From 0a40daf4fad5c1593c6e1696ac0cab992c799e2e Mon Sep 17 00:00:00 2001 From: krolyxon Date: Mon, 4 May 2026 22:48:07 +0530 Subject: initial commit --- firmware/ELECHOUSE_CC1101_SRC_DRV.h | 194 ++++++++++++++++++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 firmware/ELECHOUSE_CC1101_SRC_DRV.h (limited to 'firmware/ELECHOUSE_CC1101_SRC_DRV.h') diff --git a/firmware/ELECHOUSE_CC1101_SRC_DRV.h b/firmware/ELECHOUSE_CC1101_SRC_DRV.h new file mode 100644 index 0000000..136a9b5 --- /dev/null +++ b/firmware/ELECHOUSE_CC1101_SRC_DRV.h @@ -0,0 +1,194 @@ +/* + ELECHOUSE_CC1101.cpp - CC1101 module library + Copyright (c) 2010 Michael. + Author: Michael, + Version: November 12, 2010 + + This library is designed to use CC1101/CC1100 module on Arduino platform. + CC1101/CC1100 module is an useful wireless module.Using the functions of the + library, you can easily send and receive data by the CC1101/CC1100 module. + Just have fun! + For the details, please refer to the datasheet of CC1100/CC1101. +---------------------------------------------------------------------------------------------------------------- +cc1101 Driver for RC Switch. Mod by Little Satan. With permission to modify and publish Wilson Shen (ELECHOUSE). +---------------------------------------------------------------------------------------------------------------- +*/ +#ifndef ELECHOUSE_CC1101_SRC_DRV_h +#define ELECHOUSE_CC1101_SRC_DRV_h + +#include + +//***************************************CC1101 define**************************************************// +// CC1101 CONFIG REGSITER +#define CC1101_IOCFG2 0x00 // GDO2 output pin configuration +#define CC1101_IOCFG1 0x01 // GDO1 output pin configuration +#define CC1101_IOCFG0 0x02 // GDO0 output pin configuration +#define CC1101_FIFOTHR 0x03 // RX FIFO and TX FIFO thresholds +#define CC1101_SYNC1 0x04 // Sync word, high INT8U +#define CC1101_SYNC0 0x05 // Sync word, low INT8U +#define CC1101_PKTLEN 0x06 // Packet length +#define CC1101_PKTCTRL1 0x07 // Packet automation control +#define CC1101_PKTCTRL0 0x08 // Packet automation control +#define CC1101_ADDR 0x09 // Device address +#define CC1101_CHANNR 0x0A // Channel number +#define CC1101_FSCTRL1 0x0B // Frequency synthesizer control +#define CC1101_FSCTRL0 0x0C // Frequency synthesizer control +#define CC1101_FREQ2 0x0D // Frequency control word, high INT8U +#define CC1101_FREQ1 0x0E // Frequency control word, middle INT8U +#define CC1101_FREQ0 0x0F // Frequency control word, low INT8U +#define CC1101_MDMCFG4 0x10 // Modem configuration +#define CC1101_MDMCFG3 0x11 // Modem configuration +#define CC1101_MDMCFG2 0x12 // Modem configuration +#define CC1101_MDMCFG1 0x13 // Modem configuration +#define CC1101_MDMCFG0 0x14 // Modem configuration +#define CC1101_DEVIATN 0x15 // Modem deviation setting +#define CC1101_MCSM2 0x16 // Main Radio Control State Machine configuration +#define CC1101_MCSM1 0x17 // Main Radio Control State Machine configuration +#define CC1101_MCSM0 0x18 // Main Radio Control State Machine configuration +#define CC1101_FOCCFG 0x19 // Frequency Offset Compensation configuration +#define CC1101_BSCFG 0x1A // Bit Synchronization configuration +#define CC1101_AGCCTRL2 0x1B // AGC control +#define CC1101_AGCCTRL1 0x1C // AGC control +#define CC1101_AGCCTRL0 0x1D // AGC control +#define CC1101_WOREVT1 0x1E // High INT8U Event 0 timeout +#define CC1101_WOREVT0 0x1F // Low INT8U Event 0 timeout +#define CC1101_WORCTRL 0x20 // Wake On Radio control +#define CC1101_FREND1 0x21 // Front end RX configuration +#define CC1101_FREND0 0x22 // Front end TX configuration +#define CC1101_FSCAL3 0x23 // Frequency synthesizer calibration +#define CC1101_FSCAL2 0x24 // Frequency synthesizer calibration +#define CC1101_FSCAL1 0x25 // Frequency synthesizer calibration +#define CC1101_FSCAL0 0x26 // Frequency synthesizer calibration +#define CC1101_RCCTRL1 0x27 // RC oscillator configuration +#define CC1101_RCCTRL0 0x28 // RC oscillator configuration +#define CC1101_FSTEST 0x29 // Frequency synthesizer calibration control +#define CC1101_PTEST 0x2A // Production test +#define CC1101_AGCTEST 0x2B // AGC test +#define CC1101_TEST2 0x2C // Various test settings +#define CC1101_TEST1 0x2D // Various test settings +#define CC1101_TEST0 0x2E // Various test settings + +//CC1101 Strobe commands +#define CC1101_SRES 0x30 // Reset chip. +#define CC1101_SFSTXON 0x31 // Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1). + // If in RX/TX: Go to a wait state where only the synthesizer is + // running (for quick RX / TX turnaround). +#define CC1101_SXOFF 0x32 // Turn off crystal oscillator. +#define CC1101_SCAL 0x33 // Calibrate frequency synthesizer and turn it off + // (enables quick start). +#define CC1101_SRX 0x34 // Enable RX. Perform calibration first if coming from IDLE and + // MCSM0.FS_AUTOCAL=1. +#define CC1101_STX 0x35 // In IDLE state: Enable TX. Perform calibration first if + // MCSM0.FS_AUTOCAL=1. If in RX state and CCA is enabled: + // Only go to TX if channel is clear. +#define CC1101_SIDLE 0x36 // Exit RX / TX, turn off frequency synthesizer and exit + // Wake-On-Radio mode if applicable. +#define CC1101_SAFC 0x37 // Perform AFC adjustment of the frequency synthesizer +#define CC1101_SWOR 0x38 // Start automatic RX polling sequence (Wake-on-Radio) +#define CC1101_SPWD 0x39 // Enter power down mode when CSn goes high. +#define CC1101_SFRX 0x3A // Flush the RX FIFO buffer. +#define CC1101_SFTX 0x3B // Flush the TX FIFO buffer. +#define CC1101_SWORRST 0x3C // Reset real time clock. +#define CC1101_SNOP 0x3D // No operation. May be used to pad strobe commands to two + // INT8Us for simpler software. +//CC1101 STATUS REGSITER +#define CC1101_PARTNUM 0x30 +#define CC1101_VERSION 0x31 +#define CC1101_FREQEST 0x32 +#define CC1101_LQI 0x33 +#define CC1101_RSSI 0x34 +#define CC1101_MARCSTATE 0x35 +#define CC1101_WORTIME1 0x36 +#define CC1101_WORTIME0 0x37 +#define CC1101_PKTSTATUS 0x38 +#define CC1101_VCO_VC_DAC 0x39 +#define CC1101_TXBYTES 0x3A +#define CC1101_RXBYTES 0x3B + +//CC1101 PATABLE,TXFIFO,RXFIFO +#define CC1101_PATABLE 0x3E +#define CC1101_TXFIFO 0x3F +#define CC1101_RXFIFO 0x3F + +//************************************* class **************************************************// +class ELECHOUSE_CC1101 +{ +private: + void SpiStart(void); + void SpiEnd(void); + void GDO_Set (void); + void GDO0_Set (void); + void Reset (void); + void setSpi(void); + void RegConfigSettings(void); + void Calibrate(void); + void Split_PKTCTRL0(void); + void Split_PKTCTRL1(void); + void Split_MDMCFG1(void); + void Split_MDMCFG2(void); + void Split_MDMCFG4(void); +public: + void Init(void); + byte SpiReadStatus(byte addr); + void setSpiPin(byte sck, byte miso, byte mosi, byte ss); + void addSpiPin(byte sck, byte miso, byte mosi, byte ss, byte modul); + void setGDO(byte gdo0, byte gdo2); + void setGDO0(byte gdo0); + void addGDO(byte gdo0, byte gdo2, byte modul); + void addGDO0(byte gdo0, byte modul); + void setModul(byte modul); + void setCCMode(bool s); + void setModulation(byte m); + void setPA(int p); + void setMHZ(float mhz); + void setChannel(byte chnl); + void setChsp(float f); + void setRxBW(float f); + void setDRate(float d); + void setDeviation(float d); + void SetTx(void); + void SetRx(void); + void SetTx(float mhz); + void SetRx(float mhz); + int getRssi(void); + byte getLqi(void); + void setSres(void); + void setSidle(void); + void goSleep(void); + void SendData(byte *txBuffer, byte size); + void SendData(char *txchar); + void SendData(byte *txBuffer, byte size, int t); + void SendData(char *txchar, int t); + byte CheckReceiveFlag(void); + byte ReceiveData(byte *rxBuffer); + bool CheckCRC(void); + void SpiStrobe(byte strobe); + void SpiWriteReg(byte addr, byte value); + void SpiWriteBurstReg(byte addr, byte *buffer, byte num); + byte SpiReadReg(byte addr); + void SpiReadBurstReg(byte addr, byte *buffer, byte num); + void setClb(byte b, byte s, byte e); + bool getCC1101(void); + byte getMode(void); + void setSyncWord(byte sh, byte sl); + void setAddr(byte v); + void setWhiteData(bool v); + void setPktFormat(byte v); + void setCrc(bool v); + void setLengthConfig(byte v); + void setPacketLength(byte v); + void setDcFilterOff(bool v); + void setManchester(bool v); + void setSyncMode(byte v); + void setFEC(bool v); + void setPRE(byte v); + void setPQT(byte v); + void setCRC_AF(bool v); + void setAppendStatus(bool v); + void setAdrChk(byte v); + bool CheckRxFifo(int t); +}; + +extern ELECHOUSE_CC1101 ELECHOUSE_cc1101; + +#endif \ No newline at end of file -- cgit v1.2.3