bench51 — an 8051 assembler, simulator & debugger

A small, Keil µVision-style IDE for the Intel 8051, in two flavours: a TUI that runs in your terminal, and a desktop GUI (bench51-gui) laid out like µVision. Write assembly in the built-in editor, assemble it, inspect the listing and Intel HEX output, then run, pause and single-step the program while watching registers, SFRs, memory, ports, timers, interrupts and the serial port.

Built in Rust with ratatui and egui. It is a learning tool, not a cycle-exact replacement for a vendor simulator.

Editor + assembled listing	Breakpoint inside a timer ISR, SFR view
Assembler errors in the gutter and Errors tab	Intel HEX output

Why this exists

I had microcontroller practicals to get through, and the course expects you to use Keil µVision. Keil µVision doesn't run on Linux. Rather than fight with Wine or a Windows VM every lab session, I wrote my own: bench51 does the parts of µVision those practicals actually need (write the code, assemble it, look at the listing and HEX, step through it and watch the registers) right in the terminal.

Features

• Editor with undo/redo, breakpoint and error markers in the gutter — or press Ctrl-G to edit in your own $EDITOR (vim, nvim, nano, …).
• Two-pass assembler for the full 8051 instruction set (all 255 opcodes):
  • labels, expressions (+ - * / MOD AND OR XOR NOT SHL SHR HIGH LOW, $)
  • number formats 42, 2Ah, 0x2A, 101010b, 52o, '*'
  • bit addressing (P1.3, ACC.7, 20h.0) and all predefined SFR/bit names
  • directives ORG DB DW DS END EQU SET BIT DATA IDATA XDATA CODE CSEG AT
  • generic JMP/CALL (assembled as LJMP/LCALL)
  • Keil-style .lst listing with symbol table, Intel HEX output
• Simulator
  • all instructions with correct flags (CY, AC, OV, P) and machine-cycle counts
  • 4 register banks, 256 bytes IRAM, SFRs, 64K code, 64K XRAM
  • ports P0–P3 with latch vs. pin semantics (read-modify-write reads the latch)
  • timers 0/1 in modes 0–3, gate and counter inputs
  • interrupts: INT0, T0, INT1, T1, serial; two priority levels; edge/level triggers
  • UART in modes 0–3 with baud rate timing from timer 1
  • idle and power-down modes (PCON)
• Debugger: run / pause, step into / over / out, run to cursor, breakpoints, changed-value highlighting, memory poke, adjustable speed.
• Open .hex files: they're disassembled into editable source that re-assembles to the identical image.

Usage

cargo install --path .                               # installs the `bench51` binary

cargo run --release -- examples/serial_hello.asm      # open in the TUI
cargo run --release                                   # start with a template
cargo run --release -- firmware.hex                   # disassemble & debug a HEX file

# Headless assembly: writes prog.hex and prog.lst
cargo run --release -- --assemble prog.asm
cargo run --release -- --assemble prog.asm -o out.hex --lst out.lst

--clock <MHz> sets the oscillator frequency used for the elapsed-time display (default 11.0592).

Desktop GUI

bench51-gui is the same assembler and simulator behind a µVision-style window: menus and toolbar, a Project window, the editor with breakpoint gutter, Build Output, and in a debug session the Registers, Disassembly, Memory, Symbols, UART #1, Ports, Timers and Interrupts windows. Every window docks and tabs wherever you drag it; the edit and debug layouts are remembered separately, as in µVision. It follows a monochrome, dot-matrix design (Space Grotesk, Space Mono and Doto, bundled) in a dark and a light theme.

Editor + build output	Breakpoint in a timer ISR, light theme
Peripheral windows, rearranged	Assembler errors

cargo install --path crates/bench51-gui                  # installs `bench51-gui`

cargo run --release -p bench51-gui                        # welcome screen
cargo run --release -p bench51-gui -- examples/*.asm      # open several files
cargo run --release -p bench51-gui -- --theme light firmware.hex

--theme system|dark|light overrides the theme chosen in View → Theme, and --clock <MHz> the Xtal set in Project → Options for Target.

The keys are µVision's, with the TUI's as aliases:

Click the gutter to toggle a breakpoint, double-click a byte in Memory to change it, click a pin in Ports to hold it low from outside, and click the bit chips in Registers, Timers and Interrupts to flip SFR bits. Files can be dropped onto the window.

On Linux it runs on Wayland and X11 and uses the XDG desktop portal for file dialogs. To add it to your application launcher:

install -Dm644 crates/bench51-gui/assets/bench51-gui.desktop ~/.local/share/applications/bench51-gui.desktop
install -Dm644 crates/bench51-gui/assets/bench51-gui.svg ~/.local/share/icons/hicolor/scalable/apps/bench51-gui.svg

It also builds for Windows and macOS. On Debian or Ubuntu, first install the packages egui needs: libxcb-render0-dev libxcb-shape0-dev libxcb-xfixes0-dev libxkbcommon-dev libssl-dev.

Keys

Edit mode: Alt-1/2/3 switch between Listing, HEX and Errors; Alt-↑/↓, Alt-PgUp/PgDn scroll them. The editor uses Emacs-style keys (Ctrl-U undo, Ctrl-R redo, Ctrl-Y paste).

Debug mode: Tab cycles focus between Source, Memory, Ports and Serial. Letter shortcuts work too, for terminals that swallow function keys: r run/pause, s step, n step over, o step out, g run to cursor, b breakpoint, x reset, i/f/d/c show IRAM/SFR/XRAM/CODE, p poke memory, +/- speed, . jump to PC, Esc pause / back to editor.

• Ports: select a pin and press Space to pull it low from outside (a button press); the program sees the pin as latch AND external level.
• Serial: type a line and press Enter to send it (followed by CR) to the 8051's receiver; everything the 8051 transmits appears above.

Examples

Notes and limitations

• Indirect addressing reaches all 256 bytes of IRAM (8052-style upper 128).
• Serial input has no 9th data bit; in modes 2/3 RB8 reads 0.
• No 8052 timer 2, external code memory or on-chip peripherals of derivatives.

Development

cargo test --workspace     # assembler, CPU, peripheral, session and example-program tests
cargo clippy --workspace --all-targets

Code layout:

• crates/bench51-core/, shared by both front ends: isa.rs (opcode table), asm/ (assembler, listing, Intel HEX), sim/ (CPU, peripherals, disassembler), session.rs (build, run, step and breakpoints), syntax.rs (highlighting tokens), files.rs (HEX loading)
• src/ is the bench51 TUI (ratatui).
• crates/bench51-gui/ is the bench51-gui desktop app (egui).