From 3120783000d0025b183b0397acaa8b769499eb38 Mon Sep 17 00:00:00 2001
From: krolyxon <me@krolyxon.com>
Date: Mon, 8 Jun 2026 23:10:46 +0530
Subject: Initial gh-pages firmware hosting

---
 .../esp32-s3-n16r8/Adafruit NeoPixel/rp2040_pio.h  | 63 ++++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 .pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/rp2040_pio.h

(limited to '.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/rp2040_pio.h')

diff --git a/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/rp2040_pio.h b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/rp2040_pio.h
new file mode 100644
index 0000000..5ee4c36
--- /dev/null
+++ b/.pio/libdeps/esp32-s3-n16r8/Adafruit NeoPixel/rp2040_pio.h	
@@ -0,0 +1,63 @@
+// -------------------------------------------------- //
+// This file is autogenerated by pioasm; do not edit! //
+// -------------------------------------------------- //
+
+// Unless you know what you are doing...
+// Lines 47 and 52 have been edited to set transmit bit count
+
+#if !PICO_NO_HARDWARE
+#include "hardware/pio.h"
+#endif
+
+// ------ //
+// ws2812 //
+// ------ //
+
+#define ws2812_wrap_target 0
+#define ws2812_wrap 3
+
+#define ws2812_T1 2
+#define ws2812_T2 5
+#define ws2812_T3 3
+
+static const uint16_t ws2812_program_instructions[] = {
+    //     .wrap_target
+    0x6221, //  0: out    x, 1            side 0 [2]
+    0x1123, //  1: jmp    !x, 3           side 1 [1]
+    0x1400, //  2: jmp    0               side 1 [4]
+    0xa442, //  3: nop                    side 0 [4]
+            //     .wrap
+};
+
+#if !PICO_NO_HARDWARE
+static const struct pio_program ws2812_program = {
+    .instructions = ws2812_program_instructions,
+    .length = 4,
+    .origin = -1,
+};
+
+static inline pio_sm_config ws2812_program_get_default_config(uint offset) {
+    pio_sm_config c = pio_get_default_sm_config();
+    sm_config_set_wrap(&c, offset + ws2812_wrap_target, offset + ws2812_wrap);
+    sm_config_set_sideset(&c, 1, false, false);
+    return c;
+}
+
+#include "hardware/clocks.h"
+static inline void ws2812_program_init(PIO pio, uint sm, uint offset, uint pin,
+                                       float freq, uint bits) {
+    pio_gpio_init(pio, pin);
+    pio_sm_set_consecutive_pindirs(pio, sm, pin, 1, true);
+    pio_sm_config c = ws2812_program_get_default_config(offset);
+    sm_config_set_sideset_pins(&c, pin);
+    sm_config_set_out_shift(&c, false, true,
+                            bits); // <----<<< Length changed to "bits"
+    sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);
+    int cycles_per_bit = ws2812_T1 + ws2812_T2 + ws2812_T3;
+    float div = clock_get_hz(clk_sys) / (freq * cycles_per_bit);
+    sm_config_set_clkdiv(&c, div);
+    pio_sm_init(pio, sm, offset, &c);
+    pio_sm_set_enabled(pio, sm, true);
+}
+
+#endif
-- 
cgit v1.2.3