Migrate to PlatformIO

Now since i have been able to make PSRAM working with platformio, i
don't have to use this shitty Arduino-IDE anymore which does not even
allow me to use subfolders like a normal programmer would do

1 files changed, 0 insertions, 128 deletions

diff --git a/firmware/firmware.ino b/firmware/firmware.ino
deleted file mode 100644
index 83ba1f8..0000000
--- a/firmware/firmware.ino
+++ /dev/null
@@ -1,128 +0,0 @@
-#include <Arduino.h>
-#include <USB.h>
-#include <USBHIDKeyboard.h>
-
-#include <BLEDevice.h>
-#include <BLEScan.h>
-#include <BleMouse.h>
-
-#include <RF24.h>
-#include <nRF24L01.h>
-
-#include "ELECHOUSE_CC1101_SRC_DRV.h"
-
-#include <WiFi.h>
-#include <esp_wifi.h>
-
-#include <esp_chip_info.h>
-#include <esp_heap_caps.h>
-#include <esp_system.h>
-#include <SPI.h>
-
-
-#include "display.h"
-#include "buttons.h"
-#include "menu.h"
-
-#include "config.h"
-#include "cc1101.h"
-
-// ================= USB HID =================
-USBHIDKeyboard Keyboard;
-
-// ===== BLE MOUSE =====
-BleMouse bleMouse("Orion-RF", "Orion-RF", 100);
-
-
-RF24 radio1(CE1_PIN, CSN1_PIN);
-RF24 radio2(CE2_PIN, CSN2_PIN);
-SPIClass *RADIO_SPI;
-
-
-void deactivateNRF1() {
-  digitalWrite(CSN1_PIN, HIGH);
-  digitalWrite(CE1_PIN, LOW);
-}
-
-void deactivateNRF2() {
-  digitalWrite(CSN2_PIN, HIGH);
-  digitalWrite(CE2_PIN, LOW);
-}
-
-
-// ================= SYSTEM INFO =================
-void printSystemUsage()
-{
-    esp_chip_info_t chip_info;
-
-    esp_chip_info(&chip_info);
-
-    Serial.printf("CPU cores: %d\n", chip_info.cores);
-
-    Serial.printf(
-        "Free heap: %d bytes\n",
-        heap_caps_get_free_size(MALLOC_CAP_DEFAULT)
-    );
-
-    Serial.printf(
-        "PSRAM free: %d bytes\n",
-        heap_caps_get_free_size(MALLOC_CAP_SPIRAM)
-    );
-}
-
-void showSplash()
-{
-    u8g2.clearBuffer();
-
-    u8g2.setFont(u8g2_font_logisoso20_tr); // big font
-    u8g2.drawStr(10, 40, "Orion-RF");
-
-    u8g2.setFont(u8g2_font_5x8_tr); // small subtitle
-    u8g2.drawStr(25, 58, "Initializing...");
-
-    u8g2.sendBuffer();
-
-    delay(1500); // 1.5 sec
-}
-
-
-// ================= SETUP =================
-void setup()
-{
-    Serial.begin(115200);
-
-    displayInit();
-    showSplash();
-
-    buttonsInit();
-    menuInit();
-
-    delay(1500);
-
-    USB.begin();
-    Keyboard.begin();
-
-
-
-    // NRF SPI safety
-    //pinMode(CSN1_PIN, OUTPUT);
-    //digitalWrite(CSN1_PIN, HIGH);
-
-    //pinMode(CSN2_PIN, OUTPUT);
-    //digitalWrite(CSN2_PIN, HIGH);
-    deactivateNRF1();
-    deactivateNRF2();
-
-    RADIO_SPI = new SPIClass(FSPI);
-    RADIO_SPI->begin(NRF_SCK, NRF_MISO, NRF_MOSI);
-
-    printSystemUsage();
-
-    Serial.println("SYSTEM READY");
-}
-
-// ================= LOOP =================
-void loop()
-{
-   menuLoop();
-}