restructure to use rust source tree primarily

4 files changed, 0 insertions, 599 deletions

diff --git a/src/rf/cc1101.cpp b/src/rf/cc1101.cpp
deleted file mode 100644
index 7e11d0b..0000000
--- a/src/rf/cc1101.cpp
+++ /dev/null
@@ -1,357 +0,0 @@
-#include "cc1101.h"
-#include "config.h"
-#include "ELECHOUSE_CC1101_SRC_DRV.h"
-#include "ui/display.h"
-#include "utils/buttons.h"
-#include "SPI.h"
-#include <Arduino.h>
-
-// ===== CONFIG =====
-#define RAW_BUF_MAX 512
-
-// ===== STATE =====
-static bool cc1101Inited = false;
-
-// ===== CAPTURE STATE =====
-volatile unsigned long captureBuffer[RAW_BUF_MAX];
-volatile int pulseIndex = 0;
-volatile unsigned long lastEdgeTime = 0;
-volatile bool capturing = false;
-
-// ===== RF SETTINGS =====
-float currentFreq = 433.92;
-float dataRate = 3.79372;
-float deviation = 0.0;
-float rxBW = 325.0;
-int powerLevel = 10;
-
-// ===== ISR =====
-void IRAM_ATTR pulseISR() {
-    unsigned long now = micros();
-
-    if (!capturing)
-        return;
-    if (pulseIndex >= RAW_BUF_MAX)
-        return;
-
-    unsigned long duration = now - lastEdgeTime;
-
-    if (duration < 150)
-        return;
-
-    captureBuffer[pulseIndex++] = duration;
-    lastEdgeTime = now;
-}
-
-// ===== OOK SETUP =====
-void setupOOKMode() {
-    ELECHOUSE_cc1101.SetRx();
-    ELECHOUSE_cc1101.setMHZ(currentFreq);
-
-    ELECHOUSE_cc1101.setModulation(2); // ASK/OOK
-    ELECHOUSE_cc1101.setDRate(dataRate);
-    ELECHOUSE_cc1101.setDeviation(0);
-    ELECHOUSE_cc1101.setRxBW(rxBW);
-    ELECHOUSE_cc1101.setSyncMode(0);
-    ELECHOUSE_cc1101.setPA(powerLevel);
-}
-
-// ===== INIT (LAZY, SAFE) =====
-// ================= CC1101 INIT =================
-bool initCC1101() {
-    Serial.println();
-    Serial.println("===== CC1101 INIT =====");
-
-    // ===== SPI =====
-    SPI.begin(cc1101_SCK, cc1101_MISO, cc1101_MOSI, CC1101_CS);
-
-    pinMode(CC1101_CS, OUTPUT);
-    digitalWrite(CC1101_CS, HIGH);
-
-    delay(100);
-
-    // ===== GDO =====
-    ELECHOUSE_cc1101.setGDO(CC1101_GDO0, -1);
-
-    ELECHOUSE_cc1101.setSpiPin(cc1101_SCK, cc1101_MISO, cc1101_MOSI, CC1101_CS);
-
-    // ===== DETECT =====
-    Serial.println("Checking chip...");
-
-    if (!ELECHOUSE_cc1101.getCC1101()) {
-        Serial.println("❌ CC1101 NOT FOUND");
-        return false;
-    }
-
-    Serial.println("✅ CC1101 FOUND");
-
-    // ===== IMPORTANT =====
-    // DO NOT CALL Init()
-    // it freezes on some ESP32-S3 setups
-
-    // ===== MANUAL CONFIG =====
-    ELECHOUSE_cc1101.setMHZ(currentFreq);
-
-    // 2 = ASK/OOK
-    ELECHOUSE_cc1101.setModulation(2);
-
-    ELECHOUSE_cc1101.setDRate(dataRate);
-
-    ELECHOUSE_cc1101.setRxBW(rxBW);
-
-    ELECHOUSE_cc1101.setDeviation(0);
-
-    // disable sync requirement
-    ELECHOUSE_cc1101.setSyncMode(0);
-
-    ELECHOUSE_cc1101.setPA(powerLevel);
-
-    // async serial mode
-    ELECHOUSE_cc1101.setCCMode(0);
-
-    // enter RX
-    ELECHOUSE_cc1101.SetRx();
-
-    pinMode(CC1101_GDO0, INPUT);
-
-    Serial.println("✅ RX MODE READY");
-
-    cc1101Inited = true;
-    return true;
-}
-// ===== CAPTURE CONTROL =====
-void startCapture() {
-    pulseIndex = 0;
-    capturing = true;
-    lastEdgeTime = micros();
-
-    attachInterrupt(digitalPinToInterrupt(CC1101_GDO0), pulseISR, CHANGE);
-
-    Serial.println("Looking for RF... ");
-}
-
-bool isCC1101Ready() { return cc1101Inited; }
-
-void stopCapture() {
-    capturing = false;
-
-    detachInterrupt(digitalPinToInterrupt(CC1101_GDO0));
-
-    Serial.println("Capture stopped");
-}
-
-// ===== DEBUG PRINT =====
-void printCapture() {
-    Serial.println("Captured pulses:");
-
-    for (int i = 0; i < pulseIndex; i++) {
-        Serial.println(captureBuffer[i]);
-    }
-}
-
-// ================= REPLAY =================
-void replaySignal() {
-    Serial.println();
-    Serial.println("Replaying signal...");
-
-    stopCapture();
-
-    ELECHOUSE_cc1101.SetTx();
-
-    pinMode(CC1101_GDO0, OUTPUT);
-
-    for (int i = 0; i < pulseIndex; i++) {
-        digitalWrite(CC1101_GDO0, (i % 2 == 0) ? HIGH : LOW);
-
-        delayMicroseconds(captureBuffer[i]);
-    }
-
-    digitalWrite(CC1101_GDO0, LOW);
-
-    ELECHOUSE_cc1101.SetRx();
-
-    pinMode(CC1101_GDO0, INPUT);
-
-    Serial.println("Replay complete");
-}
-
-void captureAndDisplay() {
-    if (!cc1101Inited) {
-        if (!initCC1101()) {
-            u8g2.clearBuffer();
-            u8g2.setFont(u8g2_font_6x10_tr);
-            u8g2.drawStr(0, 20, "CC1101 Failed");
-            u8g2.sendBuffer();
-            return;
-        }
-    }
-
-    startCapture();
-
-    u8g2.clearBuffer();
-    u8g2.setFont(u8g2_font_6x10_tr);
-    u8g2.drawStr(0, 12, "CC1101 Capture");
-    u8g2.drawStr(0, 28, "Waiting RF...");
-    u8g2.drawStr(0, 60, "BACK = Exit");
-    u8g2.sendBuffer();
-
-    unsigned long lastSignal = millis();
-    int lastPulseCount = 0;
-
-    while (true) {
-        // signal detected
-        if (pulseIndex > lastPulseCount) {
-            lastPulseCount = pulseIndex;
-            lastSignal = millis();
-        }
-
-        // update OLED
-        u8g2.clearBuffer();
-        u8g2.setFont(u8g2_font_6x10_tr);
-
-        u8g2.drawStr(0, 12, "CC1101 Capture");
-
-        u8g2.setCursor(0, 28);
-        u8g2.print("Pulses: ");
-        u8g2.print(pulseIndex);
-
-        u8g2.setCursor(0, 42);
-        u8g2.print("Freq: ");
-        u8g2.print(currentFreq);
-        u8g2.print(" MHz");
-
-        if (pulseIndex > 0) {
-            u8g2.drawStr(0, 54, "Signal Detected");
-        } else {
-            u8g2.drawStr(0, 54, "Waiting...");
-        }
-
-        u8g2.sendBuffer();
-
-        // auto print once capture stabilizes
-        if (pulseIndex > 20 && (millis() - lastSignal > 1500)) {
-            stopCapture();
-
-            Serial.println();
-            Serial.println("===== RF CAPTURE =====");
-
-            for (int i = 0; i < pulseIndex; i++) {
-                Serial.print(captureBuffer[i]);
-                Serial.print(", ");
-            }
-
-            Serial.println();
-
-            u8g2.clearBuffer();
-            u8g2.setFont(u8g2_font_6x10_tr);
-            u8g2.drawStr(0, 15, "Capture Complete");
-
-            u8g2.setCursor(0, 35);
-        }
-    }
-}
-
-void handleMenu() {
-    if (!isCC1101Ready()) {
-        if (!initCC1101()) {
-            u8g2.clearBuffer();
-            u8g2.setFont(u8g2_font_6x10_tr);
-            u8g2.drawStr(0, 20, "CC1101 Failed");
-            u8g2.sendBuffer();
-            delay(1500);
-            return;
-        }
-    }
-
-    pulseIndex = 0;
-
-    startCapture();
-
-    // ===== CAPTURE FOR 5 SEC =====
-    unsigned long start = millis();
-
-    while (millis() - start < 5000) {
-        noInterrupts();
-        int count = pulseIndex;
-        interrupts();
-
-        u8g2.clearBuffer();
-        u8g2.setFont(u8g2_font_6x10_tr);
-
-        u8g2.drawStr(0, 12, "RF Capturing...");
-
-        u8g2.setCursor(0, 30);
-        u8g2.print("Pulses: ");
-        u8g2.print(count);
-
-        u8g2.sendBuffer();
-
-        delay(50);
-    }
-
-    stopCapture();
-
-    // ===== DISPLAY CAPTURE BUFFER =====
-    int scroll = 0;
-
-    while (1) {
-        noInterrupts();
-        int count = pulseIndex;
-        interrupts();
-
-        u8g2.clearBuffer();
-        u8g2.setFont(u8g2_font_5x8_tr);
-
-        u8g2.drawStr(0, 8, "Captured Buffer");
-
-        // display 6 lines
-        for (int i = 0; i < 6; i++) {
-            int idx = scroll + i;
-
-            if (idx >= count)
-                break;
-
-            noInterrupts();
-            unsigned long val = captureBuffer[idx];
-            interrupts();
-
-            char buf[32];
-
-            snprintf(buf, sizeof(buf), "%03d: %lu", idx, val);
-
-            u8g2.drawStr(0, 20 + (i * 8), buf);
-        }
-
-        u8g2.sendBuffer();
-
-        // scroll down
-        if (btnDown()) {
-            if (scroll < count - 1)
-                scroll++;
-
-            delay(120);
-        }
-
-        // scroll up
-        if (btnUp()) {
-            if (scroll > 0)
-                scroll--;
-
-            delay(120);
-        }
-
-        // replay
-        if (btnSelect()) {
-            replaySignal();
-            delay(300);
-        }
-
-        // exit
-        if (btnBack()) {
-            delay(150);
-            return;
-        }
-
-        delay(20);
-    }
-}
diff --git a/src/rf/cc1101.h b/src/rf/cc1101.h
deleted file mode 100644
index def6a2e..0000000
--- a/src/rf/cc1101.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#pragma once
-
-bool initCC1101();
-bool isCC1101Ready();
-
-void captureAndDisplay();
-
-void handleMenu();
-void startCapture();
-void stopCapture();
-void printCapture();
-void replaySignal();
diff --git a/src/rf/nrf24.cpp b/src/rf/nrf24.cpp
deleted file mode 100644
index 0b0ed90..0000000
--- a/src/rf/nrf24.cpp
+++ /dev/null
@@ -1,217 +0,0 @@
-#include "nrf24.h"
-#include "ui/display.h"
-#include "utils/buttons.h"
-#include <Arduino.h>
-#include <RF24.h>
-#define JAM_DURATION 500
-
-extern SPIClass *RADIO_SPI;
-extern RF24 radio1;
-extern RF24 radio2;
-
-// ============ CHANNELS =============
-const byte bleChannels[] = {2, 26, 80};
-const byte bluetoothChannels[] = {32, 34, 46, 48, 50, 52, 0,  1,  2,  4, 6,
-                                  8,  22, 24, 26, 28, 30, 74, 76, 78, 80};
-const byte wifiChannels[] = {12, 17, 22, 27, 32, 37, 42,
-                             47, 52, 57, 62, 67, 72};
-const byte usbWireless_channels[] = {40, 50, 60};
-const byte videoTransmitter_channels[] = {70, 75, 80};
-const byte zigbee_channels[] = {11, 15, 20, 25};
-const byte rc_channels[] = {1, 3, 5, 7};
-
-void initNRF(RF24 &radio) {
-    if (!radio.begin(RADIO_SPI)) {
-        Serial.println("NRF not found");
-        return;
-    }
-
-    radio.setAutoAck(false);
-    radio.stopListening();
-    radio.setRetries(0, 0);
-    radio.setPALevel(RF24_PA_MAX, true);
-    radio.setDataRate(RF24_2MBPS);
-    radio.openWritingPipe(0xE7E7E7E7E7LL);
-    radio.setCRCLength(RF24_CRC_DISABLED);
-    Serial.println("NRF Initialized");
-}
-
-// void startBleJammer() {
-//     initNRF(radio1);
-//     initNRF(radio2);
-//
-//     Serial.println("NRF JAMMER STARTED");
-//
-//     const char payload[] = "xxxxxxxxxxxxxxxx";
-//
-//     u8g2.clearBuffer();
-//     u8g2.drawStr(0, 10, "Jamming:");
-//     u8g2.setCursor(60, 10);
-//     u8g2.print("Bluetooth");
-//     u8g2.sendBuffer();
-//
-//     while(true) {
-//
-//     // Channels (you can change this set)
-//     const byte channels[] = {2, 26, 80};
-//
-//
-//     for (int i = 0; i < sizeof(channels); i++) {
-//         radio1.setChannel(channels[i]);
-//         radio1.write(&payload, sizeof(payload));
-//         //radio2.setChannel(channels[i]);
-//         //radio2.write(&payload, sizeof(payload));
-//     }
-//
-//      if (btnBack())
-//     {
-//         Serial.println("Jammer stopped");
-//         return;
-//     }
-//     }
-//
-// }
-//
-// void startBluetoothJammer()
-//{
-//     initNRF(radio1);
-//     initNRF(radio2);
-//
-//     Serial.println("NRF JAMMER STARTED");
-//
-//     const char payload[] = "xxxxxxxxxxxxxxxx";
-//
-//     u8g2.clearBuffer();
-//     u8g2.drawStr(0, 10, "Jamming:");
-//     u8g2.setCursor(60, 10);
-//     u8g2.print("Bluetooth");
-//     u8g2.sendBuffer();
-//
-//     while(true) {
-//
-//     // Channels (you can change this set)
-//     const byte channels[] = {32, 34, 46, 48, 50, 52, 0, 1, 2, 4, 6, 8, 22,
-//     24, 26, 28, 30, 74, 76, 78, 80};
-//
-//
-//     for (int i = 0; i < sizeof(channels); i++) {
-//         radio1.setChannel(channels[i]);
-//         radio1.write(&payload, sizeof(payload));
-//         //radio2.setChannel(channels[i]);
-//         //radio2.write(&payload, sizeof(payload));
-//     }
-//
-//      if (btnBack())
-//     {
-//         Serial.println("Jammer stopped");
-//         return;
-//     }
-//     }
-// }
-
-void startJammer(const char *name, const byte *channels, size_t channelCount) {
-    initNRF(radio1);
-    initNRF(radio2);
-
-    Serial.println("NRF JAMMER STARTED");
-
-    const char payload[] = "xxxxxxxxxxxxxxxx";
-
-    u8g2.clearBuffer();
-    u8g2.setFont(u8g2_font_6x10_tr);
-    u8g2.drawStr(0, 15, "NRF24 Jammer");
-    u8g2.drawStr(0, 35, name);
-    u8g2.drawStr(0, 55, "BACK = Exit");
-    u8g2.sendBuffer();
-
-    while (true) {
-        for (size_t i = 0; i < channelCount; i++) {
-            // radio1.setChannel(channels[i]);
-            // radio1.write(&payload, sizeof(payload));
-
-            // Optional second NRF
-            // radio2.setChannel(channels[i]);
-            // radio2.write(&payload, sizeof(payload));
-
-            radio1.setChannel(channels[i]);
-            radio2.setChannel(channels[(i + 1) % channelCount]);
-
-            radio1.writeFast(&payload, sizeof(payload));
-            radio2.writeFast(&payload, sizeof(payload));
-        }
-
-        if (btnBack()) {
-            Serial.println("Jammer stopped");
-            radio1.powerDown();
-            radio2.powerDown();
-            return;
-        }
-    }
-
-    // while (true) {
-    // for (size_t i = 0; i < channelCount; i++)
-    //{
-    //     radio1.setChannel(channels[i]);
-    //     radio2.setChannel(channels[(i + 1) % channelCount]);
-
-    //    radio1.writeFast(&payload, sizeof(payload));
-    //    radio2.writeFast(&payload, sizeof(payload));
-
-    //    radio1.txStandBy(1);
-    //    radio2.txStandBy(1);
-
-    //    delayMicroseconds(200);
-    //}
-
-    // if (btnBack())
-    //{
-    //     Serial.println("Jammer stopped");
-
-    //    radio1.powerDown();
-    //    radio2.powerDown();
-
-    //    return;
-    //}
-    //}
-}
-
-void NRFToolsMenu(int index) {
-    switch (index) {
-    case 0:
-        // startBleJammer();
-        // BLE
-        startJammer("BLE", bleChannels,
-                    sizeof(bleChannels) / sizeof(bleChannels[0]));
-
-        break;
-    case 1:
-        // startBluetoothJammer();
-        // Bluetooth
-        startJammer("Bluetooth", bluetoothChannels,
-                    sizeof(bluetoothChannels) / sizeof(bluetoothChannels[0]));
-        break;
-
-    case 2:
-        startJammer("WiFi", wifiChannels,
-                    sizeof(wifiChannels) / sizeof(wifiChannels[0]));
-        break;
-    case 3:
-        startJammer("USB Wireless", usbWireless_channels,
-                    sizeof(usbWireless_channels) /
-                        sizeof(usbWireless_channels[0]));
-        break;
-    case 4:
-        startJammer("Video TX", videoTransmitter_channels,
-                    sizeof(videoTransmitter_channels) /
-                        sizeof(videoTransmitter_channels[0]));
-        break;
-    case 5:
-        break;
-        startJammer("RC", rc_channels,
-                    sizeof(rc_channels) / sizeof(rc_channels[0]));
-        break;
-    case 6:
-
-        break;
-    }
-}
diff --git a/src/rf/nrf24.h b/src/rf/nrf24.h
deleted file mode 100644
index 6d7f7d8..0000000
--- a/src/rf/nrf24.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#pragma once
-
-#include <RF24.h>
-
-// Initialization
-void initNRF(RF24 &radio);
-
-void startBluetoothJammer();
-void startBleJammer();
-
-void startJammer(const char *name, const byte *channels, size_t channelCount);
-
-void NRFToolsMenu(int index);