1 files changed, 0 insertions, 152 deletions
diff --git a/.pio/libdeps/esp32-s3-n16r8/ArduinoJson/examples/JsonConfigFile/JsonConfigFile.ino b/.pio/libdeps/esp32-s3-n16r8/ArduinoJson/examples/JsonConfigFile/JsonConfigFile.ino
deleted file mode 100644
index 0709a6c..0000000
--- a/.pio/libdeps/esp32-s3-n16r8/ArduinoJson/examples/JsonConfigFile/JsonConfigFile.ino
+++ /dev/null
@@ -1,152 +0,0 @@
-// ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2026, Benoit BLANCHON
-// MIT License
-//
-// This example shows how to store your project configuration in a file.
-// It uses the SD library but can be easily modified for any other file-system.
-//
-// The file contains a JSON document with the following content:
-// {
-//   "hostname": "examples.com",
-//   "port": 2731
-// }
-//
-// To run this program, you need an SD card connected to the SPI bus as follows:
-// * MOSI <-> pin 11
-// * MISO <-> pin 12
-// * CLK  <-> pin 13
-// * CS   <-> pin 4
-//
-// https://arduinojson.org/v7/example/config/
-
-#include <ArduinoJson.h>
-#include <SD.h>
-#include <SPI.h>
-
-// Our configuration structure.
-struct Config {
-  char hostname[64];
-  int port;
-};
-
-const char* filename = "/config.txt";  // <- SD library uses 8.3 filenames
-Config config;                         // <- global configuration object
-
-// Loads the configuration from a file
-void loadConfiguration(const char* filename, Config& config) {
-  // Open file for reading
-  File file = SD.open(filename);
-
-  // Allocate a temporary JsonDocument
-  JsonDocument doc;
-
-  // Deserialize the JSON document
-  DeserializationError error = deserializeJson(doc, file);
-  if (error)
-    Serial.println(F("Failed to read file, using default configuration"));
-
-  // Copy values from the JsonDocument to the Config
-  config.port = doc["port"] | 2731;
-  strlcpy(config.hostname,                  // <- destination
-          doc["hostname"] | "example.com",  // <- source
-          sizeof(config.hostname));         // <- destination's capacity
-
-  // Close the file (Curiously, File's destructor doesn't close the file)
-  file.close();
-}
-
-// Saves the configuration to a file
-void saveConfiguration(const char* filename, const Config& config) {
-  // Delete existing file, otherwise the configuration is appended to the file
-  SD.remove(filename);
-
-  // Open file for writing
-  File file = SD.open(filename, FILE_WRITE);
-  if (!file) {
-    Serial.println(F("Failed to create file"));
-    return;
-  }
-
-  // Allocate a temporary JsonDocument
-  JsonDocument doc;
-
-  // Set the values in the document
-  doc["hostname"] = config.hostname;
-  doc["port"] = config.port;
-
-  // Serialize JSON to file
-  if (serializeJson(doc, file) == 0) {
-    Serial.println(F("Failed to write to file"));
-  }
-
-  // Close the file
-  file.close();
-}
-
-// Prints the content of a file to the Serial
-void printFile(const char* filename) {
-  // Open file for reading
-  File file = SD.open(filename);
-  if (!file) {
-    Serial.println(F("Failed to read file"));
-    return;
-  }
-
-  // Extract each characters by one by one
-  while (file.available()) {
-    Serial.print((char)file.read());
-  }
-  Serial.println();
-
-  // Close the file
-  file.close();
-}
-
-void setup() {
-  // Initialize serial port
-  Serial.begin(9600);
-  while (!Serial)
-    continue;
-
-  // Initialize SD library
-  const int chipSelect = 4;
-  while (!SD.begin(chipSelect)) {
-    Serial.println(F("Failed to initialize SD library"));
-    delay(1000);
-  }
-
-  // Should load default config if run for the first time
-  Serial.println(F("Loading configuration..."));
-  loadConfiguration(filename, config);
-
-  // Create configuration file
-  Serial.println(F("Saving configuration..."));
-  saveConfiguration(filename, config);
-
-  // Dump config file
-  Serial.println(F("Print config file..."));
-  printFile(filename);
-}
-
-void loop() {
-  // not used in this example
-}
-
-// Performance issue?
-// ------------------
-//
-// File is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v7/how-to/improve-speed/
-
-// See also
-// --------
-//
-// https://arduinojson.org/ contains the documentation for all the functions
-// used above. It also includes an FAQ that will help you solve any
-// serialization or deserialization problem.
-//
-// The book "Mastering ArduinoJson" contains a case study of a project that has
-// a complex configuration with nested members.
-// Contrary to this example, the project in the book uses the SPIFFS filesystem.
-// Learn more at https://arduinojson.org/book/
-// Use the coupon code TWENTY for a 20% discount ❤❤❤❤❤