From 3120783000d0025b183b0397acaa8b769499eb38 Mon Sep 17 00:00:00 2001 From: krolyxon Date: Mon, 8 Jun 2026 23:10:46 +0530 Subject: Initial gh-pages firmware hosting --- .pio/libdeps/esp32-s3-n16r8/RF24/docs/attiny.md | 81 +++++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 .pio/libdeps/esp32-s3-n16r8/RF24/docs/attiny.md (limited to '.pio/libdeps/esp32-s3-n16r8/RF24/docs/attiny.md') diff --git a/.pio/libdeps/esp32-s3-n16r8/RF24/docs/attiny.md b/.pio/libdeps/esp32-s3-n16r8/RF24/docs/attiny.md new file mode 100644 index 0000000..f048438 --- /dev/null +++ b/.pio/libdeps/esp32-s3-n16r8/RF24/docs/attiny.md @@ -0,0 +1,81 @@ +# ATTiny + +@tableofcontents + +ATTiny support for this library relies on the SpenceKonde ATTinyCore. Be sure to have added this core to the Arduino Boards Manager with [this install guide](http://highlowtech.org/?p=1695) + +See the included rf24ping85 example for pin info and usage + +@warning The ATTiny2313 is unsupported due to lack of sufficient memory resources + +Some versions of Arduino IDE may require a patch to allow use of the full program space on ATTiny. See [this resource](https://github.com/TCWORLD/ATTinyCore/tree/master/PCREL%20Patch%20for%20GCC) for the ATTiny patch. + +ATTiny board support initially added from [jscrane/RF24](https://github.com/jscrane/RF24) + +## Hardware Configuration + +By [tong67](https://github.com/tong67) + +### ATtiny25/45/85 Pin map with CE_PIN 3 and CSN_PIN 4 + +```text + +-\/-+ + NC PB5 1|o |8 Vcc --- nRF24L01 VCC, pin2 --- LED --- 5V +nRF24L01 CE, pin3 --- PB3 2| |7 PB2 --- nRF24L01 SCK, pin5 +nRF24L01 CSN, pin4 --- PB4 3| |6 PB1 --- nRF24L01 MOSI, pin6 +nRF24L01 GND, pin1 --- GND 4| |5 PB0 --- nRF24L01 MISO, pin7 + +----+ +``` + +### ATtiny25/45/85 Pin map with CE_PIN 3 and CSN_PIN 3 - PB3 and PB4 are free to use for application + +- Circuit idea from [NerdRalph's 3 pin solution](http://nerdralph.blogspot.ca/2014/01/nrf24l01-control-with-3-attiny85-pins.html) +- Original RC combination was 1K/100nF. 22K/10nF combination worked better. +- For best settle-time delay value in `RF24::csn()` the timingSearch3pin.ino sketch can be used. +- This configuration is enabled when CE_PIN and CSN_PIN are equal, e.g. both 3 +- Because CE is always high the power consumption is higher than for 5 pins solution + +```text + ^^ + +-\/-+ nRF24L01 CE, pin3 ------| // + PB5 1|o |8 Vcc --- nRF24L01 VCC, pin2 ------x----------x--|<|-- 5V + NC PB3 2| |7 PB2 --- nRF24L01 SCK, pin5 --|<|---x-[22k]--| LED + NC PB4 3| |6 PB1 --- nRF24L01 MOSI, pin6 1n4148 | +nRF24L01 GND, pin1 -x- GND 4| |5 PB0 --- nRF24L01 MISO, pin7 | + | +----+ | + |-----------------------------------------------||----x-- nRF24L01 CSN, pin4 + 10nF +``` + +### ATtiny24/44/84 Pin map with CE_PIN 8 and CSN_PIN 7 + +- Schematic provided and successfully tested by [Carmine Pastore](https://github.com/Carminepz) + +```text + +-\/-+ +nRF24L01 VCC, pin2 --- VCC 1|o |14 GND --- nRF24L01 GND, pin1 + PB0 2| |13 AREF + PB1 3| |12 PA1 + PB3 4| |11 PA2 --- nRF24L01 CE, pin3 + PB2 5| |10 PA3 --- nRF24L01 CSN, pin4 + PA7 6| |9 PA4 --- nRF24L01 SCK, pin5 +nRF24L01 MISO, pin7 --- PA6 7| |8 PA5 --- nRF24L01 MOSI, pin6 + +----+ +``` + +### ATtiny2313/4313 Pin map with CE_PIN 12 and CSN_PIN 13 + +```text + +-\/-+ + PA2 1|o |20 VCC --- nRF24L01 VCC, pin2 + PD0 2| |19 PB7 --- nRF24L01 SCK, pin5 + PD1 3| |18 PB6 --- nRF24L01 MOSI, pin6 + PA1 4| |17 PB5 --- nRF24L01 MISO, pin7 + PA0 5| |16 PB4 --- nRF24L01 CSN, pin4 + PD2 6| |15 PB3 --- nRF24L01 CE, pin3 + PD3 7| |14 PB2 + PD4 8| |13 PB1 + PD5 9| |12 PB0 +nRF24L01 GND, pin1 --- GND 10| |11 PD6 + +----+ +``` -- cgit v1.2.3