diff options
Diffstat (limited to 'test/ELECHOUSE_CC1101_SRC_DRV.h')
| -rw-r--r-- | test/ELECHOUSE_CC1101_SRC_DRV.h | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/test/ELECHOUSE_CC1101_SRC_DRV.h b/test/ELECHOUSE_CC1101_SRC_DRV.h new file mode 100644 index 0000000..136a9b5 --- /dev/null +++ b/test/ELECHOUSE_CC1101_SRC_DRV.h @@ -0,0 +1,194 @@ +/*
+ ELECHOUSE_CC1101.cpp - CC1101 module library
+ Copyright (c) 2010 Michael.
+ Author: Michael, <www.elechouse.com>
+ Version: November 12, 2010
+
+ This library is designed to use CC1101/CC1100 module on Arduino platform.
+ CC1101/CC1100 module is an useful wireless module.Using the functions of the
+ library, you can easily send and receive data by the CC1101/CC1100 module.
+ Just have fun!
+ For the details, please refer to the datasheet of CC1100/CC1101.
+----------------------------------------------------------------------------------------------------------------
+cc1101 Driver for RC Switch. Mod by Little Satan. With permission to modify and publish Wilson Shen (ELECHOUSE).
+----------------------------------------------------------------------------------------------------------------
+*/
+#ifndef ELECHOUSE_CC1101_SRC_DRV_h
+#define ELECHOUSE_CC1101_SRC_DRV_h
+
+#include <Arduino.h>
+
+//***************************************CC1101 define**************************************************//
+// CC1101 CONFIG REGSITER
+#define CC1101_IOCFG2 0x00 // GDO2 output pin configuration
+#define CC1101_IOCFG1 0x01 // GDO1 output pin configuration
+#define CC1101_IOCFG0 0x02 // GDO0 output pin configuration
+#define CC1101_FIFOTHR 0x03 // RX FIFO and TX FIFO thresholds
+#define CC1101_SYNC1 0x04 // Sync word, high INT8U
+#define CC1101_SYNC0 0x05 // Sync word, low INT8U
+#define CC1101_PKTLEN 0x06 // Packet length
+#define CC1101_PKTCTRL1 0x07 // Packet automation control
+#define CC1101_PKTCTRL0 0x08 // Packet automation control
+#define CC1101_ADDR 0x09 // Device address
+#define CC1101_CHANNR 0x0A // Channel number
+#define CC1101_FSCTRL1 0x0B // Frequency synthesizer control
+#define CC1101_FSCTRL0 0x0C // Frequency synthesizer control
+#define CC1101_FREQ2 0x0D // Frequency control word, high INT8U
+#define CC1101_FREQ1 0x0E // Frequency control word, middle INT8U
+#define CC1101_FREQ0 0x0F // Frequency control word, low INT8U
+#define CC1101_MDMCFG4 0x10 // Modem configuration
+#define CC1101_MDMCFG3 0x11 // Modem configuration
+#define CC1101_MDMCFG2 0x12 // Modem configuration
+#define CC1101_MDMCFG1 0x13 // Modem configuration
+#define CC1101_MDMCFG0 0x14 // Modem configuration
+#define CC1101_DEVIATN 0x15 // Modem deviation setting
+#define CC1101_MCSM2 0x16 // Main Radio Control State Machine configuration
+#define CC1101_MCSM1 0x17 // Main Radio Control State Machine configuration
+#define CC1101_MCSM0 0x18 // Main Radio Control State Machine configuration
+#define CC1101_FOCCFG 0x19 // Frequency Offset Compensation configuration
+#define CC1101_BSCFG 0x1A // Bit Synchronization configuration
+#define CC1101_AGCCTRL2 0x1B // AGC control
+#define CC1101_AGCCTRL1 0x1C // AGC control
+#define CC1101_AGCCTRL0 0x1D // AGC control
+#define CC1101_WOREVT1 0x1E // High INT8U Event 0 timeout
+#define CC1101_WOREVT0 0x1F // Low INT8U Event 0 timeout
+#define CC1101_WORCTRL 0x20 // Wake On Radio control
+#define CC1101_FREND1 0x21 // Front end RX configuration
+#define CC1101_FREND0 0x22 // Front end TX configuration
+#define CC1101_FSCAL3 0x23 // Frequency synthesizer calibration
+#define CC1101_FSCAL2 0x24 // Frequency synthesizer calibration
+#define CC1101_FSCAL1 0x25 // Frequency synthesizer calibration
+#define CC1101_FSCAL0 0x26 // Frequency synthesizer calibration
+#define CC1101_RCCTRL1 0x27 // RC oscillator configuration
+#define CC1101_RCCTRL0 0x28 // RC oscillator configuration
+#define CC1101_FSTEST 0x29 // Frequency synthesizer calibration control
+#define CC1101_PTEST 0x2A // Production test
+#define CC1101_AGCTEST 0x2B // AGC test
+#define CC1101_TEST2 0x2C // Various test settings
+#define CC1101_TEST1 0x2D // Various test settings
+#define CC1101_TEST0 0x2E // Various test settings
+
+//CC1101 Strobe commands
+#define CC1101_SRES 0x30 // Reset chip.
+#define CC1101_SFSTXON 0x31 // Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1).
+ // If in RX/TX: Go to a wait state where only the synthesizer is
+ // running (for quick RX / TX turnaround).
+#define CC1101_SXOFF 0x32 // Turn off crystal oscillator.
+#define CC1101_SCAL 0x33 // Calibrate frequency synthesizer and turn it off
+ // (enables quick start).
+#define CC1101_SRX 0x34 // Enable RX. Perform calibration first if coming from IDLE and
+ // MCSM0.FS_AUTOCAL=1.
+#define CC1101_STX 0x35 // In IDLE state: Enable TX. Perform calibration first if
+ // MCSM0.FS_AUTOCAL=1. If in RX state and CCA is enabled:
+ // Only go to TX if channel is clear.
+#define CC1101_SIDLE 0x36 // Exit RX / TX, turn off frequency synthesizer and exit
+ // Wake-On-Radio mode if applicable.
+#define CC1101_SAFC 0x37 // Perform AFC adjustment of the frequency synthesizer
+#define CC1101_SWOR 0x38 // Start automatic RX polling sequence (Wake-on-Radio)
+#define CC1101_SPWD 0x39 // Enter power down mode when CSn goes high.
+#define CC1101_SFRX 0x3A // Flush the RX FIFO buffer.
+#define CC1101_SFTX 0x3B // Flush the TX FIFO buffer.
+#define CC1101_SWORRST 0x3C // Reset real time clock.
+#define CC1101_SNOP 0x3D // No operation. May be used to pad strobe commands to two
+ // INT8Us for simpler software.
+//CC1101 STATUS REGSITER
+#define CC1101_PARTNUM 0x30
+#define CC1101_VERSION 0x31
+#define CC1101_FREQEST 0x32
+#define CC1101_LQI 0x33
+#define CC1101_RSSI 0x34
+#define CC1101_MARCSTATE 0x35
+#define CC1101_WORTIME1 0x36
+#define CC1101_WORTIME0 0x37
+#define CC1101_PKTSTATUS 0x38
+#define CC1101_VCO_VC_DAC 0x39
+#define CC1101_TXBYTES 0x3A
+#define CC1101_RXBYTES 0x3B
+
+//CC1101 PATABLE,TXFIFO,RXFIFO
+#define CC1101_PATABLE 0x3E
+#define CC1101_TXFIFO 0x3F
+#define CC1101_RXFIFO 0x3F
+
+//************************************* class **************************************************//
+class ELECHOUSE_CC1101
+{
+private:
+ void SpiStart(void);
+ void SpiEnd(void);
+ void GDO_Set (void);
+ void GDO0_Set (void);
+ void Reset (void);
+ void setSpi(void);
+ void RegConfigSettings(void);
+ void Calibrate(void);
+ void Split_PKTCTRL0(void);
+ void Split_PKTCTRL1(void);
+ void Split_MDMCFG1(void);
+ void Split_MDMCFG2(void);
+ void Split_MDMCFG4(void);
+public:
+ void Init(void);
+ byte SpiReadStatus(byte addr);
+ void setSpiPin(byte sck, byte miso, byte mosi, byte ss);
+ void addSpiPin(byte sck, byte miso, byte mosi, byte ss, byte modul);
+ void setGDO(byte gdo0, byte gdo2);
+ void setGDO0(byte gdo0);
+ void addGDO(byte gdo0, byte gdo2, byte modul);
+ void addGDO0(byte gdo0, byte modul);
+ void setModul(byte modul);
+ void setCCMode(bool s);
+ void setModulation(byte m);
+ void setPA(int p);
+ void setMHZ(float mhz);
+ void setChannel(byte chnl);
+ void setChsp(float f);
+ void setRxBW(float f);
+ void setDRate(float d);
+ void setDeviation(float d);
+ void SetTx(void);
+ void SetRx(void);
+ void SetTx(float mhz);
+ void SetRx(float mhz);
+ int getRssi(void);
+ byte getLqi(void);
+ void setSres(void);
+ void setSidle(void);
+ void goSleep(void);
+ void SendData(byte *txBuffer, byte size);
+ void SendData(char *txchar);
+ void SendData(byte *txBuffer, byte size, int t);
+ void SendData(char *txchar, int t);
+ byte CheckReceiveFlag(void);
+ byte ReceiveData(byte *rxBuffer);
+ bool CheckCRC(void);
+ void SpiStrobe(byte strobe);
+ void SpiWriteReg(byte addr, byte value);
+ void SpiWriteBurstReg(byte addr, byte *buffer, byte num);
+ byte SpiReadReg(byte addr);
+ void SpiReadBurstReg(byte addr, byte *buffer, byte num);
+ void setClb(byte b, byte s, byte e);
+ bool getCC1101(void);
+ byte getMode(void);
+ void setSyncWord(byte sh, byte sl);
+ void setAddr(byte v);
+ void setWhiteData(bool v);
+ void setPktFormat(byte v);
+ void setCrc(bool v);
+ void setLengthConfig(byte v);
+ void setPacketLength(byte v);
+ void setDcFilterOff(bool v);
+ void setManchester(bool v);
+ void setSyncMode(byte v);
+ void setFEC(bool v);
+ void setPRE(byte v);
+ void setPQT(byte v);
+ void setCRC_AF(bool v);
+ void setAppendStatus(bool v);
+ void setAdrChk(byte v);
+ bool CheckRxFifo(int t);
+};
+
+extern ELECHOUSE_CC1101 ELECHOUSE_cc1101;
+
+#endif
\ No newline at end of file |