1 files changed, 0 insertions, 267 deletions
diff --git a/test/test.ino b/test/test.ino
deleted file mode 100644
index 8a3fbdf..0000000
--- a/test/test.ino
+++ /dev/null
@@ -1,267 +0,0 @@
-#include <Arduino.h>
-#include <SPI.h>
-#include <RF24.h>
-#include <U8g2lib.h>
-#include <WiFi.h>
-#include "esp_bt.h"
-
-// ================= NRF24 =================
-#define CE1_PIN 10
-#define CSN1_PIN 11
-
-#define CE2_PIN 12
-#define CSN2_PIN 13
-
-#define NRF_SCK 18
-#define NRF_MISO 16
-#define NRF_MOSI 17
-
-// ================= OLED ==================
-#define OLED_SDA_PIN 8
-#define OLED_SCL_PIN 9
-
-// ================= Buttons ===============
-#define BTN_UP 4
-
-// =========================================
-
-// Third radio optional
-#define CE3_PIN 46
-#define CSN3_PIN 48
-
-SPIClass *NRF_SPI = nullptr;
-
-// RF24 radios
-RF24 RadioA(CE1_PIN, CSN1_PIN);
-RF24 RadioB(CE2_PIN, CSN2_PIN);
-
-// OLED
-U8G2_SSD1306_128X64_NONAME_F_HW_I2C u8g2(
-    U8G2_R0,
-    U8X8_PIN_NONE,
-    OLED_SCL_PIN,
-    OLED_SDA_PIN
-);
-
-enum OperationMode {
-    DEACTIVE_MODE,
-    BLE_MODULE,
-    Bluetooth_MODULE
-};
-
-OperationMode currentMode = DEACTIVE_MODE;
-
-// BLE advertising channels
-const byte ble_channels[] = {2, 26, 80};
-
-// Bluetooth hopping channels
-//const byte bluetooth_channels[] = {
-//    32, 34, 46, 48, 50, 52,
-//    0, 1, 2, 4, 6, 8,
-//    22, 24, 26, 28, 30,
-//    74, 76, 78, 80
-//};
-
-const byte bluetooth_channels[] = {
-    12, 17, 22, 27, 32,
-    37, 42, 47, 52, 57,
-    62, 67, 72
-};
-
-volatile bool modeChangeRequested = false;
-
-unsigned long lastButtonPressTime = 0;
-const unsigned long debounceDelay = 500;
-
-// =========================================
-// NRF CONFIG
-// =========================================
-
-void configureNrf(RF24 &radio) {
-
-    radio.begin(NRF_SPI);
-
-    radio.setAutoAck(false);
-    radio.stopListening();
-
-    radio.setRetries(0, 0);
-    radio.setPALevel(RF24_PA_MAX);
-    radio.setDataRate(RF24_2MBPS);
-
-    radio.disableCRC();
-}
-
-// =========================================
-
-void IRAM_ATTR handleButtonPress() {
-
-    unsigned long currentTime = millis();
-
-    if (currentTime - lastButtonPressTime > debounceDelay) {
-        modeChangeRequested = true;
-        lastButtonPressTime = currentTime;
-    }
-}
-
-// =========================================
-
-void configureRadio(RF24 &radio) {
-
-    configureNrf(radio);
-
-    radio.startConstCarrier(
-        RF24_PA_MAX,
-        40
-    );
-}
-
-// =========================================
-
-void initializeRadios() {
-
-    if (currentMode == DEACTIVE_MODE) {
-
-        RadioA.powerDown();
-        RadioB.powerDown();
-
-        return;
-    }
-
-    configureRadio(RadioA);
-    configureRadio(RadioB);
-}
-
-// =========================================
-
-void updateOLED() {
-
-    u8g2.clearBuffer();
-
-    u8g2.setFont(u8g2_font_6x10_tr);
-
-    u8g2.setCursor(0, 12);
-    u8g2.print("Mode:");
-
-    u8g2.setCursor(50, 12);
-
-    if (currentMode == BLE_MODULE) {
-        u8g2.print("BLE");
-    }
-    else if (currentMode == Bluetooth_MODULE) {
-        u8g2.print("BT");
-    }
-    else {
-        u8g2.print("OFF");
-    }
-
-    u8g2.setCursor(0, 30);
-    u8g2.print("R1:");
-    u8g2.print(RadioA.isChipConnected());
-
-    u8g2.setCursor(0, 45);
-    u8g2.print("R2:");
-    u8g2.print(RadioB.isChipConnected());
-
-    u8g2.setCursor(0, 60);
-    u8g2.print("R3:");
-
-    u8g2.sendBuffer();
-}
-
-// =========================================
-
-void checkModeChange() {
-
-    if (!modeChangeRequested)
-        return;
-
-    modeChangeRequested = false;
-
-    currentMode =
-        static_cast<OperationMode>(
-            (currentMode + 1) % 3
-        );
-
-    initializeRadios();
-
-    updateOLED();
-}
-
-// =========================================
-// SETUP
-// =========================================
-
-void setup() {
-
-    Serial.begin(115200);
-
-    // Disable ESP32 radios
-    esp_bt_controller_deinit();
-
-    WiFi.mode(WIFI_OFF);
-    btStop();
-
-    // SPI
-    NRF_SPI = new SPIClass(FSPI);
-
-    NRF_SPI->begin(
-        NRF_SCK,
-        NRF_MISO,
-        NRF_MOSI
-    );
-
-    // OLED
-    u8g2.begin();
-
-    // Button
-    pinMode(BTN_UP, INPUT_PULLUP);
-
-    attachInterrupt(
-        digitalPinToInterrupt(BTN_UP),
-        handleButtonPress,
-        FALLING
-    );
-
-    initializeRadios();
-
-    updateOLED();
-
-    Serial.println("Jammer initialized");
-}
-
-// =========================================
-// LOOP
-// =========================================
-
-void loop() {
-
-    checkModeChange();
-
-    if (currentMode == BLE_MODULE) {
-
-        byte channel =
-            ble_channels[
-                random(
-                    sizeof(ble_channels)
-                )
-            ];
-
-        RadioA.setChannel(channel);
-        RadioB.setChannel(channel);
-    }
-
-    else if (currentMode == Bluetooth_MODULE) {
-
-        byte channel =
-            bluetooth_channels[
-                random(
-                    sizeof(bluetooth_channels)
-                )
-            ];
-
-        RadioA.setChannel(channel);
-        RadioB.setChannel(channel);
-    }
-
-    delay(5);
-}