1 files changed, 0 insertions, 150 deletions
diff --git a/firmware/cc1101.cpp b/firmware/cc1101.cpp
deleted file mode 100644
index dcbbbee..0000000
--- a/firmware/cc1101.cpp
+++ /dev/null
@@ -1,150 +0,0 @@
-#include <Arduino.h>
-#include "ELECHOUSE_CC1101_SRC_DRV.h"
-#include "cc1101.h"
-#include "config.h"
-
-// ===== CONFIG =====
-#define RAW_BUF_MAX 512
-
-// ===== STATE =====
-static bool cc1101Inited = false;
-
-// ===== CAPTURE STATE =====
-volatile unsigned long captureBuffer[RAW_BUF_MAX];
-volatile int pulseIndex = 0;
-volatile unsigned long lastEdgeTime = 0;
-volatile bool capturing = false;
-
-// ===== RF SETTINGS =====
-float currentFreq = 433.92;
-float dataRate = 3.79372;
-float deviation = 0.0;
-float rxBW = 325.0;
-int powerLevel = 10;
-
-// ===== ISR =====
-void IRAM_ATTR pulseISR()
-{
-    unsigned long now = micros();
-
-    if (!capturing) return;
-    if (pulseIndex >= RAW_BUF_MAX) return;
-
-    unsigned long duration = now - lastEdgeTime;
-
-    if (duration < 50) return;
-
-    captureBuffer[pulseIndex++] = duration;
-    lastEdgeTime = now;
-}
-
-// ===== OOK SETUP =====
-void setupOOKMode()
-{
-    ELECHOUSE_cc1101.SetRx();
-    ELECHOUSE_cc1101.setMHZ(currentFreq);
-
-    ELECHOUSE_cc1101.setModulation(0); // ASK/OOK
-    ELECHOUSE_cc1101.setDRate(dataRate);
-    ELECHOUSE_cc1101.setDeviation(0);
-    ELECHOUSE_cc1101.setRxBW(rxBW);
-    ELECHOUSE_cc1101.setSyncMode(0);
-    ELECHOUSE_cc1101.setPA(powerLevel);
-}
-
-// ===== INIT (LAZY, SAFE) =====
-bool initCC1101()
-{
-    if (cc1101Inited)
-        return true;
-
-    Serial.println("Initializing CC1101...");
-
-    // IMPORTANT: no detachInterrupt here (causes crash if not installed)
-
-    ELECHOUSE_cc1101.setSpiPin(
-        cc1101_SCK,
-        cc1101_MISO,
-        cc1101_MOSI,
-        CC1101_CS
-    );
-
-    ELECHOUSE_cc1101.setGDO(CC1101_GDO0, CC1101_GDO2);
-
-    if (!ELECHOUSE_cc1101.getCC1101())
-    {
-        Serial.println("❌ CC1101 NOT FOUND");
-        return false;
-    }
-
-    delay(10); // let SPI settle
-
-    ELECHOUSE_cc1101.Init();   // THIS WAS YOUR FREEZE POINT
-    setupOOKMode();
-
-    pinMode(CC1101_GDO0, INPUT);
-
-    Serial.println("✅ CC1101 READY");
-
-    cc1101Inited = true;
-    return true;
-}
-
-// ===== CAPTURE CONTROL =====
-void startCapture()
-{
-    pulseIndex = 0;
-    capturing = true;
-    lastEdgeTime = micros();
-
-    attachInterrupt(
-        digitalPinToInterrupt(CC1101_GDO0),
-        pulseISR,
-        CHANGE
-    );
-
-    Serial.println("Capture started");
-}
-
-bool isCC1101Ready() {
-    return cc1101Inited;
-}
-
-void stopCapture()
-{
-    capturing = false;
-
-    detachInterrupt(digitalPinToInterrupt(CC1101_GDO0));
-
-    Serial.println("Capture stopped");
-}
-
-// ===== DEBUG PRINT =====
-void printCapture()
-{
-    Serial.println("Captured pulses:");
-
-    for (int i = 0; i < pulseIndex; i++)
-    {
-        Serial.println(captureBuffer[i]);
-    }
-}
-
-
-// ===== REPLAY =====
-void replaySignal()
-{
-    Serial.println("Replaying...");
-
-    ELECHOUSE_cc1101.SetTx();
-    pinMode(CC1101_GDO0, OUTPUT);
-
-    for (int i = 0; i < pulseIndex; i++)
-    {
-        digitalWrite(CC1101_GDO0, (i % 2 == 0) ? HIGH : LOW);
-        delayMicroseconds(captureBuffer[i]);
-    }
-
-    digitalWrite(CC1101_GDO0, LOW);
-    ELECHOUSE_cc1101.SetRx();
-}