
new file mode 100644
index 0000000..09f458e
--- /dev/null
+++ b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/examples/simple/simple.ino
@@ -0,0 +1,50 @@
+// NeoPixel Ring simple sketch (c) 2013 Shae Erisson
+// Released under the GPLv3 license to match the rest of the
+// Adafruit NeoPixel library
+
+#include <Adafruit_NeoPixel.h>
+#ifdef __AVR__
+ #include <avr/power.h> // Required for 16 MHz Adafruit Trinket
+#endif
+
+// Which pin on the Arduino is connected to the NeoPixels?
+#define PIN        6 // On Trinket or Gemma, suggest changing this to 1
+
+// How many NeoPixels are attached to the Arduino?
+#define NUMPIXELS 16 // Popular NeoPixel ring size
+
+// When setting up the NeoPixel library, we tell it how many pixels,
+// and which pin to use to send signals. Note that for older NeoPixel
+// strips you might need to change the third parameter -- see the
+// strandtest example for more information on possible values.
+Adafruit_NeoPixel pixels(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);
+
+#define DELAYVAL 500 // Time (in milliseconds) to pause between pixels
+
+void setup() {
+  // These lines are specifically to support the Adafruit Trinket 5V 16 MHz.
+  // Any other board, you can remove this part (but no harm leaving it):
+#if defined(__AVR_ATtiny85__) && (F_CPU == 16000000)
+  clock_prescale_set(clock_div_1);
+#endif
+  // END of Trinket-specific code.
+
+  pixels.begin(); // INITIALIZE NeoPixel strip object (REQUIRED)
+}
+
+void loop() {
+  pixels.clear(); // Set all pixel colors to 'off'
+
+  // The first NeoPixel in a strand is #0, second is 1, all the way up
+  // to the count of pixels minus one.
+  for(int i=0; i<NUMPIXELS; i++) { // For each pixel...
+
+    // pixels.Color() takes RGB values, from 0,0,0 up to 255,255,255
+    // Here we're using a moderately bright green color:
+    pixels.setPixelColor(i, pixels.Color(0, 150, 0));
+
+    pixels.show();   // Send the updated pixel colors to the hardware.
+
+    delay(DELAYVAL); // Pause before next pass through loop
+  }
+}